Energy Suspension 35.5001 Sway Bar Bushings with Bracket 27mm (1.06 inch)

 

Sway Bar Bushings with Bracket 27mm (1.06 inch)

Manufacturer: Energy Suspension
Part Number: 35.5001

:(?)
Black
Red

:(?)
Free Lifetime Warranty Upgrade

:(?)
Accept Terms (3-4 weeks)
Price: $22.65

Suggested part for 35.5001: kll127
kll127 Sway Bar Lateral Locks - 25-27mm
Sway Bar Lateral Locks will not only improve the effectiveness of the sway bar, but will also prevent the bar from contacting and damaging other parts of the suspension.

Suggested part for 35.5001: DLL127
DLL127 Front Sway Bar Lateral Locks - 25-27mm
DST Silver Color - Limited Lifetime Warranty

Suggested part for 35.5001: 9.11110
9.11110 Formula 5 Prelube 3 - 5 mL Tubes
3 - 5ML High Performance Grease by Energy

  • Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.

question_answer Ask us a Question

Energy Suspension Sway Bar Bushings

Energy Suspension Hyperflex Sway Bar bushings are made of polyurethane, which is a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Energy Suspension's sway bar bushings. Energy Suspension's polyurethane sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.

Energy Sway Bar Bushing
Faulty Rubber

Faulty Rubber

A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.

Be sure to use Formula 5

The sway bar bushing sees a lot of action, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.

Formula 5 Gif