Cadillac Ats 2018 Suspension Parts

Home » Cadillac » ATS » 2018
Front Suspension Strut - Monroe Sensa-Trac Premium Shock
Part Number: monroe-72629
Manufacturer: Monroe
  • Passenger Side
  • AWD
  • Price$158.09
    Front Suspension Strut - Monroe Sensa-Trac Premium Shock
    Part Number: monroe-72631
    Manufacturer: Monroe
  • Passenger Side
  • RWD
  • Price$164.75
    Front Suspension Strut - Monroe Sensa-Trac Premium Shock
    Part Number: monroe-72632
    Manufacturer: Monroe
  • Driver Side
  • RWD
  • Price$164.75
    Rear Shock Absorber - Monroe OE Spectrum
    Part Number: monroe-5664
    Manufacturer: Monroe
    Price$168.78
    Front Sway Bar Endlink - Driver Side
    Part Number: moog-k750672
    Manufacturer: MOOG
    Price$44.75
    Front Sway Bar Endlink - Passenger Side
    Part Number: moog-k750673
    Manufacturer: MOOG
    Price$44.75
    Front Sway Bar Endlink - Driver Side - All Wheel Drive
    Part Number: moog-k750680
    Manufacturer: MOOG
    Fits the all wheel drive in the front left position Center to center link under details 8.860in and over length is 10.24
    Price$36.16
    Front Stabilizer Bar Link - Passenger Side - AWD Only
    Part Number: moog-k750681
    Manufacturer: MOOG
    Center to center link under details 8.860in and over length is 10.24
    Price$44.42
    Rear Stabilizer Bar Link
    Part Number: moog-k750675
    Manufacturer: MOOG
    Price$42.23
    Steering Tie Rod End
    Part Number: moog-es801231
    Manufacturer: MOOG
    Price$86.15
    Front Outer Tie Rod End - Passenger Side
    Part Number: moog-es801232
    Manufacturer: MOOG
    Price$86.15
    Outer Tie Rod End - Passenger
    Part Number: moog-es801309
    Manufacturer: MOOG
    Price$114.13
    Front Outer Tie Rod End - Driver Side
    Part Number: moog-es801310
    Manufacturer: MOOG
    Price$114.13
    Inner Tie Rod End
    Part Number: moog-ev801399
    Manufacturer: MOOG
    Price$43.77
    Rear Lower Control Arm
    Part Number: moog-rk643300
    Manufacturer: MOOG
  • 2.0L L4 1998cc/122cid - 2014-2015 CTS
  • 3.6L V6 3564cc/217cid - 2014-2015 CTS
  • Price$36.05
    Rear Upper Trailing Arm
    Part Number: moog-rk643332
    Manufacturer: MOOG
    Price$41.10
    Rear Lower Rearward Control Arm
    Part Number: moog-rk643622
    Manufacturer: MOOG
    Price$41.78
    Front Wheel Bearing and Hub Assembly
    Part Number: moog-513401
    Manufacturer: MOOG
    Price$325.78
    Rear Wheel Bearing and Hub Assembly
    Part Number: moog-512663
    Manufacturer: MOOG
  • Envision - Front Fitment For AWD and FWD, Rear Fitment AWD ONLY
  • 3.6L V6 3564cc/217cid - CTS 2015, Camaro 2010-2013
  • 6.2L V8 6162cc/376cid - Camaro 2010-2013
  • Price$216.80
    EZ Cam XR Bolt (16MM - PAIR)
    Part Number: spc-81280
    Manufacturer: SPC
    • Make a two bolt strut adjustable up to +/- 1.75 degree camber with the EZCam™ from Specialty Products. Simply remove the upper bolt, install the EZCam, loosen the lower bolt, and dial in the required change.
    • SPC's patented EZCams:
      • Make camber changes a cost effective, quick one-person job without grinding
      • SPC’s 12.9 grade bolt provides the best clamp load with the highest safety factor in the industry
      • Use a Hex Chromate-free finish for 700 hr salt spray results vs the competitors’ ~20 hr, to avoid any hydrogen embrittlement issues, and to be environmentally friendly
      • Have markings on the bolt head to show you where the lobe is for easy orientation during adjustment.
    • Measure the OE threads, or order our EZSizer Magnet (p/n 20503) to quickly determine the EZCam you need, and replace the OE bolt to make the strut adjustable for life.
    • The 81139 Magnetic Camber Gauge is a great companion tool for the EZCam, attach it to the rotor and watch camber change as you roll the cam bolt.
    • Part No. 81260 - Pair For replacement of 14 mm bolts
    • Front Adjustment range: Camber +/- 1.75 degree
    • Installation time: .4 hr/side
    • Required: 1 kit per axle
    Price$27.18

    Don't see what you needed?

    Suspension.com wants to know...
    "What do your customers want us to make for them?"
    Tell us and we'll make sure they hear your vote!