Filters

Chevrolet Trax 2018 Suspension Parts

LogoFront Suspension Strut - Monroe Oespectrum Strut
Part Number: monroe-72934
Manufacturer: Monroe
  • Passenger Side
  • Price$132.50
    LogoFront Suspension Strut - Monroe Oespectrum Strut
    Part Number: monroe-72935
    Manufacturer: Monroe
  • Driver Side
  • Price$132.50
    LogoRear Shock Absorber - Monroe OE Spectrum
    Part Number: monroe-5699
    Manufacturer: Monroe
    Price$86.71
    LogoFront Bumper and Bellows Kit - Monroe-Strut-Mate
    Part Number: monroe-63638
    Manufacturer: Monroe
    Price$32.97
    LogoFront Sway Bar Endlink - Driver Side
    Part Number: moog-k750682
    Manufacturer: MOOG
    Fits the front left position
    Price$36.18
    LogoFront Sway Bar Endlink - Passenger Side
    Part Number: moog-k750683
    Manufacturer: MOOG
    Fits the front right position
    Standard design
    Price$36.18
    LogoFront Lower Ball Joint
    Part Number: moog-k500317
    Manufacturer: MOOG
    Price$43.24
    LogoFront Lower Ball Joint
    Part Number: rareparts-13770
    Manufacturer: Rare Parts
    Price$81.50
    LogoFront Outer Tie Rod End
    Part Number: moog-es801375
    Manufacturer: MOOG
    Price$22.33
    LogoFront Outer Tie Rod End
    Part Number: moog-es801558
    Manufacturer: MOOG
    Price$52.91
    LogoFront Inner Tie Rod End
    Part Number: moog-ev800936
    Manufacturer: MOOG
    More information on the part page
    Price$54.72
    LogoInner Tie Rod End
    Part Number: moog-ev801342
    Manufacturer: MOOG
    Price$33.65
    LogoFront Inner Tie Rod
    Part Number: rareparts-29327
    Manufacturer: Rare Parts
    RPO Code NJ1; Electric Non Variable Power

    Accept Terms (10-12 Weeks)
    Price$105.30
    LogoFront Lower Camber Bolt Kit
    Part Number: rareparts-16746
    Manufacturer: Rare Parts

    Accept Terms (10-12 Weeks)
    Price$46.50
    LogoEZ Cam XR Bolt (14MM - PAIR)
    Part Number: spc-81260
    Manufacturer: SPC
    • Make a two bolt strut adjustable up to +/- 1.75 degree camber with the EZCam™ from Specialty Products. Simply remove the upper bolt, install the EZCam, loosen the lower bolt, and dial in the required change.
    • SPC's patented EZCams:
      • Make camber changes a cost effective, quick one-person job without grinding
      • SPC’s 12.9 grade bolt provides the best clamp load with the highest safety factor in the industry
      • Use a Hex Chromate-free finish for 700 hr salt spray results vs the competitors’ ~20 hr, to avoid any hydrogen embrittlement issues, and to be environmentally friendly
      • Have markings on the bolt head to show you where the lobe is for easy orientation during adjustment.
    • Measure the OE threads, or order our EZSizer Magnet (p/n 20503) to quickly determine the EZCam you need, and replace the OE bolt to make the strut adjustable for life.
    • The 81139 Magnetic Camber Gauge is a great companion tool for the EZCam, attach it to the rotor and watch camber change as you roll the cam bolt.
    • Part No. 81260 - Pair For replacement of 14 mm bolts
    • Front Adjustment range: Camber +/- 1.75 degree
    • Installation time: .4 hr/side
    • Required: 1 kit per axle
    Price$22.11
    LogoAlignment Assortment Kit
    Part Number: moog-cam1a
    Manufacturer: MOOG
    Price$971.62
    LogoFront Axis Camber Alignment Bolt
    Part Number: moog-k90474
    Manufacturer: MOOG
    • Adjustable range from -1 3/4 to +1 3/4 degrees, 14mm bolt
    • 2 needed per vehicle
    Price$24.67
    LogoGM Rear Shim Set (18)
    Part Number: spc-71050
    Manufacturer: SPC
    • Make rear wheel alignment changes with SPC's stackable fixed change shims.
    • Change camber in +/- 0.25 degree increments and toe in +/- 0.10 degree increments.
    • Combine a toe shim with a camber shim to get the exact change required.
    • Stack up to two shims for maximum change.
    • Installation time: 0.5 hr/side
    • Required: 1 or 2 per wheel
      • Shim Set includes 2 each (18 shims)
      • 71051 - Toe +/- 0.10 degree
      • 71052 - Toe +/- 0.20 degree
      • 71053 - Toe +/- 0.30 degree
      • 71054 - Toe +/- 0.40 degree
      • 71055 - Toe +/- 0.50 degree
      • 71061 - Camber +0.25 degree
      • 71062 - Camber +0.50 degree
      • 71065 - Camber -0.25 degree
      • 71066 - Camber -0.50 degree
    Price$148.25
    LogoGM Rear Toe Shim +/- 0.10 Degree
    Part Number: spc-71051
    Manufacturer: SPC
    • Make rear wheel alignment changes with SPC's stackable fixed change shims.
    • Change camber in +/- 0.25 degree increments and toe in +/- 0.10 degree increments.
    • Combine a toe shim with a camber shim to get the exact change required.
    • Stack up to two shims for maximum change.
    • Installation time: 0.5 hr/side
    • Required: 1 or 2 per wheel

