Suspension Restoration Parts Energy Suspension
TOYOTA
Go back to the index page
We have all these polyurethane bushings bushings in stock in the color
Black Graphite Impregnated.
 Red is available as a special order, allow 4-6 weeks for delivery.
If you wanted it today, you should have ordered it from us yesterday.
Tacoma Pickup 2 WD
(except T-100 & Tundra)
Please read all footnotes (..)
How do we define the word 'SET'.  
A 'SET' has enough bushings to do the left and right sides of vehicle.
Control arm bushing sets will also include lower & upper positions, if required.   
Body mount sets always include core/radiator/fender support bushings.
YEAR FRONT END CONTROL
ARM BUSHING
SET
 You must re-use
all metal parts. 
This includes the outer metal shells.  Do not remove with an air chisel.
 RACK & PINION BUSHINGS
  have NOT been made for the
2 wheel drive trucks. 
See note below.
 STRUT ROD
BUSHING
SET		 REAR LEAF SPRING BUSHING
SET		 FRONT SWAY BAR FRAME BUSHING SET (PAIR)
The sway bar sets do not include the metal brackets.
Please measure the diameter of the sway bar before ordering.
COMPLETE BODY(CAB) MOUNT
SET
 		TIE-ROD BOOTS (pair)
2001-04
 n/a
 n/a
 n/a
 n/a
 n/a
 8.4107
$91.00
 n/a
95-00
n/a
 n/a
Prothane Brand only
1996-04  18-1202
$20.00
n/a
8.5123 (25mm) $33.00
 8.4103
$80.00
9.13101
$4.00
Weight





0.2#
89 - 94 8.3106 (2)
You must re-use
all metal parts. 
This includes the outer metal shells.  Do not remove with an air chisel.
$36.00 		n/a
 8.7103
$19.00 		8.2107
$24.00 		8.5105 (23mm) $28.00
 8.5104 (25mm) $28.00		 n/a
 		9.-13101
$4.00
Weight





0.2#
84 - 88 8.3103 (2)
You must re-use
all metal parts. 
This includes the outer metal shells.  Do not remove with an air chisel.
$36.00 		n/a
 8.7103
$19.00 		8.2103
$22.00 		8.5103 (18mm) $28.00
 8.5104 (25mm) $28.00		 n/a
 		9.13101
$4.00
Weight





0.2#
79 - 83 8.3102 (2)
You must re-use
all metal parts. 
This includes the outer metal shells.  Do not remove with an air chisel.
$36.00 		n/a
 8.7103
$19.00 		8.2101
$19.00 		8.5103 (18mm) $28.00
 8.5104 (25mm) $28.00		 n/a
 		9.13101
$4.00
Weight





0.2#

RACK & PINION BUSHINGS
Several people have called to ask if the 4 wd rack and pinion bushings will fit the 2 wd trucks.  We do not know and neither does Energy Suspension.  E.S. will not comment until they have sucessfully installed the bushings into a 2 wd truck.  DO NOT install an 8.10101 or 8.10103 on a 2 wd. truck.

FOOTNOTES
(2) Must reuse existing outer metal shells.  Neither Energy Suspension or Prothane make control arm bushings with the outer metal shells, for Toyota vehicles.  Do you want to learn how to remove the old rubber bushings from the control arms?   See this page:  SUSPENSION tips & suggestion page
 (57) Must reuse all metal parts

Tacoma Pickup 4 wd
(except T-100 & Tundra)
Read all the footnotes( ) at the bottom of the table 

How do we define the word 'SET'.  
A 'SET' has enough bushings to do the left and right sides of vehicle.
Control arm bushing sets will also include lower & upper positions, if required.   
Body mount sets always include core/radiator/fender support bushings.
YEAR
FRONT END CONTROL ARM BUSHING
SET
 You must re-use
all metal parts. 
This includes the outer metal shells.  Do not remove with an air chisel.
 FRONT RACK & PINION BUSHING SET
only fits 4 wd.
FRONT LEAF SPRING BUSHING SET
includes front frame shackle set
FRONT FRAME SHACKLE BUSHING SET -
4 BUSHINGS ONLY
REAR LEAF SPRING BUSHING
SET
REAR FRAME SHACKLE BUSHING SET -
4 BUSHINGS ONLY
COMPLETE BODY(CAB) MOUNT SET
COMPLETE FRONT SWAY BAR BUSHING SET
The sway bar sets do not include the metal brackets.
Please measure the diameter of the sway bar before ordering.
TIE-ROD BOOTS
pair
2001-04
 8.3115 (2)
You must re-use
all metal parts. 
This includes the outer metal shells.  Do not remove with an air chisel.
$43.00		 8.10103
$19.00
in stock in the colors black and Red.
Does all three positions
 N/R
 N/R
 8.2108
$41.00		 N/A
 8.4107
$91.00
 8.5117 (26 MM)
8.5118 (27 MM)
$15.00
Prothane brand only
18-1114  27 mm
$12.00		 9.13101 $4.00
95 1/2 -00
8.3115 (2)
You must re-use
all metal parts. 
This includes the outer metal shells.  Do not remove with an air chisel.
$43.00
 8.10101
$14.00
Does all three positions
n/a
n/a
8.2108
$41.00
8.2111
(2092)
$9.00
8.4103
$80.00
8.5117 (26 MM)
8.5118 (27 MM)
$15.00
Prothane brand only
18-1114  27 mm
$12.00
9.13101 $4.00
Weight
 1.8#
 1.1#

