Front Strut Tower Brace Bar - Mazda Miata - ksb602

  • ksb602 Front Strut Tower Brace
  • ksb602 Front Strut Tower Brace

Front Strut Tower Brace

Manufacturer: Whiteline
Part Number: ksb602
Price: $130.22

check_box Free Shipping!check_box In Stock check_box Ships Immediately


  • WHITELINE bushing kits with part numbers from W00001 to WZZZZZ and KSK000 to KSKZZZ (Bushing Kits) are covered for their lifetime.

    WHITELINE performance products include sway bar/ anti-roll-kits (excluding installation components) and bracing and alignment kits with part numbers from BAF000 to BZZZZZ, KCA000 to KCAZZZ, KSB000 to KSBZZZ, KLC000 to KLCZZZ and KDT000 to KDTZZZ (Performance Products) are covered for 3 years from the date of original installation.
FitmentFront Strut Tower Brace ksb602 fits these vehicles:
Details

Front Strut Tower Brace Bar - Mazda Miata - ksb602

alloy adj

Whiteline Strut Tower Brace

Gain the edge on the track you need with Whiteline's Strut Tower Braces. These alloy braces help to maintain alignment angles and spring rates by reducing chassis flex. Whiteline's brace helps every part in the suspension to function properly, and you can feel the difference through improved turn-in, sharper steering response along with increased steering feedback. Whiteline strut tower braces not only increase your performance, but they also feature premium polished alloy materials and powder coated end brackets to make your car look as good as it performs.

Whiteline Strut Tower Brace
Whiteline ksb602

Product Reviews for Front Strut Tower Brace Bar - Mazda Miata - ksb602

5 Star (1)
33%
4 Star (2)
67%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar_border

Whiteline ksb602

4 out of 5 based on 3 user reviews. Write a Review

W
verified_user

starstarstarstarstar" Review 2 Years Later "

Tower brace has worked perfectly along with looking great. Thanks for the opportunity to pass along my thoughts.\nWayne

verified_user Verified Buyer - - . Whiteline ksb602 - 5 out of 5
G
verified_user

starstarstarstarstar_border" Good Quility - but "

I just installed the strut tower brace in my 1999 Miata yesterday. One of the brackets was attached backwards and had to be switched. There were a number of finger prints on the polished surface which buffed out easily. I would buy this product again and it was easy to install - a 10 minute job. The car is much stiffer with the bar in place.

verified_user Verified Buyer - - . Whiteline ksb602 - 4 out of 5
L
verified_user

starstarstarstarstar_border" Good product "

Easy to install and of above average quality/design, adequate for "spirited" street driving and occasional track day

verified_user Verified Buyer - - . Whiteline ksb602 - 4 out of 5