Front Sway Bar Bushings - 22mm | Mazda Miata MX5 2016

  • 11.5116 360image 1
  • 11.5116 Front Sway Bar Bushings - 22mm (0.87 inch)
  • 11.5116 Front Sway Bar Bushings - 22mm (0.87 inch)
  • 11.5116 Front Sway Bar Bushings - 22mm (0.87 inch)
  • 11.5116 Front Sway Bar Bushings - 22mm (0.87 inch)
  • 11.5116 360image large 1

Front Sway Bar Bushings - 22mm (0.87 inch)

Manufacturer: Energy Suspension
Part Number: 11.5116

Color: (?)

Exclusive for DST Customers: (?)
Free Lifetime Warranty Upgrade
Price: $30.84

check_box In Stock check_box Ships Immediately

Suggested part for 11.5116: kll122
kll122 Sway Bar Lateral Locks - 21-22mm
Whiteline gold colored latter locks. Prevents lateral sway bar movement

Suggested part for 11.5116: dll122
dll122 Front Sway Bar Lateral Locks - 21-22mm
DST silver colored lateral locks. Prevents Lateral sway bar movement.

Suggested part for 11.5116: 9.11110
9.11110 Formula 5 Prelube 3 - 5 mL Tubes
Energy Suspension provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.

  • Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.

question_answer Ask us a Question

FitmentFront Sway Bar Bushings - 22mm (0.87 inch) 11.5116 fits these vehicles:

Front Sway Bar Bushings - 22mm | Mazda Miata MX5 2016

Energy Suspension Sway Bar Bushings

Energy Suspension Hyperflex Sway Bar bushings are made of polyurethane, a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Energy Suspension's sway bar bushings. Energy Suspension's polyurethane sway bar bushings provide a secure grip on the sway bar and does not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.
Energy Sway Bar Bushing
Faulty Rubber

Faulty Rubber

A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes the your sway bar to lose it's effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.

Be sure to use Formula 5

The sway bar bushing sees a lot of action, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Formula 5 Gif