Filters

Chevrolet Trax 2021 Suspension Parts

LogoFront Bumper and Bellows Kit - Monroe-Strut-Mate
Part Number: monroe-63638
Manufacturer: Monroe
Price$32.97
LogoFront Outer Tie Rod End
Part Number: moog-es801558
Manufacturer: MOOG
Price$52.91
LogoFront Inner Tie Rod End
Part Number: moog-ev800936
Manufacturer: MOOG
More information on the part page
Price$54.72
LogoInner Tie Rod End
Part Number: moog-ev801342
Manufacturer: MOOG
Price$33.65
LogoFront Lower Camber Bolt Kit
Part Number: rareparts-16746
Manufacturer: Rare Parts

Accept Terms (10-12 Weeks)
Price$46.50
LogoAlignment Assortment Kit
Part Number: moog-cam1a
Manufacturer: MOOG
Price$971.62
LogoEZ Cam XR Bolt (14MM - PAIR)
Part Number: spc-81260
Manufacturer: SPC
  • Make a two bolt strut adjustable up to +/- 1.75 degree camber with the EZCam™ from Specialty Products. Simply remove the upper bolt, install the EZCam, loosen the lower bolt, and dial in the required change.
  • SPC's patented EZCams:
    • Make camber changes a cost effective, quick one-person job without grinding
    • SPC’s 12.9 grade bolt provides the best clamp load with the highest safety factor in the industry
    • Use a Hex Chromate-free finish for 700 hr salt spray results vs the competitors’ ~20 hr, to avoid any hydrogen embrittlement issues, and to be environmentally friendly
    • Have markings on the bolt head to show you where the lobe is for easy orientation during adjustment.
  • Measure the OE threads, or order our EZSizer Magnet (p/n 20503) to quickly determine the EZCam you need, and replace the OE bolt to make the strut adjustable for life.
  • The 81139 Magnetic Camber Gauge is a great companion tool for the EZCam, attach it to the rotor and watch camber change as you roll the cam bolt.
  • Part No. 81260 - Pair For replacement of 14 mm bolts
  • Front Adjustment range: Camber +/- 1.75 degree
  • Installation time: .4 hr/side
  • Required: 1 kit per axle
Price$22.11
LogoGM Rear Shim Set (18)
Part Number: spc-71050
Manufacturer: SPC
  • Make rear wheel alignment changes with SPC's stackable fixed change shims.
  • Change camber in +/- 0.25 degree increments and toe in +/- 0.10 degree increments.
  • Combine a toe shim with a camber shim to get the exact change required.
  • Stack up to two shims for maximum change.
  • Installation time: 0.5 hr/side
  • Required: 1 or 2 per wheel
    • Shim Set includes 2 each (18 shims)
    • 71051 - Toe +/- 0.10 degree
    • 71052 - Toe +/- 0.20 degree
    • 71053 - Toe +/- 0.30 degree
    • 71054 - Toe +/- 0.40 degree
    • 71055 - Toe +/- 0.50 degree
    • 71061 - Camber +0.25 degree
    • 71062 - Camber +0.50 degree
    • 71065 - Camber -0.25 degree
    • 71066 - Camber -0.50 degree
Price$148.25
LogoGM Rear Toe Shim +/- 0.10 Degree
Part Number: spc-71051
Manufacturer: SPC
  • Make rear wheel alignment changes with SPC's stackable fixed change shims.
  • Change camber in +/- 0.25 degree increments and toe in +/- 0.10 degree increments.
  • Combine a toe shim with a camber shim to get the exact change required.
  • Stack up to two shims for maximum change.
  • Installation time: 0.5 hr/side
  • Required: 1 or 2 per wheel

(?)
Accept Terms (5-8 weeks)
Price$8.24
LogoGM Rear Toe Shim +/- 0.20 Degree
Part Number: spc-71052
Manufacturer: SPC
  • Make rear wheel alignment changes with SPC's stackable fixed change shims.
  • Change camber in +/- 0.25 degree increments and toe in +/- 0.10 degree increments.
  • Combine a toe shim with a camber shim to get the exact change required.
  • Stack up to two shims for maximum change.
  • Installation time: 0.5 hr/side
  • Required: 1 or 2 per wheel

(?)
Accept Terms (5-8 weeks)
Price$8.24
LogoGM Rear Toe Shim +/- 0.30 Degree
Part Number: spc-71053
Manufacturer: SPC
  • Make rear wheel alignment changes with SPC's stackable fixed change shims.
  • Change camber in +/- 0.25 degree increments and toe in +/- 0.10 degree increments.
  • Combine a toe shim with a camber shim to get the exact change required.
  • Stack up to two shims for maximum change.
  • Installation time: 0.5 hr/side
  • Required: 1 or 2 per wheel

