unarchive In The Box of 11.5106 keyboard_arrow_down
- 2 - 5313 - Rear Sway Bar Bushing, 14.5mm
- 1 - 9.11103 - 6 Gram Tube of Formula 5 Prelube
add_shopping_cart Suggested Parts 4keyboard_arrow_down
If your rear sway bar bushings are worn out, chances are that your front bushings are worn out as well. Replace them both at the same time while you're already under the car for the maximum increase in handling.
DST Silver Color - Limited Lifetime Warranty
Whiteline Gold Color Plated - 3 Year Warranty
Energy Suspension provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
shuffle Cross References 1keyboard_arrow_down
Energy Suspension Sway Bar Bushings
Energy Suspension Hyperflex Sway Bar bushings are made of polyurethane, which is a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Energy Suspension's sway bar bushings. Energy Suspension's polyurethane sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.
A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.
Be sure to use Formula 5
The sway bar bushing sees a lot of action, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for 11.5106 | Rear Sway Bar Bushings - 14 mm | Mazda RX7 1979-1985
- 5 Star (1)
- 4 Star (0)
- 3 Star (0)
- 2 Star (1)
- 1 Star (0)
Energy Suspension 11.5106
starstarstarstarstar" Very good product "
Easy installation.verified_user Verified Buyer - Kyle T. Matsuoka - . Energy Suspension 11.5106 - 5 out of 5
starstarstar_borderstar_borderstar_border" OK but not correct size "
These do not fit early RX7s that have a larger 18 mm diameter rear sway bar. The bushing opening where the bar goes is only 14 mm. I wish the description of these mentioned that before I ordered them. Check the diameter of your bar before you order. Editors note: Always measure your sway bar to insure the correct bushing.verified_user Verified Buyer - Armand Scott Kafesjian - . Energy Suspension 11.5106 - 2 out of 5