lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
The K80373 front lower ball joint provides an alternative to replacing the entire control arm which is costly and sometimes unnecessary.
Moog Problem Solver: K80373
You can't replace just the front lower ball joint?
The front lower ball joint has failed in your 2002-2006 Mitsubishi Lancer and there is not an available OE-replacement for it. This front ball joint cannot be serviced-meaning there's not a grease fitting available. If contaminants get in, they can't be flushed out causing problems. The result leads to the entire control arm having to be replaced. We here at DST know how frustrating that can be and have the solution.
Moog has a solution: Moog Problem Solver K80373
Moog's line of problem solver parts target factory defects or poor original design, replacing them with a better more durable part. K80373 front lower ball joint provides an alternative to replacing the entire front lower control arm which is costly and sometimes unnecessary.
Easy to Install
Moog engineered K80373 with a greaseable design, knurled housing, and snap ring for easy installation and secure mounting. Engineered into this part is a full ball stud with grease grooves and powdered metal gusher bearings and a patented domed cover plate. If you have any other questions about this part or how it works, please give our DST team a call.