(?)
Accept Terms (5-8 weeks)
Price$8.24
LogoGM Rear Toe Shim - +/ 0.40 Degree
Part Number: spc-71054
Manufacturer: SPC
  • Make rear wheel alignment changes with SPC's stackable fixed change shims.
  • Change camber in +/- 0.25 degree increments and toe in +/- 0.10 degree increments.
  • Combine a toe shim with a camber shim to get the exact change required.
  • Stack up to two shims for maximum change.
  • Installation time: 0.5 hr/side
  • Required: 1 or 2 per wheel
Price$8.24
LogoGM Rear Toe Shim +/- 0.50 Degree
Part Number: spc-71055
Manufacturer: SPC
  • Make rear wheel alignment changes with SPC's stackable fixed change shims.
  • Change camber in +/- 0.25 degree increments and toe in +/- 0.10 degree increments.
  • Combine a toe shim with a camber shim to get the exact change required.
  • Stack up to two shims for maximum change.
  • Installation time: 0.5 hr/side
  • Required: 1 or 2 per wheel
Price$8.24
LogoGM Rear Camber Shim + 0.25 Degree
Part Number: spc-71061
Manufacturer: SPC
  • Make rear wheel alignment changes with SPC's stackable fixed change shims.
  • Change camber in +/- 0.25 degree increments and toe in +/- 0.10 degree increments.
  • Combine a toe shim with a camber shim to get the exact change required.
  • Stack up to two shims for maximum change.
  • Installation time: 0.5 hr/side
  • Required: 1 or 2 per wheel

(?)
Accept Terms (5-8 weeks)
Price$8.24
LogoGM Rear Camber Shim + 0.50 Degree
Part Number: spc-71062
Manufacturer: SPC
  • Make rear wheel alignment changes with SPC's stackable fixed change shims.
  • Change camber in +/- 0.25 degree increments and toe in +/- 0.10 degree increments.
  • Combine a toe shim with a camber shim to get the exact change required.
  • Stack up to two shims for maximum change.
  • Installation time: 0.5 hr/side
  • Required: 1 or 2 per wheel

(?)
Accept Terms (5-8 weeks)
Price$8.24
LogoGM Rear Camber Shim - 0.25 Degree
Part Number: spc-71065
Manufacturer: SPC
  • Make rear wheel alignment changes with SPC's stackable fixed change shims.
  • Change camber in +/- 0.25 degree increments and toe in +/- 0.10 degree increments.
  • Combine a toe shim with a camber shim to get the exact change required.
  • Stack up to two shims for maximum change.
  • Installation time: 0.5 hr/side
  • Required: 1 or 2 per wheel

(?)
Accept Terms (5-8 weeks)
Price$8.24
LogoGM Rear Camber Shim - 0.50 Degree
Part Number: spc-71066
Manufacturer: SPC
  • Make rear wheel alignment changes with SPC's stackable fixed change shims.
  • Change camber in +/- 0.25 degree increments and toe in +/- 0.10 degree increments.
  • Combine a toe shim with a camber shim to get the exact change required.
  • Stack up to two shims for maximum change.
  • Installation time: 0.5 hr/side
  • Required: 1 or 2 per wheel

(?)
Accept Terms (5-8 weeks)
Price$8.24
LogoFront Lower Control Arm and Ball Joint Assembly - Driver Side
Part Number: moog-rk623137
Manufacturer: MOOG
Price$64.71
LogoFront Lower Control Arm and Ball Joint Assembly - Passenger Side
Part Number: moog-rk623138
Manufacturer: MOOG
Price$64.71
LogoFront Lower Control Arm and Ball Joint Assembly - Driver Side
Part Number: rareparts-13223
Manufacturer: Rare Parts
  • 2016-2017 Trax - W/ FE2 Ride & Handling Suspension
  • 2018-2022 Trax - Except FE4 Special Suspension
Price$169.78
LogoFront Lower Strut Mount Cam Bolt Kit
Part Number: rareparts-17608
Manufacturer: Rare Parts
  • With 14mm Bolt
  • Double Offset; Allows +/- 1-1/4 degrees adjustment

Accept Terms (10-12 Weeks)
Price$41.22
LogoRear Wheel Bearing and Hub Assembly
Part Number: moog-512572
Manufacturer: MOOG
Price$236.91
LogoRear Alignment Shim
Part Number: moog-k100230
Manufacturer: MOOG
Price$33.93

Chevrolet Trax 2021 | All Suspension Parts

Dont just buy replacement suspension parts for your Chevrolet Trax 2021, buy the absolutely BEST Chevrolet Trax 2021 suspension parts. At Suspension.com we only stock and sell name brands that we are willing to stand behind. You can find the best suspension parts for your Chevrolet Trax 2021 at the best prices at Suspension.com. So whether you need to replace your worn and sagging suspension bushings with performance replacements, or you are upgrading your OE suspension with larger sway bars and sway bar bushings - Suspension.com is where you'll find them.
Control Arms and Control Arm Components

Control Arms and Control Arm Components | Chevrolet Trax 2021

Drivetrain Parts

Drivetrain Parts | Chevrolet Trax 2021

Shocks Struts and Related Parts

Shocks Struts and Related Parts | Chevrolet Trax 2021


Don't see what you needed?

Suspension.com wants to know...
"What do your customers want us to make for them?"
Tell us and we'll make sure they hear your vote!