SPC 81250 EZ Cam XR Bolt (12MM - PAIR)

  • spc-81250 360image 1
  • spc-81250 EZ Cam XR Bolt  (12MM - PAIR)
  • spc-81250 EZ Cam XR Bolt  (12MM - PAIR)
  • spc-81250 EZ Cam XR Bolt  (12MM - PAIR)
  • spc-81250 EZ Cam XR Bolt  (12MM - PAIR)
  • spc-81250 360image large 1

EZ Cam XR Bolt (12MM - PAIR)

Manufacturer: SPC
Part Number: spc-81250
Price: $22.11

check_box In Stock check_box Ships Immediately


  • Specialty Products Company warrants its products to be free from defects in material and workmanship under normal use as per the following: A limited lifetime warranty applies to parts designated with the price code “A” and “AA”, only to the original consumer purchaser and only on the original vehicle on which it was installed. This limited lifetime warranty is in effect only when the product is installed by a professional technician. A limited lifetime warranty also applies to select hand tools, those identified by price code “B”, and only to the original consumer purchaser. Tools and equipment identified by price code “C” are warranted for a period of one year. Saws, Cutters and Punches are excluded and are warranted for a period of 90 days. Racing parts, indentified by price code “D” have no warranty stated or implied due to the inability to monitor the part’s modification, installation, and use, except that Specialty Products Company warrants its products to be free from defects in material and workmanship for 90 days after purchase under normal use. Final determination of the suitability of the parts for use contemplated by the buyer is the sole responsibility of the buyer. Any product that has been abused, altered, incorrectly installed or used in competition, racing or off road, is not covered. Product finish is excluded from this warranty as is normal wear and tear. Specialty Products Company shall not be liable for any special, direct, indirect, incidental, or consequential damages that might be claimed as a result of the failure of any part, including, but not limited to claims for delay, loss of profits, use, time or labor. Specialty Products Company shall not be liable for any damage or injury to persons or property resulting from improper installation or misuse of any part subject to this warranty. There are no other warranties expressed or implied extending beyond those set forth above. We reserve the right to make changes in design, materials and specifications without prior notice.

question_answer Ask us a Question

FitmentEZ Cam XR Bolt (12MM - PAIR) spc-81250 fits these vehicles:
Details
  • Make a two bolt strut adjustable up to +/- 1.75 degree camber with the EZCam™ from Specialty Products. Simply remove the upper bolt, install the EZCam, loosen the lower bolt, and dial in the required change.
  • SPC's patented EZCams:
    • Make camber changes a cost effective, quick one-person job without grinding
    • SPC’s 12.9 grade bolt provides the best clamp load with the highest safety factor in the industry
    • Use a Hex Chromate-free finish for 700 hr salt spray results vs the competitors’ ~20 hr, to avoid any hydrogen embrittlement issues, and to be environmentally friendly
    • Have markings on the bolt head to show you where the lobe is for easy orientation during adjustment.
  • Measure the OE threads, or order our EZSizer Magnet (p/n 20503) to quickly determine the EZCam you need, and replace the OE bolt to make the strut adjustable for life.
  • The 81139 Magnetic Camber Gauge is a great companion tool for the EZCam, attach it to the rotor and watch camber change as you roll the cam bolt.
  • Part No. 81250 - Pair For replacement of 12mm bolts
  • Front Adjustment range: Camber +/- 1.75 degree
  • Installation time: .4 hr/side
  • Required: 1 kit per axle
Fitment for spc-81250