81146 | Front and Rear Sway Bar Bushings - 21.50 mm | Acura NSX

  • 81146 360image 1
  • 81146 Front and Rear Sway Bar Bushings - 21.50 mm (0.84 inch)
  • 81146 Front and Rear Sway Bar Bushings - 21.50 mm (0.84 inch)
  • 81146 Front and Rear Sway Bar Bushings - 21.50 mm (0.84 inch)
  • 81146 Front and Rear Sway Bar Bushings - 21.50 mm (0.84 inch)
  • 81146 Front and Rear Sway Bar Bushings - 21.50 mm (0.84 inch)
  • 81146 360image large 1

Front and Rear Sway Bar Bushings - 21.50 mm (0.84 inch)

Manufacturer: Prothane
Part Number: 81146

:(?)
Black
Red

:(?)
Accept Terms (10-12 weeks)
Price: $27.32

  • 4 of Sway Bar Bushings 21.50mm
  • 4 of Brackets
  • 6 of Super Grease
Suggested part for 81146: dll122
dll122 Front Sway Bar Lateral Locks - 21-22mm
DST's lateral locks prevent sway bar movement and fits OE and aftermarket bars.

Suggested part for 81146: 191750
191750 Prothane Super Grease - 3 Pack
3 - 5ML High Performance Grease by Prothane

  • Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."

question_answer Ask us a Question

FitmentFront and Rear Sway Bar Bushings - 21.50 mm (0.84 inch) 81146 fits these vehicles:

81146 | Front and Rear Sway Bar Bushings - 21.50 mm | Acura NSX

Thanks to the polyurethane used in the 8-1146 your sway bar's efficiency will not only be restored but now it will perform as if it was a size larger!

Prothane's 8-1146

Noisy NSX?

Your Acura NSX is a performance car, so there's no doubt that it comes as a surprise when you start hearing thunking sounds underneath your NSX and you also start having issues with your handling. The most prominent issue with your NSX would be the leaning. While taking corners your NSX feels like its leaning much farther than it should. Once you pull out of the corner you could hear, or even feel, a thunk from beneath your feet. These problems can be caused by failed OE sway bar bushings.

DHW008_one
DHW008_two

Soft rubber...

The OE bushings on your Acura NSX are made of soft rubber. This rubber is prone to stretching itself out over time, eventually cracking and rotting away. Once this happens your sway bar is left loose. Not only does this render the sway bar worthless, but the bar could be banging into other chassis parts, potentially causing even more damage. So, before this repair becomes very expensive, check out what Prothane has to offer!

...or durable polyurethane?

This is Prothane's 8-1146, a complete set of 22mm polyurethane sway bar bushings for the '91-'05 Acura NSX. These bushings feature an easy-install design with a split incorporated into the side. This split allows you to simply slip the bushing over the bar instead of having to slide it all the way into place, that also means you can keep the sway bar on the NSX during the install, saving you time and effort. Thanks to the polyurethane used in the 8-1146 your sway bar's effects will not only be restored but now it will perform as if it was a size larger! The 8-1146 also includes a grease-able bracket for each bushing. This bracket will allow you to apply grease to the bushings while they are still on the vehicle, further increasing their effective lifespan.

DHW008_two
DHW008_two

Easy to install, Lifetime coverage, Better performance...

Since the 8-1146 is made using polyurethane instead of soft rubber your NVH might increase slightly, but the safety of your other chassis parts, not to mention your restored handling, is well worth it. The 8-1146 also comes with a lifetime manufacturer defect warranty handled in-house here at DST.