Suspension Restoration Parts Energy Suspension

Yes, we have all these in stock!
Go back to the index page

BALL JOINT &
TIE ROD END BOOTS

Available in Black(G) & Red(R)
tie rod end boot
(A) Seals tight at tapered shaft
(B) Sharp edge helps seal-in lubricant
(C) Inside radius of boot works with rod socket as a wiper
(D) Extra sealing lips
(E) Barrel shaped for a better fit

Ball Joint Boot Applications we know will fit. 
If your car or truck is not here, then look at the chart below this one,
and try to figure out if one of our boots will fit your application.

YEAR
MAKE & MODEL
QUANTITY & INDIVIDUAL
PART NUMBER
OF THE BOOT ONLY
THAT IS IN EACH SET

BALL JOINT BOOT
SET #
PRICE OF
THE SET

90 - 01
Acura Integra
2) 13001
2) 13003
16.13101
$8.00
77 - 94
Cadillac Deville
2) 13001
2) 13007
9.13128
$8.00
55 - 57
Chevrolet Bel-Air
2) 13009
2) 13007
1) 9.13130
1) 9.13119
$8.00
64 - 72
Chevelle, Malibu, Cutlass
2) 13009
2) 13010
9.13125
$8.00
67 -69
Camaro & Firbird
2) 13009
2) 13010

9.13125
$8.00
70 - 81
Camaro & Firebird
2) 13001
2) 13007

9.13128
$8.00
68 - 74
Nova
2) 13009
2) 13010

9.13125
$8.00
63 - 82
Corvette
2) 13009
2) 13010

9.13125
$8.00
84 - 96
Corvette
2) 13014
2) 13010
9.13127 $8.00
88 - 98
GM 2 wd truck
2) 13014
2) 13013
9.13126
$8.00
88 - 97
GM

1/2 TON K-5 BLAZER(thru '92),
TAHOE, YUKON AND SUBURBAN(1/2 & 3/4 TON) 2WD only

2) 13014
2) 13013

9.13126
$8.00
82 - 94
Chevy S-10 2wd
Blazer & PU
2) 13001
2) 13007

9.13128
$8.00
87 - 89
Chevy Astro Van
2) 13001
2) 13007

9.13128
$8.00
94 - 06
Hummer H1
2) 13025Hummer H1 dust boot set
2) 13026
9.13136
$28.00
73 - 87
Buick Regal
2) 13001
2) 13007

9.13128
$8.00
64 - 72
Buick Regal
2) 13009
2) 13010

9.13125
$8.00
85 - 96
Buick fullsize
2) 13001
2) 13007

9.13128
$8.00
61 - 65
Buick Rivera
2) 13009
2) 13014

9.13132
$8.00
79 - 85
Buick Rivera
2) 13001
2) 13007

9.13128
$8.00
75 - 79
Buick Apollo, Skylark
2) 13001
2) 13007

9.13128
$8.00
75 - 96
Chevy Caprice, Impala
2) 13001
2) 13007

9.13128
$8.00
73 - 88
Chevy El Camino,
Chevelle, Monte Carlo
2) 13001
2) 13007

9.13128
$8.00
75 - 79
Chevy Nova
2) 13001
2) 13007

9-13128
$8.00
73 - 88
Oldsmobile Cutlass
2) 13001
2) 13007

9.13128
$8.00
79 - 97
Mustang
2) 13009
9.13130
$4.00
74 - 78
Mustang II
The label will say 'Chrysler ball joint boot set', but don't worry, they fit your Mustang II.
2) 13009
2) 13024

5.13102
$8.00
82 - 92 Camaro 2) 13009
9-13130
$4.00
62-76
Mopar A- body
2) 13009
2) 13024
5.13102
$8.00
65-79
Mopar B-body
2) 13009
2) 13024

5.13102
$8.00
70-74
Mopar E-body
2) 13009
2) 13024

5.13102
$8.00
90-97
Honda Accord
2) 13003
2) 13005
16.13102
$8.00
84-87
Honda Civic
2) 13001
9-13101
$4.00
88-00
Honda Civic
2) 13001
2) 13003

16-13101
$8.00
90-97
Mazda Miata
2) 13003
2) 13005 ?
We are not sure about this one
16.13102
$8.00
70-78
Nissan 240Z, 260Z & 280Z
2) 13007
9.13119
$4.00
79-83
Nissan 280 ZX
2) 13007
9.13119
$4.00
65-89
Porsche 911
2) 13005
9.13105
$4.00
Factory 5
Kit car
Pole Position up & lower control arms,
with Mopar screw in ball joints
2) 13009
2) 13024

5.13102
$8.00
Product weight
.5#


BALL JOINT & TIE ROD END BOOT DIMENSIONS
We offer you the dimensions of ALL the ball joint boots that Energy Suspension makes,
so you can hopefully find a boot that will fit ball joints or tie rod ends that we do not have listed above.