1.9#
 0.5#
 4.3#
 0.8#
 0.2#
89 - 95 8.3108 (2)
You must re-use
all metal parts. 
This includes the outer metal shells.  Do not remove with an air chisel.
$49.00		 N/A
 n/a n/a 8.2108
$41.00 		8.2111
(2092)
$9.00 		8.4103
$80.00 		8.5106 (24mm)
$25.00		 9.13101 $4.00
Weight
 1.6#


1.9#
 0.5#
 4.3#
 1.6#
 0.2#
86 - 88 8.3104 (2)
Uppers only
 You must re-use
all metal parts. 
This includes the outer metal shells.  Do not remove with an air chisel.
$33.00
8.3105 (2)
Lowers only. 
 You must re-use
all metal parts. 
This includes the outer metal shells.  Do not remove with an air chisel.
$25.00
 N/A
 n/a n/a 8.2103
$23.00 		8.2109
(2030)
$7.00 		8.4101
$60.00 		8.5101 (19mm) $15.00
 8.5102 (23mm) $15.00		 9.13101 $4.00
Weight
 1.0# / 0.7#


1.9#
 0.4#
 1.8#
 0.5#
 0.2#
84 - 85 n/a N/A
 8.2102
$20.00 		8.2104
$9.00 		8.2103
$23.00 		8.2109
(2030)
$7.00 		8.4101
$60.00 		8.5101 (19mm) $15.00
 8.5102 (23mm) $15.00		 9.13101 $4.00
Weight

1.0#
 0.5#
 1.4#
 0.4#
 1.8#
 0.5#
 0.2#
79 - 83 n/a N/A
 8.2102
$20.00 		8.2104
$9.00 		8.2101
$20.00 		8.2109
(2030)
$7.00 		8.4101
$60.00 		8.5101 (19mm) $15.00
 8.5102 (23mm) $15.00		 9.13101 $4.00
Weight

1.0#
 0.5#
 0.9#
 0.4#
 1.8#
 0.5#
 0.2#
YEAR
 DESCRIPTION
 PART #
 WEIGHT
 PRICE
2005-06
 FRONT COIL SPRING ISOLATORS - 2 - 1/2" LIFT
 8.6102
 ?
 $ ?
1995 1/2 - 00
 FRONT COIL SPRING ISOLATORS - OEM HEIGHT
 9.6104
 0.6#
 $13.00
1995 1/2 - 00 FRONT COIL SPRING ISOLATORS - 2 - 1/2" LIFT 8.6101
$ ?
79 - 85 FRONT AXLE TORQUE ARM BUSHING SET
4 - BUSHINGS & 2 SLEEVES 		8.7101 1.0#
 $17.00
FOOTNOTES
(2) Must reuse existing outer metal shells.  Neither Energy Suspension or Prothane make control arm bushings with the outer metal shells, for Toyota vehicles.  Do you want to learn how to remove the old rubber bushings from the control arms?   See this page:  SUSPENSION tips & suggestion page
 (7) Uppers only
(8) Lowers only
 (57) Must reuse all metal part

 Contrary to the mis-information on several Toyota Tacoma web sites, you do not have to drill out the center position sleeve, so the bolt will go through the sleeve.   Energy Suspension sets include another sleeve in the 8.10101 set, to address a problem with different bolts that were used randomly by Toyota.  The 8.10101 has two different sleeves for the center position.  If the 15.10.395.39 = 0.875" O.D x 0.531" I.D x 1.270" Long sleeve will not fit over your center bolt, then use sleeve 15.10.508.39 = 0.875" O.D x 0.688" I.D. x 1.270 Long sleeve.
Energy Suspension says that their 8.10101 fits 95-1/2 to 2000 Toyota Tacoma.  They do not say it will fit newer trucks, the 4 Runner or Land Cruiser, as they have not looked at any of these vehicles to see if the 8.10101 will fit.  E.S. is always very conservative about application recommendations.
We (Suspension Restoration Parts Co.) have received feedback from customers who have successfully installed the 8.10101 on Tacoma trucks and 4 Runners up to 2004.
The new 8.10103 rack and pinion bushing sets are now available for the 2001-04 Toyota 4 x 4 Pick up.  The 8.10103 will not properly fit the 2 wd drive trucks.