    (?)
    Accept Terms (5-8 weeks)
    Price$8.24
    LogoGM Rear Toe Shim +/- 0.20 Degree
    Part Number: spc-71052
    Manufacturer: SPC
    • Make rear wheel alignment changes with SPC's stackable fixed change shims.
    • Change camber in +/- 0.25 degree increments and toe in +/- 0.10 degree increments.
    • Combine a toe shim with a camber shim to get the exact change required.
    • Stack up to two shims for maximum change.
    • Installation time: 0.5 hr/side
    • Required: 1 or 2 per wheel

    (?)
    Accept Terms (5-8 weeks)
    Price$8.24
    LogoGM Rear Toe Shim +/- 0.30 Degree
    Part Number: spc-71053
    Manufacturer: SPC
    • Make rear wheel alignment changes with SPC's stackable fixed change shims.
    • Change camber in +/- 0.25 degree increments and toe in +/- 0.10 degree increments.
    • Combine a toe shim with a camber shim to get the exact change required.
    • Stack up to two shims for maximum change.
    • Installation time: 0.5 hr/side
    • Required: 1 or 2 per wheel

    (?)
    Accept Terms (5-8 weeks)
    Price$8.24
    LogoGM Rear Toe Shim - +/ 0.40 Degree
    Part Number: spc-71054
    Manufacturer: SPC
    • Make rear wheel alignment changes with SPC's stackable fixed change shims.
    • Change camber in +/- 0.25 degree increments and toe in +/- 0.10 degree increments.
    • Combine a toe shim with a camber shim to get the exact change required.
    • Stack up to two shims for maximum change.
    • Installation time: 0.5 hr/side
    • Required: 1 or 2 per wheel
    Price$8.24
    LogoGM Rear Toe Shim +/- 0.50 Degree
    Part Number: spc-71055
    Manufacturer: SPC
    • Make rear wheel alignment changes with SPC's stackable fixed change shims.
    • Change camber in +/- 0.25 degree increments and toe in +/- 0.10 degree increments.
    • Combine a toe shim with a camber shim to get the exact change required.
    • Stack up to two shims for maximum change.
    • Installation time: 0.5 hr/side
    • Required: 1 or 2 per wheel
    Price$8.24
    LogoGM Rear Camber Shim + 0.25 Degree
    Part Number: spc-71061
    Manufacturer: SPC
    • Make rear wheel alignment changes with SPC's stackable fixed change shims.
    • Change camber in +/- 0.25 degree increments and toe in +/- 0.10 degree increments.
    • Combine a toe shim with a camber shim to get the exact change required.
    • Stack up to two shims for maximum change.
    • Installation time: 0.5 hr/side
    • Required: 1 or 2 per wheel

