SPC 23820 Offset Ball Joint - Adjustable by +/- 1 Degree

  • spc-23820 Offset Ball Joint - Adjustable by +/- 1 Degree

Offset Ball Joint - Adjustable by +/- 1 Degree

Manufacturer: SPC
Part Number: spc-23820
Price: $150.55

check_box Free Shipping!check_box In Stock check_box Ships Immediately


  • Specialty Products Company warrants its products to be free from defects in material and workmanship under normal use as per the following: A limited lifetime warranty applies to parts designated with the price code “A” and “AA”, only to the original consumer purchaser and only on the original vehicle on which it was installed. This limited lifetime warranty is in effect only when the product is installed by a professional technician. A limited lifetime warranty also applies to select hand tools, those identified by price code “B”, and only to the original consumer purchaser. Tools and equipment identified by price code “C” are warranted for a period of one year. Saws, Cutters and Punches are excluded and are warranted for a period of 90 days. Racing parts, indentified by price code “D” have no warranty stated or implied due to the inability to monitor the part’s modification, installation, and use, except that Specialty Products Company warrants its products to be free from defects in material and workmanship for 90 days after purchase under normal use. Final determination of the suitability of the parts for use contemplated by the buyer is the sole responsibility of the buyer. Any product that has been abused, altered, incorrectly installed or used in competition, racing or off road, is not covered. Product finish is excluded from this warranty as is normal wear and tear. Specialty Products Company shall not be liable for any special, direct, indirect, incidental, or consequential damages that might be claimed as a result of the failure of any part, including, but not limited to claims for delay, loss of profits, use, time or labor. Specialty Products Company shall not be liable for any damage or injury to persons or property resulting from improper installation or misuse of any part subject to this warranty. There are no other warranties expressed or implied extending beyond those set forth above. We reserve the right to make changes in design, materials and specifications without prior notice.

question_answer Ask us a Question

FitmentOffset Ball Joint - Adjustable by +/- 1 Degree spc-23820 fits these vehicles:
Details
  • These offset ball joints replace the upper ball joint on late model Dodge Trucks.
  • They come in 1/2 degree increments and provide for independent wheel caster and/or camber changes up to 1-1/2 degrees.
  • Use installation sleeve set 23780 in conjunction with ball joint press 72509 for quick removal and installation of the ball joints.
  • They come with an installation template for accurate changes.
  • 23820 Cam/Cas +/- 1 degree
  • Installation time: 1.0 hr/side
  • Required: 1 per wheel
  • Recommended tools: 23780, 72509
Fitment for spc-23820
Overview
GradePerformance
Ride height & alignment
Adjustment Range1
Features
AdjustableNo
GreaseableYes
Materials, color & finish
MaterialSteel
What's included
Castle Nut IncludedNo