HYPER-FLEX SYSTEM KITS

YEAR
 MAKE & MODEL
 DESCRIPTION
 PART #
 WEIGHT
 PRICE
2001-04
 4 WD PICK UP (EXCEPT T-100 & Tundra) Front control arm bushings You must re-use all metal parts. 
This includes the outer metal shells.  Do not remove with an air chisel,
front coil spring isolators, front sway bar bushings, front rack & pinion bushings, body mounts, rear spring & shackle bushings, tie rod end boots.		 8.18107
$175.00
95-1/2 to 2000
 4 WD PICK UP (EXCEPT T-100 & Tundra)
 Front control arm bushings You must re-use all metal parts. 
This includes the outer metal shells.  Do not remove with an air chisel, front coil spring isolators, front sway bar bushings, front rack & pinion bushings, body mounts, rear spring & shackle bushings, tie rod end boots.
 8.18104
 12.1#
 $177.00


YEAR MAKE & MODEL PART # WEIGHT
 PRICE
89-94 Toyota Standard Cab Pickup 4 WD 8.18101 11.7#
 $168.00
Includes front control arm bushings You must re-use all metal parts. 
This includes the outer metal shells.  Do not remove with an air chisel, rear spring & shackle bushings,
front sway bar bushings,tie-rod end boots and body mounts


YEAR MAKE & MODEL PART # WEIGHT
 PRICE
79-85 Toyota Standard Cab Pickup 4 WD 8.18102 7.7#
 $114.00
Includes front & rear spring & shackle bushings, front sway bar bushings,
torque arm bushings,body mounts, tie-rod end boots.


YEAR MAKE & MODEL PART # WEIGHT
 PRICE
90-95 Toyota 4 Runner 2 WD & 4 WD 8.18103 8.8#
 $154.00
Includes front & rear control arm bushings You must re-use all metal parts. 
This includes the outer metal shells.  Do not remove with an air chisel, track arm bushings,
front & rear sway bar bushings,tie-rod end boots.

T-100
YEAR
FRONT END CONTROL
ARM BUSHING SET
COMPLETE BODY
(CAB) MOUNT SET
93-98
8.3108 (57)
$45.00
Uppers only. 
 You must re-use all metal parts. 
This includes the outer metal shells.  Do not remove with an air chisel.
8.4105
$106.00
WEIGHT
 1.6#
 3.9#

Tundra Pickup

YEAR
 FRONT SWAY BAR
FRAME BUSHING SET
2000-04
 Prothane brand only
18-1117  23 mm
18-1118  24 mm
$14.00


4 RUNNER ( 2 WD & 4 WD)
YEAR FRONT END CONTROL ARM BUSHING
SET
 You must re-use all metal parts. 
This includes the outer metal shells.  Do not remove with an air chisel.
 REAR CONTROL ARM BUSHING
SET		 FRONT LEAF SPRING BUSHINGS
SET		 REAR LEAF SPRING BUSHING
SET		 COMPLETE BODY (CAB) MOUNT
SET		 FRONT SWAY BAR BUSHING SET (PAIR)
The sway bar sets do not include the metal brackets.
Please measure the diameter of the sway bar before ordering.
TIE-ROD BOOTS (PAIR)
96-97
n/a
n/a.  Really!!
It is not available
n/a
n/a
n/a
8.5118 (27 mm)
$15.00
n/a
Weight




0.8#
 0.2#
90 - 95 8.3108 
 You must re-use
all metal parts. 
This includes the outer metal shells.  Do not remove with an air chisel.
$49.00 		8.3107
$89.00 		n/a n/a n/a 8.5114 (24mm)
$20.00		 9.13101
$4.00
Weight
 1.6#
 5.3#


0.5#
 0.2#
89 8.3108 
 You must re-use
all metal parts. 
This includes the outer metal shells.  Do not remove with an air chisel.
$49.00		 n/a n/a 8.2108
$41.00 		n/a 8.5106 (24mm)
$25.00		 9.13101
$4.00
Weight
 1.6#

1.9#
1.6#
 0.2#
86 - 88 8.3104
Uppers only. 
 You must re-use
all metal parts. 
This includes the outer metal shells.  Do not remove with an air chisel.
$33.00
8.3105
  Lowers only. 
 You must re-use
all metal parts. 
This includes the outer metal shells.  Do not remove with an air chisel.
$25.00		 n/a n/a 8.2103
$23.00 		8.4102
$77.00 		8.5101 (19mm)
$15.00
 8.5102 (23mm)
$15.00		 9.13101
$4.00
Weight
 1.0# / 0.7#

