dst-es409lt | Front Inner Tie Rod End | '73-'82 2WD Chevy K5 Blazer

  • dst-es409lt 360image 1
  • dst-es409lt Front Inner Tie Rod End
  • dst-es409lt Front Inner Tie Rod End
  • dst-es409lt Front Inner Tie Rod End
  • dst-es409lt Front Inner Tie Rod End
  • dst-es409lt 360image large 1

Front Inner Tie Rod End

Manufacturer: DST
Part Number: dst-es409lt
Price: $26.61

check_box In Stock check_box Ships Immediately


  • 1 - front inner tie rod
  • 1 - castle nut
  • 1 - zerk fitting
  • 1 - cotter pin
  • WARRANTY:

    DST carries a 5-Year Warranty.

    DST warrants their parts to be free of defects in materials and/or workmanship during this timeframe as measured from the date of purchase.

    If a DST part should fail due to materials or manufacturing defects while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentFront Inner Tie Rod End dst-es409lt fits these vehicles:
Details

dst-es409lt | Front Inner Tie Rod End | '73-'82 2WD Chevy K5 Blazer

Fits Left or Right Side

Front Inner Tie Rod End | '73-'86 Chevy C10 '73-'82 2WD Chevy K5 Blazer

Lock in your front end alignment with new DST tie rod ends for your C10 or K5 Blazer

Restoration For Everyone

Whether you are working on a farm truck or a restoration project, restoring your steering will pay dividends in both handling and tire life that any driver will appreciate. Use a DST front inner tie rod end to replace old and worn parts on your 1973-1986 Chevrolet C10 for crisp steering you'll notice immediately. Replacing all of your steering parts that are old enough to vote is a decent repair for your C10 or K5 Blazer but grabbing a pair of inner and outer tie rod ends will turn good into great for your front end.

Eliminate Loose Connections

You can feel worn steering parts when you turn the wheel on an older truck and feel the clank-clank-clank as you take up the tolerance of each worn joint and connection. Our Suspension.com experts have selected the best inner tie rod ends for your GMC or Chevy to eliminate those loose connections. Crisp steering will improve your time spent behind the wheel for better enjoyment out on the road.

Greaseable ball joints last longer and stand the test of time by allowing you to flush the tie rod end with fresh grease
Create crisp steering for your truck for better enjoyment out on the road with a new DST front inner tie rod end

Foundational Upgrades

New tie rod ends aren't just for replacing rusty parts, upgrading your truck with new chrome wheels or a nice set of mud tires increases the weight your steering has to shift around. Lock in your alignment with new DST tie rod ends that can handle the additional weight to protect your wheels and tires from uneven wear. Make sure your truck is ready and able to handle any upgrades you make when you install new front inner and outer tie rod ends from the experts at Suspension.com.

Long Term Solution

Longevity is another factor to consider when choosing parts for your classic vehicle. The greaseable ball joints and high quality materials of DST's tie rod ends combine to deliver long term service. Pick the parts that will stand the test of time for your truck and choose DST.

Replace parts old enough to vote with high quality steering parts hand selected by the Suspension.com experts
Fitment for dst-es409lt