unarchive In The Box of 3.4161 keyboard_arrow_down
- Position 1
- 2 of 04P04342 - Upper Body Mount Bushing
- 2 of 04P04343 - Lower Body Mount Bushing
- 2 of 15.10.118.39 - .750" X .625" X 1.490"; Sleeve
- 2 of 15.05.08.39 - 7/16-14 X 3"; Bolt
- 4 of 15.03.04.39 - 1-1/8" X 7/16" X .100"; Flat Washer
- 2 of 15.03.13.39 - 1-3/4" X 7/16" X 1/8"; Flat Washer
- 2 of 15.03.99.39 - 1-1/4" X 1/2" X .090"; Cap Washer
- 2 of 15.03.09.39 - 2.00" X 7/16" X1/8"; Flat Washer
- 2 of 15.07.02.40 - 7/16-14; Nylock Nut
- Position 2
- 2 of 04P04344 - Upper Body Mount Bushing
- 2 of 04P04345 - Lower Body Mount Bushing
- 2 of 15.10.548.39 - .875" X .625" X 1.625"
- 2 of 15.05.08.39 - 7/16-14 X 3"; Bolt
- 2 of 15.03.07.39 - 2-1/2" X 7/16" X 1/8"; Flat Washer
- 2 of 15.03.09.39 - 2.00" X 7/16" X1/8"; Flat Washer
- 2 of 15.03.04.39 - 1-1/8" X 7/16" X .100"; Flat Washer
- 2 of 15P0704342 - 7/16-14; Flanged Hex Nut
- Position 4
- 2 of 04P04346 - Upper Body Mount Bushing
- 2 of 04P04347 - Lower Body Mount Bushing
- 2 of 15.10.605.39 - 1.00" X .750" X 1.625"; Sleeve
- 2 of 15.05.76.39 - 7/16-14 X 2-1/4"; Bolt
- 2 of 15.03.28.39 - 2-1/2" X 3/4" X 1/8"; Flat Washer
- 2 of 15.03.09.39 - 2.00" X 7/16" X1/8"; Flat Washer
- 2 of 15.03.04.39 - 1-1/8" X 7/16" X .100"; Flat Washer
- Position 5 & 6
- 4 of 04P04348 - Upper Body Mount Bushing
- Position 7 & 8
- 4 of 04P04344 - Upper Body Mount Bushing
- 4 of 04P04345 - Lower Body Mount Bushing
- 4 of 15.10.548.39 - .875" X .625" X 1.625"
- 4 of 15.05.08.39 - 7/16-14 X 3"; Bolt
- 4 of 15.03.07.39 - 2-1/2" X 7/16" X 1/8"; Flat Washer
- 4 of 15.03.09.39 - 2.00" X 7/16" X1/8"; Flat Washer
- 4 of 15.03.04.39 - 1-1/8" X 7/16" X .100"; Flat Washer
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Body Mount Bushings Kit - Oldsmobile Cutlass - 3.4161
Energy Suspension's polyurethane bushings are resistant to both physical wear and contamination, ensuring a much longer lifespan for your Cutlass.
Energy Suspension's 3.4161
Restoring Your Classic?
When restoring a classic vehicle, making sure it can actually handle driving around is obviously step one. Ensuring that it rides smoothly comes as a close second. By replacing the body mounts you hit both birds with one stone. After decades of both driving and sitting around your body mounts will most certainly need to be replaced, if they haven't already. Without a dependable set of body mounts your vehicle will suffer from frequent alignment problems and rough rides.
Rubber Vs Polyurethane
This is Energy Suspension's 3.4161, a complete set of Hyperflex polyurethane body mounts for the '64 - '72 Oldsmobile Cutlass. The original body mounts on your Cutlass were made of soft rubber. This rubber is prone to warping over time, eventually cracking and rotting away. Energy Suspension's polyurethane bushings are resistant to both physical wear and contamination, ensuring a much longer lifespan for your Cutlass.
Complete Coverage for a Complete Kit
Since the 3.4161 is crafted with polyurethane instead of rubber your NVH might be slightly higher than it would be with rubber bushings. But the increase to both durability and longevity is well worth it. Not only that, but the 3.4161 includes all the necessary hardware, eliminating the need to go searching for a whole new hardware kit. The 3.4161 is also covered with Energy Suspension's 2-year warranty handled in-house here at DST.