SPC | Fiat Rear Shim Set | 71770

  • spc-71770 SPC Fiat Rear Shim Set (24)

SPC Fiat Rear Shim Set (24)

Manufacturer: SPC
Part Number: spc-71770
Price: $197.67

check_box Free Shipping!check_box In Stock check_box Ships Immediately


  • Specialty Products Company warrants its products to be free from defects in material and workmanship under normal use as per the following: A limited lifetime warranty applies to parts designated with the price code “A” and “AA”, only to the original consumer purchaser and only on the original vehicle on which it was installed. This limited lifetime warranty is in effect only when the product is installed by a professional technician. A limited lifetime warranty also applies to select hand tools, those identified by price code “B”, and only to the original consumer purchaser. Tools and equipment identified by price code “C” are warranted for a period of one year. Saws, Cutters and Punches are excluded and are warranted for a period of 90 days. Racing parts, indentified by price code “D” have no warranty stated or implied due to the inability to monitor the part’s modification, installation, and use, except that Specialty Products Company warrants its products to be free from defects in material and workmanship for 90 days after purchase under normal use. Final determination of the suitability of the parts for use contemplated by the buyer is the sole responsibility of the buyer. Any product that has been abused, altered, incorrectly installed or used in competition, racing or off road, is not covered. Product finish is excluded from this warranty as is normal wear and tear. Specialty Products Company shall not be liable for any special, direct, indirect, incidental, or consequential damages that might be claimed as a result of the failure of any part, including, but not limited to claims for delay, loss of profits, use, time or labor. Specialty Products Company shall not be liable for any damage or injury to persons or property resulting from improper installation or misuse of any part subject to this warranty. There are no other warranties expressed or implied extending beyond those set forth above. We reserve the right to make changes in design, materials and specifications without prior notice.

question_answer Ask us a Question

FitmentSPC Fiat Rear Shim Set (24) spc-71770 fits these vehicles:
Details

SPC | Fiat Rear Shim Set | 71770

  • Bring toe and camber back to factory specification on the rear of the Fiat 500 with these fixed change shims from SPC.
  • The 24 piece set includes two each of the toe shims that will adjust from -0.5 degree to + 0.5 degree in 1/8 degree increments and camber shims that will adjust from +/- 0.25 degree to +/- 1.0 degree in 1/4 degree increments.
  • Combine up to two shims to dial in both toe and camber.
  • Shims are also available individually. Fix tire wear issues and return proper handling.
  • Note: You will need inverted (female) torx socket E20 to remove the hub.
  • Set includes two each of the following (24 shims)
    • Toe Series UPC Code
    • 71771 - Toe Shim +0.13 degree
    • 71772 - Toe Shim +0.25 degree
    • 71773 - Toe Shim +0.38 degree
    • 71774 - Toe Shim +0.50 degree
    • 71776 - Toe Shim -0.13 degree
    • 71777 - Toe Shim -0.25 degree
    • 71778 - Toe Shim -0.38 degree
    • 71779 - Toe Shim -0.50 degree
    • 71781 - Camber Shim +/- 0.25 degree
    • 71782 - Camber Shim +/- 0.50 degree
    • 71783 - Camber Shim +/- 0.75 degree
    • 71784 - Camber Shim +/- 1.00 degree
  • Installation time: 0.5 hr/side
  • Required: 1 - 2 shim per wheel (depending on desired change)