Name: SPC 83160 Camber Adjusting Cam Bolts (2)
Brand: SPC
SKU: spc-83160
Price: 35.80 USD
Availability: BackOrder

Warranty Information

Specialty Products Company warrants its products to be free from defects in material and workmanship under normal use as per the following: A limited lifetime warranty applies to parts designated with the price code �A� and �AA�, only to the original consumer purchaser and only on the original vehicle on which it was installed. This limited lifetime warranty is in effect only when the product is installed by a professional technician. A limited lifetime warranty also applies to select hand tools, those identified by price code �B�, and only to the original consumer purchaser. Tools and equipment identified by price code �C� are warranted for a period of one year. Saws, Cutters and Punches are excluded and are warranted for a period of 90 days. Racing parts, indentified by price code �D� have no warranty stated or implied due to the inability to monitor the part�s modification, installation, and use, except that Specialty Products Company warrants its products to be free from defects in material and workmanship for 90 days after purchase under normal use. Final determination of the suitability of the parts for use contemplated by the buyer is the sole responsibility of the buyer. Any product that has been abused, altered, incorrectly installed or used in competition, racing or off road, is not covered. Product finish is excluded from this warranty as is normal wear and tear. Specialty Products Company shall not be liable for any special, direct, indirect, incidental, or consequential damages that might be claimed as a result of the failure of any part, including, but not limited to claims for delay, loss of profits, use, time or labor. Specialty Products Company shall not be liable for any damage or injury to persons or property resulting from improper installation or misuse of any part subject to this warranty. There are no other warranties expressed or implied extending beyond those set forth above. We reserve the right to make changes in design, materials and specifications without prior notice.

Ask us a Question

FitmentCamber Adjusting Cam Bolts (2) spc-83160 fits these vehicles:

Details

These cams are used as an O.E. replacement on the front and/or rear and provide additional camber change.

Adjustment Range:

Front camber/caster +/- 2.0 degrees (depending on specific application)
Rear camber +/- 2.0 degree (depending on specific application)
Installation time: 0.4 hr/side
Required: 1 kit per wheel

Fitment for spc-83160

All Vehicles: O.E. Replacement.