    (?)
    Accept Terms (5-8 weeks)
    Price$8.24
    LogoGM Rear Camber Shim + 0.50 Degree
    Part Number: spc-71062
    Manufacturer: SPC
    • Make rear wheel alignment changes with SPC's stackable fixed change shims.
    • Change camber in +/- 0.25 degree increments and toe in +/- 0.10 degree increments.
    • Combine a toe shim with a camber shim to get the exact change required.
    • Stack up to two shims for maximum change.
    • Installation time: 0.5 hr/side
    • Required: 1 or 2 per wheel

    (?)
    Accept Terms (5-8 weeks)
    Price$8.24
    LogoGM Rear Camber Shim - 0.25 Degree
    Part Number: spc-71065
    Manufacturer: SPC
    • Make rear wheel alignment changes with SPC's stackable fixed change shims.
    • Change camber in +/- 0.25 degree increments and toe in +/- 0.10 degree increments.
    • Combine a toe shim with a camber shim to get the exact change required.
    • Stack up to two shims for maximum change.
    • Installation time: 0.5 hr/side
    • Required: 1 or 2 per wheel

    (?)
    Accept Terms (5-8 weeks)
    Price$8.24
    LogoGM Rear Camber Shim - 0.50 Degree
    Part Number: spc-71066
    Manufacturer: SPC
    • Make rear wheel alignment changes with SPC's stackable fixed change shims.
    • Change camber in +/- 0.25 degree increments and toe in +/- 0.10 degree increments.
    • Combine a toe shim with a camber shim to get the exact change required.
    • Stack up to two shims for maximum change.
    • Installation time: 0.5 hr/side
    • Required: 1 or 2 per wheel

    (?)
    Accept Terms (5-8 weeks)
    Price$8.24
    LogoFront Lower Control Arm and Ball Joint Assembly - Driver Side
    Part Number: moog-rk623137
    Manufacturer: MOOG
    Price$64.71
    LogoFront Lower Control Arm and Ball Joint Assembly - Passenger Side
    Part Number: moog-rk623138
    Manufacturer: MOOG
    Price$64.71
    LogoFront Lower Control Arm and Ball Joint Assembly - Driver Side
    Part Number: rareparts-13223
    Manufacturer: Rare Parts
    • 2016-2017 Trax - W/ FE2 Ride & Handling Suspension
    • 2018-2022 Trax - Except FE4 Special Suspension
    Price$169.78
    LogoFront Lower Strut Mount Cam Bolt Kit
    Part Number: rareparts-17608
    Manufacturer: Rare Parts
    • With 14mm Bolt
    • Double Offset; Allows +/- 1-1/4 degrees adjustment

    Accept Terms (10-12 Weeks)
    Price$41.22
    LogoRear Wheel Bearing and Hub Assembly
    Part Number: moog-512572
    Manufacturer: MOOG
    Price$236.91
    LogoRear Alignment Shim
    Part Number: moog-k100230
    Manufacturer: MOOG
    Price$33.93

    Chevrolet Trax 2018 | All Suspension Parts

    Dont just buy replacement suspension parts for your Chevrolet Trax 2018, buy the absolutely BEST Chevrolet Trax 2018 suspension parts. At Suspension.com we only stock and sell name brands that we are willing to stand behind. You can find the best suspension parts for your Chevrolet Trax 2018 at the best prices at Suspension.com. So whether you need to replace your worn and sagging suspension bushings with performance replacements, or you are upgrading your OE suspension with larger sway bars and sway bar bushings - Suspension.com is where you'll find them.
    Ball Joints and Ball Joint Parts

    Ball Joints and Ball Joint Parts | Chevrolet Trax 2018

    Control Arms and Control Arm Components

    Control Arms and Control Arm Components | Chevrolet Trax 2018

    Drivetrain Parts

    Drivetrain Parts | Chevrolet Trax 2018

    Sway Bars and Sway Bar Parts

    Sway Bars and Sway Bar Parts | Chevrolet Trax 2018


    Don't see what you needed?

    Suspension.com wants to know...
    "What do your customers want us to make for them?"
    Tell us and we'll make sure they hear your vote!