SPC 25620 Isuzu/GM Adjustable Control Arms (PAIR)

  • spc-25620 Isuzu/GM Adjustable Control Arms (PAIR)

Isuzu/GM Adjustable Control Arms (PAIR)

Manufacturer: SPC
Part Number: spc-25620

(?)
Accept Terms (5-8 weeks)
Price: $832.13

  • Specialty Products Company warrants its products to be free from defects in material and workmanship under normal use as per the following: A limited lifetime warranty applies to parts designated with the price code “A” and “AA”, only to the original consumer purchaser and only on the original vehicle on which it was installed. This limited lifetime warranty is in effect only when the product is installed by a professional technician. A limited lifetime warranty also applies to select hand tools, those identified by price code “B”, and only to the original consumer purchaser. Tools and equipment identified by price code “C” are warranted for a period of one year. Saws, Cutters and Punches are excluded and are warranted for a period of 90 days. Racing parts, indentified by price code “D” have no warranty stated or implied due to the inability to monitor the part’s modification, installation, and use, except that Specialty Products Company warrants its products to be free from defects in material and workmanship for 90 days after purchase under normal use. Final determination of the suitability of the parts for use contemplated by the buyer is the sole responsibility of the buyer. Any product that has been abused, altered, incorrectly installed or used in competition, racing or off road, is not covered. Product finish is excluded from this warranty as is normal wear and tear. Specialty Products Company shall not be liable for any special, direct, indirect, incidental, or consequential damages that might be claimed as a result of the failure of any part, including, but not limited to claims for delay, loss of profits, use, time or labor. Specialty Products Company shall not be liable for any damage or injury to persons or property resulting from improper installation or misuse of any part subject to this warranty. There are no other warranties expressed or implied extending beyond those set forth above. We reserve the right to make changes in design, materials and specifications without prior notice.

question_answer Ask us a Question

Details
  • Improves droop travel: SPC’s arm has improved clearance to get around the spring bucket. With 80 degrees of articulation in the upgraded ball joint and free pivoting bushings, SPC's arm gives you maximum droop travel.
  • Improve your drivability and tracking back: When you lift your truck you affect caster and camber. SPC’s arms have +1 degree of caster built into them. Using its patented ball joint design the arm will get you 0 degree to +4 degree of caster and ±3 degree of camber, so you can put your alignment angles back to specification.
  • Adjust your tire where you want it in the wheel well: Use adjustment in the control arm and on the OE lower cams to maximize alignment angles and move oversized tires forward in the wheel well to minimize or avoid fender trimming.
  • Adjustment range: Camber ±3.00 degree
  • Caster 0.0 degree to +4.00 degree
  • Installation time: .8 hr/side
  • Replacement Boot Kit Available
  • Replacement Ball Joint Kit Available
Overview
GradePerformance
Ride height & alignment
AdjustmentCAMBER ±3.00, CASTER 0.0 TO +4.0
Studs, threads & splines
Ball Joint Stud TypeThreaded
Features
AdjustableYes
Ball Joint Mounting TypeBolt In
GreaseableNo
Materials, color & finish
MaterialSteel
ConstructionCasting/Forged
Bushing MaterialSynthetic Elastomer
Bushing ColorBlack
What's included
Ball Joint IncludedYes
Bushings IncludedYes
Grease Fitting IncludedNo