If you do see the size boot that you need,
we cannot help, sorry.

These boots are not expected to fit idler arms or pitman arms.


PART NUMBER
FOR A
SINGLE BOOT ONLY

13001

$2.00
EACH
13003

$2.00
EACH

13005

$2.00
EACH

13007

$2.00
EACH

13009

$2.00
EACH

13010

$2.00
EACH

13013

$2.00
EACH

13014

$2.00
EACH

13015

$4.00
EACH

13022

$4.00
EACH

13024

$2.00
EACH

13025
13026

DIMENSION A(stud hole)
19/32" or
.590"
or 15mm

31/64" or
.472
or 12mm

9/16"
or
.550"
or
14mm

21/32" or
.650"
or 16.6mm

0.735"
or 18.66 mm
0.580"
or
14.73 mm
0.900"
or
22.86 mm
0.640"
or
16.26 mm
1-3/16"
or
1.187"
or
30 mm

0.840"
or
21.35mm

outer clamp groove
1.300"
or
33.02mm

0.650"
or
16.51 mm
0.740"
or 18.80 mm
0.840"
or
21.34 mm

DIMENSION B(base)
1-3/8"
or 1.375" or 35mm

1-13/64" or 1.200" or 30.5mm

1-7/16"
or 1.437" or 36.5mm

1-5/8"
or 1.625" or 41.3mm

1.640"
or
41.66 mm
1.430"
or
36.33 mm
2.140"
or
54.36 mm
1.630"
or
41.40 mm
1-7/8"
or
1.875"
or
47 mm
1.715"
or
43.55 mm
1.635"
or
41.53 mm
1.800"
or
45.72 mm
2.020"
or
51.31 mm

OVERALL HEIGHT(approx.)
This is important because you want the spindle to hold the boot down tight, over the ball joint.
0.966"
or
24.54 mm
0.938"
or
53.83 mm
0.918"
or
23.32 mm
0.953"
or
24.21 mm
1.100"
or
27.94 mm
1.325"
or
33.65 mm
1.075"
or
27.31 mm
1.146"
or
29.11 mm
1.045"
or
26.54 mm
2.190"
or
73.66 mm
1.390"
or
35.31 mm
1.675" or 42.55 mm
1.580" or
40.13 mm

PART NUMBER FOR ONE PAIR(SET)
OF BOOTS

9.13101
$4.00 PR.
9.13103
$4.00 PR.
9.13105
$4.00 PR.
9.13119
$4.00 PR.
9.13130
$4.00 PR.
N/A
N/A
N/A
90.13127
$8.00 PR.
Used with  heavy truck applications
5.13101
$8.00 PR.
Mopar torsion arm boot.
N/A
sold in set number 9.13136 only.
$28.00
sold in set number 9.13136 only.
$28.00

BALL JOINT DUST BOOT SET NUMBERS CONTENTSTIE ROD END DUST BOOT SET NUMBERS
CONTENTS
TORSION  BAR DUST BOOT SET NUMBER
CONTENTS
5.13102
2) 13009
2) 13024

9.13101
2) 13001
5.13101
2) 13022
9.13125
2) 13009
2) 13010

9.13103
2) 13003
9.13126
2) 13014
2) 13013

9.13105
2) 13005
9.13127
2) 13014
2) 13010

9.13119
2) 13007
9.13128
2) 13001
2) 13007



9.13130
2) 13009
9.13131
2) 13014
9.13132
2) 13009
2) 13014

16.13101
2) 13001
2) 13003

16.13102
2) 13003
2) 13005

13009 may work as a dust boot for GM A-Body Idler arm.
Some Heidts front ends use 1963 T-bird lower & 1976 Chevette Upper ball joints.

It is possible to modify these boots for custom applications if you are extremely careful.
You can easily trim or cut these boots with an exacto knife or razor blade,  You must make one continuous cut. 
If you slip and knick the boot you run the chance that the boot will tear at the point where you nicked it.
Be careful.  You might want to purchase extras in case of mistakes.


Above is a photo of the different styles of tie rod end boots.
Tie rod end boots are only available in the colors black(G) or red(R).
We only stock the round style, the octagon is a special factory order.
SUSPENSION tips & suggestion page

Guide to understanding Energy Suspension part numbers.
Energy Suspension assigns a part number to each and every part they make.  
There can be several of these part numbers that will make up a 'set' part number.
In the case of tie rod end and ball joint dust cover boots, each part starts with 130xx.
The part number of a single dust boot is molded into the boot, to identify the boot.
A set
starts with 9.131xx and will contain 2 or 4 boots.

