Filters

Chevrolet Colorado 4wd 2016 Suspension Parts

LogoFront End Steering Rebuild Package Kit
Part Number: chev-colorado-15-18-moog-front-end-rebuild-kit
Manufacturer: MOOG
  • Does Not Fit the ZR2 Models
  • Price$357.46
    LogoFront Suspension Strut and Coil Spring Assembly - Monroe Quick-Strut
    Part Number: monroe-172919
    Manufacturer: Monroe
    Price$218.16
    LogoOespectrum Strut - Front
    Part Number: monroe-72919
    Manufacturer: Monroe
    Price$115.58
    LogoFront Strut Mount - Strut-Mate
    Part Number: monroe-902052
    Manufacturer: Monroe
    Price$48.76
    LogoRear Shock Absorber - Monroe OE Spectrum
    Part Number: monroe-37351
    Manufacturer: Monroe
    Price$84.35
    LogoFront Stabilizer Bar Link
    Part Number: moog-k700902
    Manufacturer: MOOG
    Price$29.77
    LogoFront Lower Ball Joint
    Part Number: rareparts-13867
    Manufacturer: Rare Parts
  • W/ 3200# Axle - 2019 Colorado, 2015 Canyon, 2017 Canyon, 2019 Canyon
  • Price$114.40
    LogoFront Lower Ball Joint
    Part Number: moog-k500365
    Manufacturer: MOOG
    Price$68.28
    LogoOuter Tie Rod End
    Part Number: moog-es801261
    Manufacturer: MOOG
    Price$63.55
    LogoInner Tie Rod End
    Part Number: moog-ev801271
    Manufacturer: MOOG
    Price$46.90
    LogoFront Alignment Camber Kit
    Part Number: moog-k100162
    Manufacturer: MOOG
    Price$98.08
    LogoFront Alignment Camber Kit
    Part Number: moog-k100163
    Manufacturer: MOOG
    Price$73.95
    LogoFront Alignment Cam Guide Pin
    Part Number: moog-k100206
    Manufacturer: MOOG
    Price$89.71
    LogoHD Alignment Cam Pins (8)
    Part Number: spc-86326
    Manufacturer: SPC
    • Replace bent damaged or lost factory guide pins with these heavy duty knurled pins from SPC and your slotted cam will work like it should again.
    • Every tech needs to have these easy to use pins on the shelf for when a GM 1500, 2500 or Colorado rolls on the rack.
    • Kit includes 8 pins.
    • Rear Replacement Part
    • Installation time: 0.3 hr/side
    • Packaging: Includes 8 pins
    Price$25.96
    LogoGM HD Truck Camber/Caster Adjuster Cam
    Part Number: spc-86376
    Manufacturer: SPC
    • Replace corroded or damaged original equipment alignment cams on GM 2500 and 3500 HD trucks and Chevy Colorados with this cam and bolt kit.
    • SPC's replacement camber and caster cam kit includes a provision for 3/8 inch drive ratchet wrench when the bolt head is difficult to reach.
    • Front Adjustment range: Cam/Cas -1.50 degree to +1.50 degree
    • Installation time: 0.3 hr/side
    • Required: 1 kit per wheel
    Price$44.67
    LogoFront Upper Control Arm and Ball Joint Assembly- Passenger Side
    Part Number: moog-rk623349
    Manufacturer: MOOG
    Price$100.18
    LogoControl Arm and Ball Joint Assembly - Driver Side
    Part Number: moog-rk623350
    Manufacturer: MOOG
    Price$100.18
    LogoFront Lower Passenger Side Control Arm and Ball Joint Assembly
    Part Number: moog-rk623444
    Manufacturer: MOOG
    Price$271.28
    LogoFront Lower Control Arm and Ball Joint Assembly - Driver Side
    Part Number: moog-rk623445
    Manufacturer: MOOG
    Price$271.28
    LogoFront Strut Mount Cap
    Part Number: rs005
    Manufacturer: SuperPro
    • Strut Cap, Spring Seat, Nuts and Washers
    • ReadyStrut Top Caps

    (?)
    Accept Terms (8-12 weeks)
    Price$63.99
    LogoFront Wheel Bearing and Hub Assembly
    Part Number: moog-515167
    Manufacturer: MOOG
    Price$251.12
    LogoSPC GM Heavy Duty Truck Tool
    Part Number: spc-45945
    Manufacturer: SPC
    • This wrench makes it easy to adjust the control arm cams on many modern GM and Chevy HD Trucks along with the new Colorado and Canyon.
    • The tool surrounds the entire perimeter of each cam to provide a solid no slip means to reach the hard-to-reach and often rusty OE cams.
    Price$35.38
    LogoGM Truck Lock Plates (PR)
    Part Number: spc-86321
    Manufacturer: SPC
    • Lock in caster and camber on the GM 2500 and 3500 or the Colorado / Canyon with these lock plates.
    • The OE cam may 'slip' after the OE's plastic tab has been removed for adjustment.
    • Simply replace the nut side cam with this plate and then you don't have to worry.
    • This kit will work with the factory bolt or with SPC's replacement Part No. SPC-86376.
    • Replacement Pins also available SPC-86326.
    • Locks in OEMA adjustment.
    • Installation time: 0.3 hr/side
    • Required: 1 kit per wheel
    Price$16.05

    Chevrolet Colorado 4wd 2016 | All Suspension Parts

    Dont just buy replacement suspension parts for your Chevrolet Colorado 4wd 2016, buy the absolutely BEST Chevrolet Colorado 4wd 2016 suspension parts. At Suspension.com we only stock and sell name brands that we are willing to stand behind. You can find the best suspension parts for your Chevrolet Colorado 4wd 2016 at the best prices at Suspension.com. So whether you need to replace your worn and sagging suspension bushings with performance replacements, or you are upgrading your OE suspension with larger sway bars and sway bar bushings - Suspension.com is where you'll find them.
    Ball Joints and Ball Joint Parts

    Ball Joints and Ball Joint Parts | Chevrolet Colorado 4wd 2016

    Control Arms and Control Arm Components

    Control Arms and Control Arm Components | Chevrolet Colorado 4wd 2016

    Drivetrain Parts

    Drivetrain Parts | Chevrolet Colorado 4wd 2016

    Shocks Struts and Related Parts

    Shocks Struts and Related Parts | Chevrolet Colorado 4wd 2016

    Sway Bars and Sway Bar Parts

    Sway Bars and Sway Bar Parts | Chevrolet Colorado 4wd 2016

    Tools

    Tools | Chevrolet Colorado 4wd 2016

    None Specified

    None Specified | Chevrolet Colorado 4wd 2016


    Don't see what you needed?

    Suspension.com wants to know...
    "What do your customers want us to make for them?"
    Tell us and we'll make sure they hear your vote!