kbr18-24 | Rear Sway Bar Bushings - 24mm | Forester 1997-2007

  • kbr18-24 Rear Sway Bar Brace Brackets and Bushings - 24mm (0.94 inch)
  • kbr18-24 Rear Sway Bar Brace Brackets and Bushings - 24mm (0.94 inch)
  • kbr18-24 Rear Sway Bar Brace Brackets and Bushings - 24mm (0.94 inch)

Rear Sway Bar Brace Brackets and Bushings - 24mm (0.94 inch)

Manufacturer: Whiteline
Part Number: kbr18-24
Price: $139.54

check_box Free Shipping!check_box In Stock check_box Ships Immediately


Suggested part for kbr18-24: dll124-rear
dll124-rear Rear Sway Bar Lateral Locks - 23-24mm
DST Silver Color - Limited Lifetime Warranty

Suggested part for kbr18-24: kll124
kll124 Sway Bar Lateral Locks - 23-24mm
Whiteline Gold Color Plated - 3 Year Warranty

Suggested part for kbr18-24: whiteline-lubricant
whiteline-lubricant EZE Grease Polyurethane Bushing Lubricant and Prelube - 3 Pack
Whiteline provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.

  • WHITELINE bushing kits with part numbers from W00001 to WZZZZZ and KSK000 to KSKZZZ (Bushing Kits) are covered for their lifetime.

    WHITELINE performance products include sway bar/ anti-roll-kits (excluding installation components) and bracing and alignment kits with part numbers from BAF000 to BZZZZZ, KCA000 to KCAZZZ, KSB000 to KSBZZZ, KLC000 to KLCZZZ and KDT000 to KDTZZZ (Performance Products) are covered for 3 years from the date of original installation.
FitmentRear Sway Bar Brace Brackets and Bushings - 24mm (0.94 inch) kbr18-24 fits these vehicles:
Details

kbr18-24 | Rear Sway Bar Bushings - 24mm | Forester 1997-2007

Only Fits 24mm Bar Heavy Duty

Whiteline Sway Bar Bushings

Intended to hold your sway bar in place, sway bar bushings play an important role in your suspension. Whereas OE bushings are made of a soft rubber, Whiteline Sway Bar bushings are made of synthetic elastomer, a much more durable material. Whiteline's elastomer does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long-lasting part on your sway bar with Whiteline's sway bar bushings. Synthetic elastomer sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.

Whiteline Sway Bar Bushing Bag
Whiteline Sway Bar Bushing Faulty Rubber

Faulty Rubber

A sway bar's function is to maintain the maximum amount of road contact while driving. The sway bar is held tightly to the frame of the vehicle via sway bar bushings. Original Equipment rubber bushings, as mentioned previously, can warp and/or crack, losing their grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could (not) keep on a sway bar.

Whiteline kbr18-24

Product Reviews for kbr18-24 | Rear Sway Bar Bushings - 24mm | Forester 1997-2007

5 Star (1)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

Whiteline kbr18-24

5 out of 5 based on 1 user reviews. Write a Review

J
verified_user

starstarstarstarstar" Review 1 Year Later "

Great improvement over the very disappointing Cobb tubular unit that snapped in use. I am using the STi lateral arms to replace the stock units that broke at the end link tabs in place of your supplemental hardware. The remaining problem lies with Subarus under engineering the overall body structure--the forward passenger side mount bolt tore the blind nut from the sheet metal, so I have had to weld your mount to the body. No going back now. I would suggest you include car-specific torque settings in your instructions, plus bushing re-lubrication frequency, and possibly zirc fittings on the mounts.

verified_user Verified Buyer - - . Whiteline kbr18-24 - 5 out of 5