Years	Make	Model	Position	Drive Wheel	Notes
1963 - 1974	Chevrolet	Corvette	Rear		Camber: plus or minus 2.00 Degrees
1975 - 1982	Chevrolet	Corvette	Rear	RWD	Camber: plus or minus 2.00 Degrees
1960 - 1971	Chrysler	300	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1960 - 1973	Chrysler	Imperial	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1960 - 1973	Chrysler	New Yorker	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1960 - 1973	Chrysler	Newport	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1960	Chrysler	Saratoga	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1960 - 1973	Chrysler	Town & Country	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1960 - 1961	Chrysler	Windsor	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1963 - 1964	Dodge	330	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1963 - 1964	Dodge	440	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1962 - 1965	Dodge	880	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1971 - 1974	Dodge	B100 Van	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1975 - 1980	Dodge	B100	Front Upper Control Arm	RWD	Camber/Caster: plus or minus 2.00 Degrees
1971 - 1974	Dodge	B200 Van	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1975 - 1980	Dodge	B200	Front Upper Control Arm	RWD	Camber/Caster: plus or minus 2.00 Degrees
1971 - 1974	Dodge	B300 Van	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1975 - 1980	Dodge	B300	Front Upper Control Arm	RWD	Camber/Caster: plus or minus 2.00 Degrees
1970 - 1973	Dodge	Challenger	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1966 - 1973	Dodge	Charger	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1971 - 1973	Dodge	Colt	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1965 - 1973	Dodge	Coronet	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1960 - 1961	Dodge	Custom	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1972 - 1974	Dodge	D100 Pickup	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1975 - 1979, 1985 - 1987	Dodge	D100	Front Upper Control Arm	RWD	Camber/Caster: plus or minus 2.00 Degrees
1977 - 1987	Dodge	D150	Front Upper Control Arm	RWD	Camber/Caster: plus or minus 2.00 Degrees
1972 - 1974	Dodge	D200 Pickup	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1975 - 1980	Dodge	D200	Front Upper Control Arm	RWD	Camber/Caster: plus or minus 2.00 Degrees
1981 - 1987	Dodge	D250	Front Upper Control Arm	RWD	Camber/Caster: plus or minus 2.00 Degrees
1972 - 1974	Dodge	D300 Pickup	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1975 - 1980	Dodge	D300	Front Upper Control Arm	RWD	Camber/Caster: plus or minus 2.00 Degrees
1981 - 1987	Dodge	D350	Front Upper Control Arm	RWD	Camber/Caster: plus or minus 2.00 Degrees
1978 - 1981	Dodge	D400	Front Upper Control Arm	4 X 2	Camber/Caster: plus or minus 2.00 Degrees
1978 - 1981	Dodge	D450	Front Upper Control Arm	4 X 2	Camber/Caster: plus or minus 2.00 Degrees
1960 - 1973	Dodge	Dart	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1961 - 1962	Dodge	Lancer	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1960	Dodge	Matador	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1965 - 1973	Dodge	Monaco	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1960 - 1961	Dodge	Phoenix	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1960 - 1961	Dodge	Pioneer	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1960 - 1973	Dodge	Polara	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1974	Dodge	Ramcharger	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1975 - 1989	Dodge	Ramcharger	Front Upper Control Arm	RWD	Camber/Caster: plus or minus 2.00 Degrees
1960 - 1961	Dodge	Seneca	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1966 - 1969	Ford	Fairlane	Front Lower Control Arm		Camber: plus or minus 2.00 Degrees
1966 - 1969	Ford	Falcon	Front Lower Control Arm		Camber: plus or minus 2.00 Degrees
1970	Ford	Falcon	Front Lower Control Arm	RWD	Camber: plus or minus 2.00 Degrees
1975 - 1980	Ford	Granada	Front Lower Control Arm	RWD	Camber: plus or minus 2.00 Degrees
1970 - 1974	Ford	Maverick	Front Lower Control Arm		Camber: plus or minus 2.00 Degrees
1975 - 1977	Ford	Maverick	Front Lower Control Arm	RWD	Camber: plus or minus 2.00 Degrees
1967 - 1973	Ford	Mustang	Front Lower Control Arm		Camber: plus or minus 2.00 Degrees
1966 - 1971	Ford	Ranchero	Front Lower Control Arm		Camber: plus or minus 2.00 Degrees
1968 - 1971	Ford	Torino	Front Lower Control Arm		Camber: plus or minus 2.00 Degrees
1966 - 1969, 1971 - 1974	Mercury	Comet	Front Lower Control Arm		Camber: plus or minus 2.00 Degrees
1975 - 1977	Mercury	Comet	Front Lower Control Arm	RWD	Camber: plus or minus 2.00 Degrees
1967 - 1974	Mercury	Cougar	Front Lower Control Arm		Camber: plus or minus 2.00 Degrees
1975 - 1979	Mercury	Cougar	Front Lower Control Arm	RWD	Camber: plus or minus 2.00 Degrees
1966 - 1971	Mercury	Cyclone	Front Lower Control Arm		Camber: plus or minus 2.00 Degrees
1975 - 1980	Mercury	Monarch	Front Lower Control Arm	RWD	Camber: plus or minus 2.00 Degrees
1968 - 1971	Mercury	Montego	Front Lower Control Arm		Camber: plus or minus 2.00 Degrees
1964 - 1973	Plymouth	Barracuda	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1965 - 1967	Plymouth	Belvedere II	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1960 - 1971	Plymouth	Belvedere	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1971 - 1973	Plymouth	Cricket	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1970 - 1973	Plymouth	Cuda	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1960 - 1961	Plymouth	Custom	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1970 - 1973	Plymouth	Duster	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1960 - 1963	Plymouth	Fleet Special	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1968 - 1973	Plymouth	Fury I	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1965 - 1973	Plymouth	Fury II	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1965 - 1973	Plymouth	Fury III	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1960 - 1973	Plymouth	Fury	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1972 - 1973	Plymouth	Gran Fury	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1967 - 1971	Plymouth	GTX	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1968 - 1973	Plymouth	Road Runner	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1965 - 1973	Plymouth	Satellite	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1960 - 1964	Plymouth	Savoy	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1971 - 1973	Plymouth	Scamp	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1960 - 1961	Plymouth	Sport Wagon	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1960 - 1961	Plymouth	Suburban	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1970	Plymouth	Superbird	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1974	Plymouth	Trailduster	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1975 - 1981	Plymouth	Trailduster	Front Upper Control Arm	RWD	Camber/Caster: plus or minus 2.00 Degrees
1960 - 1973	Plymouth	Valiant	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees
1967	Plymouth	VIP	Front Upper Control Arm		Camber/Caster: plus or minus 2.00 Degrees

SPC 83160 Camber Adjusting Cam Bolts (2)

Camber Adjusting Cam Bolts (2)

lock Warranty Information keyboard_arrow_down

question_answer Ask us a Question

Warranty Information

Ask us a Question