SPC 67690 Rear Ball Joint - Adjustable Camber - Ford

  • spc-67690 Rear Ball Joint - Adjustable Camber - Ford

Rear Ball Joint - Adjustable Camber - Ford

Manufacturer: SPC
Part Number: spc-67690

(?)
Accept Terms (5-8 weeks)
Price: $153.42

  • Specialty Products Company warrants its products to be free from defects in material and workmanship under normal use as per the following: A limited lifetime warranty applies to parts designated with the price code “A” and “AA”, only to the original consumer purchaser and only on the original vehicle on which it was installed. This limited lifetime warranty is in effect only when the product is installed by a professional technician. A limited lifetime warranty also applies to select hand tools, those identified by price code “B”, and only to the original consumer purchaser. Tools and equipment identified by price code “C” are warranted for a period of one year. Saws, Cutters and Punches are excluded and are warranted for a period of 90 days. Racing parts, indentified by price code “D” have no warranty stated or implied due to the inability to monitor the part’s modification, installation, and use, except that Specialty Products Company warrants its products to be free from defects in material and workmanship for 90 days after purchase under normal use. Final determination of the suitability of the parts for use contemplated by the buyer is the sole responsibility of the buyer. Any product that has been abused, altered, incorrectly installed or used in competition, racing or off road, is not covered. Product finish is excluded from this warranty as is normal wear and tear. Specialty Products Company shall not be liable for any special, direct, indirect, incidental, or consequential damages that might be claimed as a result of the failure of any part, including, but not limited to claims for delay, loss of profits, use, time or labor. Specialty Products Company shall not be liable for any damage or injury to persons or property resulting from improper installation or misuse of any part subject to this warranty. There are no other warranties expressed or implied extending beyond those set forth above. We reserve the right to make changes in design, materials and specifications without prior notice.

question_answer Ask us a Question

FitmentRear Ball Joint - Adjustable Camber - Ford spc-67690 fits these vehicles:
Details
  • Use this adjustable ball joint to get +/- 1.25 degree camber change on Ford's D3 Platform AWD vehicles like the Five Hundred, Taurus, Sable, Freestyle, and Taurus X from 2005 - 2009.
  • These vehicles tend to develop negative camber in the rear, but there is no factory correction.
  • To get change, you will need to press the OE ball joint out of the knuckle and replace it with this adjustable offset stud design from SPC.
  • Once loosely reasembled, you will be able to easily turn the 8mm hex on the stud and watch camber change.
  • Torque down the nut and your adjustment is locked in. On this adjustable ball joint SPC uses hex chromate-free finish and offers a 700hr salt spray test for the best corrosion protection available.
  • SPC recommends a shop press to press out the OE ball joint and press in the adjustable ball joint.
  • Rear Adjustment Range:
    • Camber: +/- 1.25 degrees
    • Installation time: 1.2 hr/side
    • Required: 1 kit per wheel
Overview
GradePerformance
Ride height & alignment
Adjustment Range+ or - 1.25
Features
AdjustableYes
GreaseableNo
Materials, color & finish
MaterialSteel
What's included
Castle Nut IncludedNo