1.4#
 4.4#
 0.5#
 0.2#
84 - 85 n/a n/a 8.2102
$20.00 		8.2103
$23.00 		8.4102
$77.00 		8.5101 (19mm)
$15.00
 8.5102 (23mm)
$15.00		 9.13101
$4.00
Weight

1.0#
 1.4#
 4.4#
 0.5#
 0.2#
YEAR
 DESCRIPTION
 PART #
 WEIGHT
 PRICE
2003-06
 FRONT 2.00" LIFT COIL SPRING ISOLATOR SET
8.6102
$ ?
90 - 95 Rear Control Arm Bushing Set, Coil Spring
4 Link System - Includes Track Arm Bushings
 You must re-use all metal parts. 
This includes the outer metal shells.  Do not remove with an air chisel.
 8.3107 5.3#
 $89.00
90 - 95 Rear Sway Bar Bushing - 18mm (w/endlinks)
The sway bar sets do not include the metal brackets.
 8.5115 0.9#
 $20.00
90 - 95 Rear Track Arm Bushing Only 8.7104 0.7#
 $17.00
84 - 85 Front Frame Shackle Bushing Set (4 - Bushings)(2039) 8.2104 0.5#
 $9.00
84 - 85 Rear Frame Shackle Bushing Set (4 Bushings) 8.2109 0.4#
 $9.00
84 - 85 Front Axle torque Arm Bushing Set
4 Bushings & 2 Sleeves 		8.7101 1.0#
 $17.00

FOOTNOTES
 (7) Uppers only
(8) Lowers only
 (57) Must reuse all metal part (do you want to learn how to remove the old rubber bushings from the control arms?
See this page:  SUSPENSION tips & suggestion page

  RAV 4

YEAR
FRONT END CONTROL ARM BUSHING SET
 You must re-use all metal parts. 
This includes the outer metal shells.  Do not remove with an air chisel.
REAR END CONTROL ARM BUSHING SET
FRONT SWAY BAR BUSHING SET
Please measure the diameter of the sway bar before ordering.
REAR AXLE BUMP STOP
REAR COIL SPRING ISOLATOR
BALL JOINT BOOTS SET
96-98
8.3113
$34.00
You must re-use
all metal parts. 
This includes the outer metal shells.  Do not remove with an air chisel.
8.3114
$34.00
You must re-use
all metal parts. 
This includes the outer metal shells.  Do not remove with an air chisel.
9.5129(25MM)
$17.00
9.9135
$21.00
9.6101
$19.00
9.13101
$4.00
Weight
 2.1#
 1.8#
 0.7#
 1.0#
 0.7#
 0.2#

FJ 40 & FJ60 LANDCRUISER

YEAR FRONT LEAF SPRING
BUSHING SET		 REAR LEAF SPRING
BUSHING SET		 Body Mount
Set 		TIE ROD BOOT
(PAIR)
81 - 89 8.2106
$26.00 		8.2106
$26.00 		n/a 9.13101
$4.00
Weight
 1.4#
 1.4#
0.2#
Jan. 79-80
8.2105
$20.00
8.2105
$20.00
n/a
9.13101
$4.00
Weight
 0.8#
 0.8#
0.2#
64 - Dec.78 8.2105
$20.00 		8.2105
$20.00 		8.4104, includes hardware.
$106.00 		9.13101
$4.00
Weight
 0.8#
 0.8#
 3.6#
 0.2#
58-63
n/a
n/a
 8.4104, includes hardware.
$106.00
9.13101
$4.00
Weight

3.6#
 0.2#
64-78
 Landcruiser
 Hyper-flex master set
8.18105
 Includes: Front & rear spring & shackle bushings,
body mounts & hardware, tie rod end boots.
 $127.00
Weight
5.6#

FOOTNOTES
(7) Uppers only
(8) Lowers only
(57) Must reuse all metal parts.   (do you want to learn how to remove the old rubber bushings from the control arms?
See this page:  SUSPENSION tips & suggestion page

SUSPENSION tips & suggestion page

WWW.SUSPENSION.COM
USE WITH THOSE POPULAR LIFT JACKS THAT ARE SO COMMONLY USED FOR OFF-ROADING "in a jam & stuck" SITUATIONS!
No more embarrassing rattling parts on your ultimate off-road ride. The perfect solution to a persistent problem!
 		www.suspension.com
New! Jack Strap- ( jack holder )
Support your sagging jack handle and get it back up where it belongs.
Designed specifically to fit high-lift style off-road type jacks the Jack Strap secures the loose and noisy jack handle with indestructible HYPER-FLEX™ polyurethane. Unique "thru-hole" design allows a secure and flush fit mounting on most vehicle bumpers, beds and rails. It stays on the jack all the time because the design allows the handle to complete its ratcheting cycle. Other designs do not- and ha