Rear Shock Absorber | 1971-1987 Toyota Land Cruiser

  • monroe-34802 Rear Shock Absorber - Monroe Gas-Magnum

Rear Shock Absorber - Monroe Gas-Magnum

Manufacturer: Monroe
Part Number: monroe-34802
Price: $54.02

check_box In Stock check_box Ships Immediately


  • The Quick-Strut line comes with a Lifetime warranty handled through Monroe.
    The Roadmatic line is not covered by a warranty.
    We will provide the warranty form that will then be sent, by the customer, to Monroe and they handle the process from there.
    * All warranty claims are subject to approval by Monroe.
    Please contact us for further information.

    Limited to ONE replacement during guarantee period

question_answer Ask us a Question

FitmentRear Shock Absorber - Monroe Gas-Magnum monroe-34802 fits these vehicles:
Details

Rear Shock Absorber | 1971-1987 Toyota Land Cruiser

Specific Fitment Distinctions:

  • Position: Rear.
1989-1991 Hino FA14
1993-1997 Hino FA1415
1989-1991 Hino FB14
1992 Hino FB15
1993-1997 Hino FB1715
  • (Replaces OE Part Number(s) 485301910)
1998-2004 Hino FA1517
1998-2004 Hino FB1817
  • (Replaces OE Part Number(s) 485302510)
1971-1974 Toyota Land Cruiser
  • (with Chassis # FJ55)
  • For Rear (with FJ40 Chassis), use Monroe-34803.
1975-1979 Toyota Land Cruiser
  • (FJ55 Body)
1980 Toyota Land Cruiser
  • (FJ55 Body)
  • (with Chassis # FJ60)
1981-1987 Toyota Land Cruiser
  • (FJ60 Body)

Monroe Gas Magnum Shocks

Monroe Gas Magnum shocks are designed for vehicles that could use a little extra shock control. Whether you have a full size truck that constantly tows heavy loads, or a work van that carries a lot of extra weight around, Gas Magnum shocks can help with the harsher bounce of a heavier ride. These shocks have a larger diameter and a 2 inch reserve tube that holds more oil than OE shocks for better shock control and greater longevity of the shock itself.

gas magnum shocks monroe

monroe gas magnum shocks

Shocks for Heavy Duty Jobs

The heavy duty piston rod in the Gas Magnum is more durable than the rods in most original shocks and the seal is designed to self-lubricate resulting in less friction on the rod and longer effective lifespan of the shock. A nitrogen gas charge cuts down on harshness and shock fade and keeps the oil from foaming up when on a rough road which reduces the ability of the shock to control bumps and jolts to the vehicle. Gas Magnum shocks are covered by Monroe's limited lifetime warranty so you can rest assured that these shocks will get the job done over the long haul.


Which Carry the Load Shock or Strut is Right for Me?

  Magnum Strut Assembly Gas-Magnum Truck Shocks* Max-Air Shocks Load Adjusting Shocks* Magnum Light Truck Shocks*
ALL-IN-ONE Strut Solution for Multipurpose Half-Ton Trucks & Vans X        
Midsize / Full-Size Trucks & Vans   X      
Towing / Hauling X   X   X
Light Trucks That Tow Up to 1,200LBS**       X  
Limited Lifetime Warranty / Feel The Difference Guarantee X X      

* Does not support weight, helps improve control when under load.

** Capacity is limited by vehicle suspension, tires and transmission. See vehicle owner's manual for details/

Fitment for monroe-34802
YearsMakeModelPositionBody CodeNotes
1989 - 1991HinoFA14RearReplaces OE Part Number(s) 485301910
1993 - 1997HinoFA1415RearReplaces OE Part Number(s) 485301910
1998 - 2004HinoFA1517RearReplaces OE Part Number(s) 485302510
1989 - 1991HinoFB14RearReplaces OE Part Number(s) 485301910
1992HinoFB15RearReplaces OE Part Number(s) 485301910
1993 - 1997HinoFB1715RearReplaces OE Part Number(s) 485301910
1998 - 2004HinoFB1817RearReplaces OE Part Number(s) 485302510
1971 - 1974ToyotaLand CruiserRearwith Chassis # FJ55
1975 - 1979ToyotaLand CruiserRearFJ55
1980ToyotaLand CruiserRearFJ55with Chassis # FJ60
1981 - 1987ToyotaLand CruiserRearFJ60
Overview
GradePremium
Active or Passive SuspensionPassive
Dimensions
Extended Length22.75 in (577.9mm)
Compressed Length14 in (355.6mm)
Travel Length8.75 in (222.3mm)
Features
Gas ChargedYes
Adjustable Ride HeightNo
Adjustable CompressionNo
Adjustable ReboundNo
Materials, color & finish
ColorYellow
Cylinder FinishPainted
What's included
Dust Shield IncludedYes
Includes Bump StopNo
Mounting Hardware IncludedYes
OEM part numbers Monroe 34802 replaces

Monroe 34802 is an aftermarket replacement part. It replaces the original equipment part numbers listed below for the vehicles this part fits. It is not a genuine manufacturer part, and the numbers below are shown for identification only.

Vehicle manufacturerOEM part number replaced
Hino485301910
Hino485302510