SPC 23100 Caster/Camber Sleeve Set - Adjustable up to +/- 2.75 Degrees

  • spc-23100 Caster/Camber Sleeve Set - Adjustable up to +/- 2.75 Degrees

Caster/Camber Sleeve Set - Adjustable up to +/- 2.75 Degrees

Manufacturer: SPC
Part Number: spc-23100

(?)
Accept Terms (5-8 weeks)
Price: $223.53

  • Specialty Products Company warrants its products to be free from defects in material and workmanship under normal use as per the following: A limited lifetime warranty applies to parts designated with the price code “A” and “AA”, only to the original consumer purchaser and only on the original vehicle on which it was installed. This limited lifetime warranty is in effect only when the product is installed by a professional technician. A limited lifetime warranty also applies to select hand tools, those identified by price code “B”, and only to the original consumer purchaser. Tools and equipment identified by price code “C” are warranted for a period of one year. Saws, Cutters and Punches are excluded and are warranted for a period of 90 days. Racing parts, indentified by price code “D” have no warranty stated or implied due to the inability to monitor the part’s modification, installation, and use, except that Specialty Products Company warrants its products to be free from defects in material and workmanship for 90 days after purchase under normal use. Final determination of the suitability of the parts for use contemplated by the buyer is the sole responsibility of the buyer. Any product that has been abused, altered, incorrectly installed or used in competition, racing or off road, is not covered. Product finish is excluded from this warranty as is normal wear and tear. Specialty Products Company shall not be liable for any special, direct, indirect, incidental, or consequential damages that might be claimed as a result of the failure of any part, including, but not limited to claims for delay, loss of profits, use, time or labor. Specialty Products Company shall not be liable for any damage or injury to persons or property resulting from improper installation or misuse of any part subject to this warranty. There are no other warranties expressed or implied extending beyond those set forth above. We reserve the right to make changes in design, materials and specifications without prior notice.

question_answer Ask us a Question

FitmentCaster/Camber Sleeve Set - Adjustable up to +/- 2.75 Degrees spc-23100 fits these vehicles:
Details
  • Change camber, caster or both at the same time with these sleeves.
  • Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve.
  • Using a sleeve puller, remove the existing sleeve. Install zero degree sleeve 23109 or 23139 or to determine the change needed, then install the correct sleeve.
  • To adjust, the sleeve may be lifted and rotated 1/8 turn.
  • Kit includes an assortment of (9) sleeves 23101: 0.25˚ 23102: 0.50˚ 23103: 0.75˚ 23104: 1.00˚ 23105: 1.25˚ 23106: 1.50˚ 23107: 1.75˚ 23108: 2.00˚ 23109: 0.00˚
Fitment for spc-23100