Yes, we sell boots in bulk.  You can purchase 100 to 1000 or more.  Just call us for bulk prices

PRODUCT WEIGHT
is now included in the charts above.  
1.2# means that the part number listed weighs 1 pound & 2 tenths of a pound.
We are giving this measurement, because this is how Energy Suspension has chosen to give us the weight of each part number.
1 Pound(lb.or #) = 16 ounces(oz.) divided by 10 = 1.6 oz.  
This is not the shipping weight, just the weight of the part.  
To estimate your shipping cost, you should round up to the next pound and usually add about a pound for shipping weight.  
When we ship via UPS(United Parcel Service) we have to round up to the next pound.
  UPS does not accept ounce weight, or increments of tenths.  
We will always weigh your order on an electronic scale and charge you for the exact weight, rounded up to the next pound.  
For USPS(United States Postal Service) shipping we also round up to the next pound.

ABOUT THE COST OF SHIPPING VIA
UPS
(United Parcel Service)
AS OF MARCH 1, 2008,
We are providing you with this information, so that you can ESTIMATE your shipping cost before you place your order.
The prices in the table below represent the cost of shipping a package from our warehouse in
Modesto, California to a residential address in Maine, the furthest point from CA.
UPS will charge extra for some rural addresses.
If your address is in a zone west of the east coast zone(Maine to Florida), say in the Midwest or on the West Coast, your shipping cost will be less.
Of course Alaska & Hawaii are exceptions, call us for the rates.
When
UPS charges us less to ship to your address, we will charge you less.
If they charge us more than is on the chart below, we charge you more.
We charge you the exact cost of shipping. 
After you have placed your order:
1. We will weigh your order
2. Put the weight and your address into the
UPS shipping computer
3. Assign the level of shipping you request, Ground, 1 day, 2 day or 3 day
4. Enter the value if it is over $100.00
5. Charge you exactly what the
UPS computer says it will cost to ship your order to you.
It is NOT our goal to make money off of shipping.

The
UPS prices below are ESTIMATES. 
They do not include rural surcharges that could apply to some addresses.
For Alaska & Hawaii please call us for rates.
YOUR SHIPPING OPTIONS
PACKAGE WEIGHT
United Parcel Service
UPS
GROUND
Modesto, CA. to Maine
UPS
3 DAY AIR
Modesto, CA. to Maine
UPS
2 DAY AIR
Modesto, CA. to Maine
UPS
1 DAY AIR
Modesto, CA. to Maine
United States Postal Service
USPS PRIORITY MAIL
DELIVERY TO ANY USA
ADDRESSES ONLY.
(2 - 4 DAYS)
For over seas orders
See the USPS website: http://ircalc.usps.gov/
to calculate the cost to ship your order to your country.

United States Postal Service
USPS FLAT RATE BOX SPECIFICATIONS
AND
INSURANCE INFORMATION
1 POUND (1.0#)
10.38
18.42
22.77
49.83
$5.00
UNITED STATES POSTAL SERVICE (USPS)
Required USPS boxes for flat rate service:
USPS PRIORITY BOXES

Box #1 = 11-7/8 x 3-3/8 x 13-5/8 inches
$9.25
Box #2 = 11 x 8-1/2 x 5-1/2 inches.
$9.25
New even bigger Flat Rate Box now available
Box #3 = 12" x 12" x 5-1/5"
$13.25
Rates are for USA addresses only.
Flat rate service is available for Canada
and some other countries at an increased cost.
See this website:
http://ircalc.usps.gov/
for rates to your country.








There is not a weight limit for USPS flat rate boxes, but there is a limit as to how much we can fit into USPS flat rate boxes.

United Parcel Service(UPS) includes insurance.

USPS
does NOT include INSURANCE.
If USPS loses your package and your order is not insured,
you will have to place another order. 
We will not offer to pay for the lost part or for another shipment.

If you want to add insurance to your USPS shipment,
ask us for it
.
Here are the USPS insurance rates:

$0.01 TO $50.00 value of your order
$1.65

$50.01 TO $100.00 value of your order
$2.05


$100.01 to $200.00 value of your order.
$2.45


A note about USPS shipments.  The USPS carrier usually picks up packages at out business first thing every morning Monday - Friday (we are not open Saturday or Sunday).  This usually means that your order will not leave until the next day, so figure on 3-4 days for delivery.
2 POUNDS (2.0#)
11.25
20.60
25.69
54.87
$7.75
3 POUNDS (3.0#)
11.97
22.77
28.62
59.48
$9.25 Flat rate.  Must be able to fit into the box #1 or #2 USPS flat rate box.

