unarchive In The Box of 15.5111 keyboard_arrow_down
- 2 of 05P06054 - Rear Sway Bar Bushing
add_shopping_cart Suggested Parts 2keyboard_arrow_down
DST's lateral locks prevent sway bar movement and fits OE and aftermarket bars.
3 - 5ML High Performance Grease by Energy
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
15.5111 | Rear Sway Bar Bushings - 21.7mm | VW Golf 2010-2014
21.7mm Rear Sway Bar Bushings Audi Q3 + Volkswagen Models
The rear sway bar of your Volkswagen EOS, GTI, Tiguan, or Audi Q3 helps keep your back tires on the road during a sharp turn. So if those tires let go of the pavement during a turn and send your car sliding out you might think about installing a larger rear sway bar, but the real problem might be the rubber bushings holding the bar to the frame.
Get More Grip
If a hollowed out rubber bushing is holding your rear sway bar it could shift during a turn allowing the body of your VW or Audi to roll and disrupting the connection between your rear tires. This can cause those tires to lose traction and make your car drift around a turn. On a closed track with a tuned car, this is cool, but not something you want happening on accident in your daily driver.
You can replace those bushings with more rubber, but if you're looking for a more durable option you should check out Energy Suspension's polyurethane Rear Sway Bar Bushings. Polyurethane doesn't flex or bend like rubber and will continue to provide a secure grip on the rear sway bar, keeping those rear tires on the ground long after worn rubber bushings would have let them go.
More Bang for your Buck
These 21.7mm rear sway bar bushings not only replace worn rubber bushings but it can also make the stock sway bar on your Audi or Volkswagen handle corners like an expensive aftermarket rear sway bar, all for a fraction of the price. Energy Suspension's sway bar bushings are split for an easy install and simply slip over the bar before being held firmly in place by the bracket, making this one of the easiest DIY suspension projects you can take on.
The Durable Solution
Wear is not the only circumstance that can cause those rubber bushings to fail. Heat, road grime, and auto chemicals can cause rubber to degrade to the point of falling right off of your car, while polyurethane is unaffected by these elements.
After installing these bushings you will notice a significant reduction in body roll from your Audi or Volkswagen, especially during hard turns or if your vehicle has a lot of miles. Energy Suspension's polyurethane bushings will outlast rubber everytime and DST will back them up with a lifetime warranty.
