unarchive In The Box of w82047e keyboard_arrow_down
- 2 of 8166E-A
- 2 of 8166E-B
- 2 of Crush Tubes
- 2 of Large Flat Washer
- 2 of Small Flat Washer
- 2 of Replacement Plate
- 2 of Grease
add_shopping_cart Suggested Parts 1keyboard_arrow_down
lock Warranty Information keyboard_arrow_down
- WHITELINE bushing kits with part numbers from W00001 to WZZZZZ and KSK000 to KSKZZZ (Bushing Kits) are covered for their lifetime.
WHITELINE performance products include sway bar/ anti-roll-kits (excluding installation components) and bracing and alignment kits with part numbers from BAF000 to BZZZZZ, KCA000 to KCAZZZ, KSB000 to KSBZZZ, KLC000 to KLCZZZ and KDT000 to KDTZZZ (Performance Products) are covered for 3 years from the date of original installation.
shuffle Cross References 1keyboard_arrow_down
Whiteline Performance Front Radius Rod Bushings - at Frame
There are many things we take for granted when we go to drive our cars. That the lock will release when we insert our key in the door, we take it for granted that the car will start when we engage the ignition, and that is will stop when we push on the brakes. For that last one, there are different reasons why the brakes may not work as well as we would like them to. In fact, a lot of times, it has nothing to do with the brakes. If your suspension parts are worn, this can negatively affect your GTO or Holden's braking ability. Radius rod bushings, in particular, tend to absorb most of the loads under braking, resulting in severe wear and reduced braking efficiency over time. As this is a commonly failed part, you need to replace it with Whiteline's Front Radius Rod Bushings, which comes with a Lifetime warranty to make sure you never have to buy this part again.
What's so special?
A critical service item for any Pontiac GTO 2002-2006 and Holden Commodore 1997-2006 is the front radius rod bushings at the frame. Whiteline has engineered part W82047E, which is a synthetic elastomer that is intended to replace the failed factory fluid filled bushings and eliminate excess play and deflection when compared to the factory bushing. W82047E has a bushing durometer of 70, which allows the bushings to balance performance and ride quality. The installation of this bushings kit results will greatly reduce front end dive under heavy braking and eliminates shudder and wheel movements associated with a failed bushing. Whiteline's one-of-a-kind synthetic elastomer technology helps increase performance while minimizing noise and vibrations. Installation requires the use of basic shop tools such as a press and lift. We also recommend having the alignment inspected/adjusted after installation. This install requires removal of the strut rod, and any time you do that, it is recommended that you have the vehicle aligned.
Product Reviews for Front Strut Arm Bushings - Pontiac GTO - w82047e
- 5 Star (3)
- 4 Star (0)
- 3 Star (0)
- 2 Star (0)
- 1 Star (0)
starstarstarstarstar" Huge improvement over stock "
I did not even realize how bad my stock RR bushings were until I changed them out. These were such an improvement that they actually allowed me to detect a tie rod going out in my 04 GTO. Definitely, a must have for this vehicle and very reasonably priced. Been installed for a month now and no issues, direct fit, easy install. Would buy againverified_user Verified Buyer - Ian Keith - . Whiteline w82047e - 5 out of 5
starstarstarstarstar" Review 2 Years Later "
Still like new great product.verified_user Verified Buyer - ANTWON GREENE - . Whiteline w82047e - 5 out of 5
starstarstarstarstar" Excellent "
The parts came as described and installed with minimum effort. The car no longer has wheel movement front to back and the alignment went without a hitch!verified_user Verified Buyer - Philip Shapiro - . Whiteline w82047e - 5 out of 5