MOOG 18E001L Front CV Axle Assembly - Driver Side

  • moog-18e001l 360image 1
  • moog-18e001l Front CV Axle Assembly - Driver Side
  • moog-18e001l Front CV Axle Assembly - Driver Side
  • moog-18e001l Front CV Axle Assembly - Driver Side
  • moog-18e001l Front CV Axle Assembly - Driver Side
  • moog-18e001l 360image large 1

Front CV Axle Assembly - Driver Side

Manufacturer: MOOG
Part Number: moog-18e001l
Price: $95.58

check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Knuckle Assemblies carry a 3 Year or 36,000 mile Warranty (whichever occurs first). And Moog CV Axles carry a 2 Year Warranty. Above warranties are based on customers who own a car, van, SUV or light truck (less than 8,000 lbs. or 3,625 kilograms).

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Limited to ONE replacement during guarantee period

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentFront CV Axle Assembly - Driver Side moog-18e001l fits these vehicles:
Details
For 2005-2006 Mazda 3
  • Fits Models with Manual Transmission ONLY
  • For 2005 - Fits Models Manufactured After 1/6/05 ONLY
For 2007-2008 Mazda 3
  • Fits Models with 2.3L L4 2260cc
  • Fits Models with 2.0L L4 2000cc122/cid Manual Transmission
For 2009-2010 Mazda 3 Sport
  • Fits Models with Manual Transmission ONLY
For 2011-2013 Mazda 3
  • Fits Naturally Aspirated Models ONLY
For 2006-2008 Mazda 5
  • Fits Models with Manual Transmission ONLY
For 2012-2015 Mazda 5
  • Fits Models with Manual Transmission ONLY
Overview
GradePremium
Dimensions
Compressed Length635mm (25 in)
Studs, threads & splines
Inboard Spline Quantity28
Outboard Spline Quantity28
Axle Nut TypeHex
Axle Nut Thread SizeM22×1.5
Materials, color & finish
Inboard Boot MaterialNeoprene
Outboard Boot MaterialNeoprene
What's included
ABS Tone Ring IncludedNo
Axle Nut IncludedYes
OEM part numbers MOOG 18E001L replaces

MOOG 18E001L is an aftermarket replacement part. It replaces the original equipment part numbers listed below for the vehicles this part fits. It is not a genuine manufacturer part, and the numbers below are shown for identification only.

Vehicle manufacturerOEM part number replaced
MazdaGG2625600H
MazdaGG2625600R0K
MazdaGG3125600B
MazdaGG3125600C
MazdaGG3425600G
MazdaGG4525600D
MazdaGG6125600A
MazdaGG6225600B