SPC 23960 Upper Ball Joint - Adjustable by +/- 3 Degrees

  • spc-23960 Upper Ball Joint - Adjustable by +/- 3 Degrees

Upper Ball Joint - Adjustable by +/- 3 Degrees

Manufacturer: SPC
Part Number: spc-23960

(?)
Accept Terms (5-8 weeks)
Price: $169.35

  • Specialty Products Company warrants its products to be free from defects in material and workmanship under normal use as per the following: A limited lifetime warranty applies to parts designated with the price code “A” and “AA”, only to the original consumer purchaser and only on the original vehicle on which it was installed. This limited lifetime warranty is in effect only when the product is installed by a professional technician. A limited lifetime warranty also applies to select hand tools, those identified by price code “B”, and only to the original consumer purchaser. Tools and equipment identified by price code “C” are warranted for a period of one year. Saws, Cutters and Punches are excluded and are warranted for a period of 90 days. Racing parts, indentified by price code “D” have no warranty stated or implied due to the inability to monitor the part’s modification, installation, and use, except that Specialty Products Company warrants its products to be free from defects in material and workmanship for 90 days after purchase under normal use. Final determination of the suitability of the parts for use contemplated by the buyer is the sole responsibility of the buyer. Any product that has been abused, altered, incorrectly installed or used in competition, racing or off road, is not covered. Product finish is excluded from this warranty as is normal wear and tear. Specialty Products Company shall not be liable for any special, direct, indirect, incidental, or consequential damages that might be claimed as a result of the failure of any part, including, but not limited to claims for delay, loss of profits, use, time or labor. Specialty Products Company shall not be liable for any damage or injury to persons or property resulting from improper installation or misuse of any part subject to this warranty. There are no other warranties expressed or implied extending beyond those set forth above. We reserve the right to make changes in design, materials and specifications without prior notice.

question_answer Ask us a Question

FitmentUpper Ball Joint - Adjustable by +/- 3 Degrees spc-23960 fits these vehicles:
Details
  • These heavy duty offset balljoints have a built in 3 degree offset which can be clocked to affect camber, caster, or both.
  • They are ideal for vehicles which cannot be aligned properly with the factory cam bolts due to installation of a lift or leveling kit.
  • As an additional benefit, they also raise the outer end of the upper control arm, which increases clearance between the arm and the droop travel stops on the frame. This restores droop travel on trucks with leveling kits, and eliminates NVH caused by arm to frame contact.
  • SPC uses hex chromate free finish and offers a 700hr salt spray test for the best corrosion protection available.
  • Adjustment Range: Camber/Caster ±3.00 degree
  • Installation Time: 0.6 hr/side
  • Required: 1 per wheel
  • Recommended Tools: 72509 Ball Joint Press
Fitment for spc-23960