SPC 66055 Rear Toe Adjustment Bushing - Chrysler LX

  • spc-66055 Rear Toe Adjustment Bushing - Chrysler LX

Rear Toe Adjustment Bushing - Chrysler LX

Manufacturer: SPC
Part Number: spc-66055
Rating star_borderstar_borderstar_borderstar_borderstar_border
:(?)
Accept Terms (5-8 weeks)
Price: $31.58
Suggested part for spc-66055: spc-40920
spc-40920 Bushings and Ball Joint Press Tool
Bushing press removal and installation tool. This bushing press will allow you to remove and install the spc-66055 without even removing the arms from the vehicle. Will need spc-66025 press adaptor kit
Suggested part for spc-66055: spc-66025
spc-66025 Bushing Press Adaptors / Sleeves
Bushing press sleeves and adaptors designed for the spc-66055. These are designed to be used with the spc-40920 bushing press in order to remove and install the spc-66055 without even taking the arms off the vehicle.
  • Specialty Products Company warrants its products to be free from defects in material and workmanship under normal use as per the following: A limited lifetime warranty applies to parts designated with the price code �A� and �AA�, only to the original consumer purchaser and only on the original vehicle on which it was installed. This limited lifetime warranty is in effect only when the product is installed by a professional technician. A limited lifetime warranty also applies to select hand tools, those identified by price code �B�, and only to the original consumer purchaser. Tools and equipment identified by price code �C� are warranted for a period of one year. Saws, Cutters and Punches are excluded and are warranted for a period of 90 days. Racing parts, indentified by price code �D� have no warranty stated or implied due to the inability to monitor the part�s modification, installation, and use, except that Specialty Products Company warrants its products to be free from defects in material and workmanship for 90 days after purchase under normal use. Final determination of the suitability of the parts for use contemplated by the buyer is the sole responsibility of the buyer. Any product that has been abused, altered, incorrectly installed or used in competition, racing or off road, is not covered. Product finish is excluded from this warranty as is normal wear and tear. Specialty Products Company shall not be liable for any special, direct, indirect, incidental, or consequential damages that might be claimed as a result of the failure of any part, including, but not limited to claims for delay, loss of profits, use, time or labor. Specialty Products Company shall not be liable for any damage or injury to persons or property resulting from improper installation or misuse of any part subject to this warranty. There are no other warranties expressed or implied extending beyond those set forth above. We reserve the right to make changes in design, materials and specifications without prior notice.

question_answer Ask us a Question

FitmentRear Toe Adjustment Bushing - Chrysler LX spc-66055 fits these vehicles:
Details

Fits Dodge Challenger, Dodge Charger, Chrysler 300, Dodge Magnum, and Chrysler Pacifica


  • Rear Adjustment Range: +/-1.5Degree Toe
  • Installation time: .3 hr/side
  • Required: 1 kit per wheel
The rear toe adjustment bushing for Chyrsler's LX platform allows for a +/-1.5 degree of alignment using an offset design.

This bushing is an improvement over the OE design that will from the factory give you only 1.0 degree of adjustment. If there has been any modification to your suspension, you likely require more than the 1.0 degree you can get from the OE part.

This kit is designed to allow for the replacement of the OE bushing without even removing the arm from the vehicle. This saves you time and money.

For further ease of installation, the original OE bushing can be replaced using p/n 40920 bushing press and p/n 66025 press adapter kit.

If you also need to adjust your camber, take a look at SPC p/n 66050 for +/-1.5degree of rear camber adjustment.