Front Control Arm Bushings - Subaru Legacy - w51709a

  • w51709a 360image 1
  • w51709a Front Lower Control Arm Bushings - Inner Front Position
  • w51709a Front Lower Control Arm Bushings - Inner Front Position
  • w51709a Front Lower Control Arm Bushings - Inner Front Position
  • w51709a Front Lower Control Arm Bushings - Inner Front Position
  • w51709a Front Lower Control Arm Bushings - Inner Front Position
  • w51709a 360image large 1

Front Lower Control Arm Bushings - Inner Front Position

Manufacturer: Whiteline
Part Number: w51709a
Price: $58.88

check_box In Stock check_box Ships Immediately


  • 4 of 5474 - Front Lower Control Arm Bushing - Inner Front Position
  • 2 of Metal Sleeves
  • 1 of Grease
  • WHITELINE bushing kits with part numbers from W00001 to WZZZZZ and KSK000 to KSKZZZ (Bushing Kits) are covered for their lifetime.

    WHITELINE performance products include sway bar/ anti-roll-kits (excluding installation components) and bracing and alignment kits with part numbers from BAF000 to BZZZZZ, KCA000 to KCAZZZ, KSB000 to KSBZZZ, KLC000 to KLCZZZ and KDT000 to KDTZZZ (Performance Products) are covered for 3 years from the date of original installation.

question_answer Ask us a Question

FitmentFront Lower Control Arm Bushings - Inner Front Position w51709a fits these vehicles:
Details

Front Control Arm Bushings - Subaru Legacy - w51709a

Bushing is 55mm in length.

Whiteline Control Arm Bushings

A control arm bushing plays a vital role in a suspension. Replace those faulty O.E. rubber bushings with Whiteline's synthetic elastomer control arm bushings. These elastomer bushings provide the longevity and performance needed to maximize a suspension's efficiency.

Whiteline's synthetic elastomer is a firmer bushing than the O.E. Not only does this increase the longevity of the bushing, but it gives the suspension a boost in handling performance. With a firmer bushing, there will be a slight increase in NVH (noise, vibration, and harshness), but most drivers prefer the boost in performance in spite of that.

Whiteline Control Arm Bushings Bag
Worn Rubber Bushing

The Faulty O.E.

As your suspension travels, a rubber control arm bushing is repeatedly stretching and flexing. After a while, the center sleeve begins to sag and your suspension alignment is throw out of whack. The sagging will go on until the rubber fails completely.

Whiteline w51709a

Product Reviews for Front Control Arm Bushings - Subaru Legacy - w51709a

5 Star (4)
100%
4 Star (0)
0%
3 Star (0)
0%
2 Star (0)
0%
1 Star (0)
0%
starstarstarstarstar

Whiteline w51709a

5 out of 5 based on 4 user reviews. Write a Review

K
verified_user

starstarstarstarstar" Review 2 Years Later "

These bushings have held up well after 2 years. I drive this vehicle every day on mountain roads, long highway commutes, rough dirt/gravel, and occasionally towing. They are firm and do not squeak. I would recommend them to anyone looking for an upgrade but willing to compromise some road noise (stock rubber bushings are quieter).

verified_user Verified Buyer - - . Whiteline w51709a - 5 out of 5
M
verified_user

starstarstarstarstar" Review 2 Years Later "

So far so good. I live in the mountians so I off road everyday. First couple of months was very noisy but now they are fine.

verified_user Verified Buyer - - . Whiteline w51709a - 5 out of 5
D
verified_user

starstarstarstarstar" Worth the money to buy and the effort to install "

No fault of Whiteline but these were a tough install. Due to the tight space around them I couldnt use my 12 ton press to remove the old ones. Reassembly went way easier. I also replaced the rear bushing which was a snap due to the fact that I could use my press to disassemble and reinstall the new one. The result was a much more rigid front end which really improved the handling of my old Subaru. I am thinking of doing all the rear suspension bushings now.

verified_user Verified Buyer - - . Whiteline w51709a - 5 out of 5
D
verified_user

starstarstarstarstar" Worth the money to buy and the effort to install "

No fault of Whiteline but these were a tough install. Due to the tight space around them I couldnt use my 12 ton press to remove the old ones. Reassembly went way easier. I also replaced the rear bushing which was a snap due to the fact that I could use my press to disassemble and reinstall the new one. The result was a much more rigid front end which really improved the handling of my old Subaru. I am thinking of doing all the rear suspension bushings now.

verified_user Verified Buyer - - . Whiteline w51709a - 5 out of 5
Fitment for w51709a
SUBARU FORESTER SF Including TURBO (8/1997-8/2002)
SUBARU FORESTER SG Including TURBO (9/2002-8/2008)
SUBARU IMPREZA GC SEDAN, GF WAGON Does Not Include WRX AND STI (4/1993-9/2000)
SUBARU IMPREZA GD SEDAN, GG WAGON MY01-02 Does Not Include WRX AND STI (10/2000-9/2002)
SUBARU IMPREZA WRX GC SEDAN, GF WAGON (4/1993-9/2000)
SUBARU IMPREZA WRX GD SEDAN MY01-02 (10/2000-9/2002)
SUBARU IMPREZA WRX GG WAGON MY01-02 (10/2000-9/2002)
SUBARU IMPREZA WRX STI GC SEDAN, GF WAGON (4/1993-9/2000)
SUBARU IMPREZA WRX STI GD SEDAN, GG WAGON MY01-02 (10/2000-9/2002)
SUBARU LEGACY BC, BF Including RS TURBO (10/1989-5/1994)
SUBARU LEGACY BD, BG (6/1994-8/1998)
SUBARU LEGACY BE, BH Including TURBO (9/1998-8/2003)
SUBARU LIBERTY BD, BG (6/1994-8/1998)
SUBARU LIBERTY BE, BH Including TURBO (9/1998-8/2003)
SUBARU OUTBACK BG (7/1996-8/1998)
SUBARU OUTBACK BH (9/1998-8/2003)

question_answer Customer Questions and Answers


Question:
Does Whiteline part number, W51709A, fit a 1997 Subaru Impreza?
Answer:
Yes, Whiteline part number, W51709A, will fit a 1997 Subaru Impreza.