$13.25 Flat rate.  Must be able to fit into the box #3 USPS flat rate box.
4 POUNDS (4.0#)
12.43
24.71
31.79
64.52
$9.25 Flat rate.  Must be able to fit into the box #1 or #2 USPS flat rate box.

$13.25 Flat rate.  Must be able to fit into the box #3 USPS flat rate box.
5 POUNDS (5.0#)
12.90
26.57
35.41
69.12
$9.25 Flat rate.  Must be able to fit into the box #1 or #2 USPS flat rate box.

$13.25 Flat rate.  Must be able to fit into the box #3 USPS flat rate box.
6 POUNDS (6.0#)
13.18
28.75
38.20
74.16
$9.25 Flat rate.  Must be able to fit into the box #1 or #2 USPS flat rate box.

$13.25 Flat rate.  Must be able to fit into the box #3 USPS flat rate box.
7 POUNDS (7.0#)
13.58
30.99
41.44
78.77
$9.25 Flat rate.  Must be able to fit into the box #1 or #2 USPS flat rate box.

$13.25 Flat rate.  Must be able to fit into the box #3 USPS flat rate box.
8 POUNDS (8.0#)
14.13
33.29
44.98
83.43
$9.25 Flat rate.  Must be able to fit into the box #1 or #2 USPS flat rate box.

$13.25 Flat rate.  Must be able to fit into the box #3 USPS flat rate box.
9 POUNDS ( 9.0#)
14.75
35.41
48.85
88.41
$9.25 Flat rate.  Must be able to fit into the box #1 or #2 USPS flat rate box.

$13.25 Flat rate.  Must be able to fit into the box #3 USPS flat rate box.
10 POUNDS (10.0#)
15.42
37.64
52.38
93.39
$9.25 Flat rate.  Must be able to fit into the box #1 or #2 USPS flat rate box.

$13.25 Flat rate.  Must be able to fit into the box #3 USPS flat rate box.

UPS INSURANCE
is included for the first $100.00 value
For orders over $100.00 please add:
$1.20 per $100.00 value
$2.50 per $100.00 value
$2.50 per $100.00 value
$2.50 per $100.00 value
INSURANCE IS NOT INCLUDED WITH USPS SHIPMENTS.
YOU MUST REQUEST INSURANCE COVERAGE.
We accept:
Visa, MasterCard, American Express or Discover credit cards.

At this time, we do not accept PayPal.
To process your order we will need:
1. Your NAME as it appears on the credit card.
2. The BILLING address of the credit card.
3. Your PHONE number
4. The CREDIT CARD number
5. The EXPIRATION date of the credit card.
6. The three(3) digit CVV2 security code on the BACK of the credit card.
7. How do you want us to ship your order?
Yes, you can give us an alternate ship to address.  But we must have the billing address to process your order.
FOR OUR INTERNATIONAL CUSTOMERS
For international orders we normally ship via the United States Postal Service(USPS).
  United Parcel Service(UPS)next day air and second day air is also available, upon request.

Every countries Customs authorities require us to declare the parts we sell to you as merchandise
We are required to send a commercial invoice that lists the value of each part ordered.
We will charge you for the value of the parts plus the cost of shipping to you.
We will not show a reduced price on the invoice or declare the parts as gifts or samples.
You are responsible for all of your countries duties and taxes.
If you want an estimate of the cost of shipping:
1. Add up the total weight of the parts you want to order(the weight is under every part number),
add 1 pound for packaging material.
2. Go to the USPS website http://ircalc.usps.gov/ and enter the country where you want the parts shipped.
3. Enter the weight of your order.
4. Check out the different shipping options, and choose the one that is best for you.

Call us with your order, or we would prefer that you EMAIL your order to sales@suspension.com.
This way we will know the correct spelling of your name and address.


We only stock these bushings in the color black.
Yes, we have all of these bushings in stock, for immediate shipment.
But, remember, if you wanted it today, you should have ordered it from SUSPENSION yesterday.

California residents please add 7.375% sales tax.
We normally ship via U.P.S. within the U.S.A.
U.S.P.S. Priority Mail is available upon request

Suspension Restoration Parts Co.
319-C Motor City Ct.
Modesto, California 95356 USA
East Coast Hours: 11:00 A.M. to 8:00 P.M.(EST)  Monday - Friday
West Coast Hours: 8:00 a.m. to 5:00 p.m (PST)
Monday - Friday.

(209) 578-5101 Tech questions & order line. 
8:00 AM to 5:00 PM(PST), M-F.

(800) 291-5340 Orders Only.  8:00 A.M. - 5:00 P.M.(PST) Monday - Friday.
NO tech questions answered here.

(209) 578-0562 (FAX) Anytime




Copyright © 2008 SUSPENSION RESTORATION PARTS CO. All Rights Reserved