moog-ck620250 | Front Upper Control Arm Assembly | 1982-2003 Chevrolet S-10

  • moog-ck620250 Front Upper Control Arm and Ball Joint - Driver Side - With Offset Shaft
  • moog-ck620250 Front Upper Control Arm and Ball Joint - Driver Side - With Offset Shaft

Front Upper Control Arm and Ball Joint - Driver Side - With Offset Shaft

Manufacturer: MOOG
Part Number: moog-ck620250
Price: $187.13

check_box Free Shipping!check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

FitmentFront Upper Control Arm and Ball Joint - Driver Side - With Offset Shaft moog-ck620250 fits these vehicles:
Details

moog-ck620250 | Front Upper Control Arm Assembly | 1982-2003 Chevrolet S-10

Chevrolet Blazer 1995-2005 RWD.
  • For 2003-2004 LS RWD Only.
  • For Control Arm without Offset Shaft use ck620261 instead.
Chevrolet S10 1982 4WD and 1982-2003 RWD.
  • For Control Arm without Offset Shaft use ck620261 instead.
GMC Jimmy 1992-2001 RWD.
  • For Jimmy 1998-1999 SL, SLE, SLS, and SLT RWD Only.
  • For Jimmy 2000-2001 SLE, SLS, and SLT RWD Only.
  • For Control Arm without Offset Shaft use ck620261 instead.
GMC S15 1982 4WD and 1982-1990 RWD.
  • For Control Arm without Offset Shaft use ck620261 instead.
GMC S15 Jimmy 1983-1991 RWD.
  • For Control Arm without Offset Shaft use ck620261 instead.
GMC Sonoma 1991-2003 RWD.

Isuzu Hombre 1998-2000 RWD.

What is the Difference Between Moog R Series and CK Control Arms?

CK, K or RK? We here at Diverse Suspension Technologies get this question a whole lot. If you are putting parts on your vehicle, you want to know exactly what you are installing. It can be hard to do that with all of these letter designations. So here is all that you need to know to clear up the confusion.

Short Answer: R Series is a value-driven replacement part while the CK Series incorporates Moog's premium Problem Solver components for a better than OE upgrade.

Moog Stamped Arms
Moog Stamped Arms

CK (K): Moog Problem Solver

Starting with the CK and K. Whether you see a "K" designation or a "CK" designation, you are getting the same part. The CK and K are Moogs Premium line of control arms. Utilizing their "problem solver" technology, these control arms address common factory design issues providing a better than the original replacement for your vehicle. Most CK and K control arms include ball joints that are powder coated metal with gusher bearings giving them a long life. These ball joints are serviceable and have grease fittings. The CK and K arms also have problem solver bushings and a precise fit and form for easy installation.

RK: Moog R Series

The RK series is a more value-driven part. Because there are so many different vehicles both foreign and domestic, Moog has introduced the R-Series arms to provide replacements for a wide range of vehicles. The RK arms have OE fit and form geometry alignment, with pre-installed OE style bushings and most include the ball joints. However, these ball joints are not serviceable like the CK arms. All of the R Series arms have Moog validated construction and design, providing a less expensive alternative.

Moog Forged Arms
Moog Stamped Arms

Type and Warranty

Each line of control arms has Forged Steel, Stamped Steel, or Forged Aluminium arms to provide the best style for your specific vehicle. The Premium CK line has a limited lifetime warranty, and the RK has a 3 year warranty that are both handled through our awesome customer service team at DST. Whether you are looking for a "light on the wallet" OE replacement, or a "premium" control arm upgrade, Moog control arms are a great choice for your vehicle.

Fitment for moog-ck620250
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
BuickRegal1987-1982Front Left Upper Quantity 1
ChevroletBlazer2005-1995Front Left UpperRWD Quantity 1
ChevroletEl Camino1987-1985Front Left Upper Quantity 1
ChevroletMonte Carlo1988-1985Front Left Upper Quantity 1
ChevroletS102003-1983Front Left UpperRWD Quantity 1
ChevroletS101982Front Left Upper Quantity 1
GMCJimmy2001-1992Front Left UpperRWD Quantity 1
GMCS151990-1983Front Left UpperRWD Quantity 1
GMCS151982Front Left Upper Quantity 1
GMCS15 Jimmy1991-1983Front Left UpperRWD Quantity 1
GMCSonoma2003-1991Front Left UpperRWD Quantity 1
IsuzuHombre2000-1998Front Left UpperRWD Quantity 1
IsuzuHombre1997-1996Front Left Upper Quantity 1
OldsmobileCutlass Supreme1988-1982Front Left Upper Quantity 1
PontiacGrand Prix1987-1978Front Left Upper Quantity 1

question_answer Customer Questions and Answers


Question:
Do you have any instruction on part ck620250?
Answer:
Here is what we as a dealer have available https://fme-cat.com/livedocs/DYK11_102_ENG-R.pdf and https://fme-cat.com/livedocs/DYK10_103_ENG-R.pdf for more installation help you can Call Moog directly at 800-325-8886

Question:
Can the ball joint be greased?
Answer:
Yes, part number moog-ck620250 comes with a greaseable ball joint.

Question:
When do you need offset shaft
Answer:
The frames on those sag to the center of the vehicle causing the camber/caster to not adjust enough to get corrected

Question:
Will part ck620250 fit a 66 Chevrolet corvette?
Answer:
No, it will not.

Question:
What does the offset control arm do?
Answer:
The moog-ck620250 offset control arm will provide additional camber to help with alignment issues.