lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Knuckle Assemblies carry a 3 Year or 36,000 mile Warranty (whichever occurs first). And Moog CV Axles carry a 2 Year Warranty. Above warranties are based on customers who own a car, van, SUV or light truck (less than 8,000 lbs. or 3,625 kilograms).
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Limited to ONE replacement during guarantee period
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Front CV Axle Assembly-Passenger Side | Toyota Sienna 2004-2010
MOOG's Problem Solver
The Front CV Axle Assembly (MOOG-14E001R) takes power from the transmission and transfers it to the wheels to allow the vehicle to travel, turn and stop. For the Toyota Sienna (2004-2010), MOOG's Problem Solver line is designed to address common wear issues found in factory axles by promoting consistent power delivery and reliable handling while driving.
Signs of Wear and Tear
Apparently CV clicking is more noticeable at low-speed turns. As the axle wears, it can negatively affect steering and handling, leading to increased vibration and noise throughout the suspension system. Visible signs of failure may include a ruptured boot, which allows dirt and debris to enter the joint, causing premature wear or permanent damage.
Front CV Axle Assembly
The Front CV Axle Assembly uses inner and outer CV joints to transfer power from the transmission to the front wheels while still allowing the suspension and steering to move freely. When the axle assembly is replaced, drivers often notice reduced noise, less vibration, and smoother steering. The MOOG CV axle is designed for long-term reliability, with heat-treated bearings and housings that help maintain structural integrity. It also features rust protection, including a coating on the intermediate shaft as well as the inboard and outboard housings, helping it withstand harsh weather conditions.
Got A Worn CV Axle?
If your steering feels stiff, you hear clicking when turning, notice vibrations while driving, or spot grease leaking, it could be time to replace your CV axle. Replacing a worn axle helps restore smooth power delivery, reduce unwanted noise and vibration, and protect the drivetrain from further wear. MOOG's 14E001R is a dependable replacement option for keeping your Toyota Sienna driving comfortably and confidently.
| Overview | |
|---|---|
| Grade | Premium |
| Dimensions | |
|---|---|
| Compressed Length | 1026mm (40.39 in) |
| Studs, threads & splines | |
|---|---|
| Inboard Spline Quantity | 24 |
| Outboard Spline Quantity | 30 |
| Axle Nut Type | 12-Point |
| Axle Nut Thread Size | M22×1.5 |
| Materials, color & finish | |
|---|---|
| Inboard Boot Material | Neoprene |
| Outboard Boot Material | Neoprene |
| What's included | |
|---|---|
| ABS Tone Ring Included | Yes |
| Axle Nut Included | Yes |