SPC 40915 Cam Extractor Press Tool

  • spc-40915 Cam Extractor Press Tool

Cam Extractor Press Tool

Manufacturer: SPC
Part Number: spc-40915
Price: $195.22

check_box Free Shipping!check_box In Stock check_box Ships Immediately


  • Specialty Products Company warrants its products to be free from defects in material and workmanship under normal use as per the following: A limited lifetime warranty applies to parts designated with the price code “A” and “AA”, only to the original consumer purchaser and only on the original vehicle on which it was installed. This limited lifetime warranty is in effect only when the product is installed by a professional technician. A limited lifetime warranty also applies to select hand tools, those identified by price code “B”, and only to the original consumer purchaser. Tools and equipment identified by price code “C” are warranted for a period of one year. Saws, Cutters and Punches are excluded and are warranted for a period of 90 days. Racing parts, indentified by price code “D” have no warranty stated or implied due to the inability to monitor the part’s modification, installation, and use, except that Specialty Products Company warrants its products to be free from defects in material and workmanship for 90 days after purchase under normal use. Final determination of the suitability of the parts for use contemplated by the buyer is the sole responsibility of the buyer. Any product that has been abused, altered, incorrectly installed or used in competition, racing or off road, is not covered. Product finish is excluded from this warranty as is normal wear and tear. Specialty Products Company shall not be liable for any special, direct, indirect, incidental, or consequential damages that might be claimed as a result of the failure of any part, including, but not limited to claims for delay, loss of profits, use, time or labor. Specialty Products Company shall not be liable for any damage or injury to persons or property resulting from improper installation or misuse of any part subject to this warranty. There are no other warranties expressed or implied extending beyond those set forth above. We reserve the right to make changes in design, materials and specifications without prior notice.

question_answer Ask us a Question

FitmentCam Extractor Press Tool spc-40915 fits these vehicles:
Details
  • Use this press tool to remove OE cam sleeves from Toyota trucks. The extended length forcing screw allows you to remove the sleeve without removing the steering rack.
  • Recommend when installing our 25425, 25430, 25435, 25440, 25445, and 25450 replacement Toyota cams.
  • Note: In some cases the tubes may be solidly corroded in place and even the Cam Extractor may not be able to break them free.
Fitment for spc-40915

All Vehicles: Cam Extractor Tool.

YearsMakeModelSubModelPositionDrive Wheel
2010 - 2023LexusGX460Front
2003 - 2009LexusGX470Front
2008 - 2011, 2013 - 2021LexusLX570Front
1996 - 2024Toyota4RunnerFront
2007 - 2014ToyotaFJ CruiserFront
2008 - 2011, 2013 - 2021ToyotaLand CruiserFront
1986 - 1994ToyotaPickupFront4WD
2001 - 2022ToyotaSequoiaFront
1993 - 1998ToyotaT100Front4WD
1995 - 1997ToyotaTacomaFront4WD
1998 - 2000ToyotaTacomaDLX, Limited, Pre Runner, SR5Front4WD, RWD
2001 - 2003ToyotaTacomaDLX, Pre RunnerFront4WD, RWD
2004 - 2009ToyotaTacomaPre RunnerFront4WD, RWD
2010 - 2014ToyotaTacomaPre Runner, TRD SportFront4WD, RWD
2015ToyotaTacomaPre Runner, TRD Pro, TRD SportFront4WD, RWD
2016 - 2023ToyotaTacomaFront
2000 - 2021ToyotaTundraFront