Front Shock Absorber Replacement | 1995-1998 Ford B800

  • monroe-66629 Front Shock Absorber - Monroe Magnum

Front Shock Absorber - Monroe Magnum

Manufacturer: Monroe
Part Number: monroe-66629
Price: $92.70

check_box In Stock check_box Ships Immediately


  • The Quick-Strut line comes with a Lifetime warranty handled through Monroe.
    The Roadmatic line is not covered by a warranty.
    We will provide the warranty form that will then be sent, by the customer, to Monroe and they handle the process from there.
    * All warranty claims are subject to approval by Monroe.
    Please contact us for further information.

    Limited to ONE replacement during guarantee period

question_answer Ask us a Question

FitmentFront Shock Absorber - Monroe Magnum monroe-66629 fits these vehicles:
Details

Front Shock Absorber Replacement | 1995-1998 Ford B800

1994 Ford B700
  • Replaces OE part number: F4HT18045CB with 52 inch multi-leaf spring and with 1.38 inch bore shocks
  • For vehicles replacing OE part number: F1HT18045AA with 1.38 inch bore shocks use Monroe-66861
1995-1998 Ford B800
  • Replaces OE part number: F4HT18045CB with 52 inch multi-leaf spring and with 1.38 inch bore shocks
1994 Ford F700 and 1994 Ford F800
  • Replaces OE part number: F4HT18045CB with 1.38 inch bore shocks
  • For vehicles replacing OE part number: E0HT18045AA without 12,000lb axle, without 9,000lb axle with heavy duty suspension, and with 1.38 inch bore shocks use Monroe-66861
1995-1997 Ford F700 and 1995-1997 Ford F800
  • Replaces OE part number: F4HT18045CB with 1.38 inch bore shocks
1994 Ford FT900
  • Replaces OE part number: F4HT18045CB with 52 inch multi-leaf spring and with 1.38 inch bore shocks
  • For vehicles replacing OE part number: E9HZ18124A with low profile vehicle and with 1.38 inch bore shocks use Monroe-66861
1995 Ford FT900
  • Replaces OE part number: F4HT18045CB with 52 inch multi-leaf spring and with 1.38 inch bore shocks
Monroe Magnum heavy duty commercial shock absorber

Magnum Shocks

Large bore shock absorbers for durability, stability and comfort to handle high-mileage and severe use, delivering reduced cost per mile.

Heavy Duty Durability for Commercial Vehicles

PTFE Coated Bearing

Reduces friction between the rod and the rod guide for improved durability.

Robust Hydraulic Lock-Out

Hydraulic lock-out design* prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly while maintaining full rod strength.

Proprietary Shouldered Bushing

Shouldered bushing or bonded bushing with sleeve are used where applicable to prevent bushing walkout for improved quality and durability.

*Where applicable.

Monroe Heavy Duty

Full line offering of commercial vehicle ride control solutions backed by OE expertise and innovative technologies trusted by OE manufacturers to maximize vehicle performance.

Overview
GradePremium
Active or Passive SuspensionPassive
Dimensions
Extended Length816mm (32.125 in)
Compressed Length18.625 in (473.1mm)
Travel Length13.5 in (342.9mm)
Features
Gas ChargedYes
Adjustable Ride HeightNo
Adjustable CompressionNo
Adjustable ReboundNo
Materials, color & finish
ColorBlack
Cylinder FinishPainted
What's included
Dust Shield IncludedYes
Includes Bump StopNo
Mounting Hardware IncludedYes
OEM part numbers Monroe 66629 replaces

Monroe 66629 is an aftermarket replacement part. It replaces the original equipment part numbers listed below for the vehicles this part fits. It is not a genuine manufacturer part, and the numbers below are shown for identification only.

Vehicle manufacturerOEM part number replaced
FordF4HT18045CB
FordF4TH18045CB
FordF5HZ18124B