unarchive In The Box of 8.5120 keyboard_arrow_down
- 2 - 5459 - 5/8 inch - Sway Bar Bushings
- 1 - 911108 Formula 5 Prelube
- 1 - Installation Instructions - #17039
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 7 years or 750,000 miles when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Energy Suspension Sway Bar Bushings
Energy Suspension Hyperflex Sway Bar bushings are made of polyurethane, which is a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Energy Suspension's sway bar bushings. Energy Suspension's polyurethane sway bar bushings provide a secure grip on the sway bar and do not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.
Faulty Rubber
A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes your sway bar to lose its effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.
Be sure to use Formula 5
The sway bar bushing sees a lot of action, so make sure you grease it well with Energy Suspension's own Formula 5 Bushing Lubricant. Using plenty of grease is the best way to ensure a long lasting part without any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack or an 8 ounce tube.
Product Reviews for 8.5120 | Rear Sway Bar Bushings - 16 mm | Toyota Camry 1997-2001
- 5 Star (5)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 8.5120
starstarstarstarstar" Good "
Solved the rear suspension clunk on my 2000 Toyota Avalon. Also noticed decreased body roll on turns. Noticed however there is a slight gap at the split when installed on the stabilizer bar, and it was a bit difficult to install the bracket bolts back in, but it works OK.
verified_user Verified Buyer - Jonathan Woods - . Energy Suspension 8.5120 - 5 out of 5starstarstarstarstar" Very Impressed "
I have to say pair the front and rear bushing together and it's a very stiff and pleasant ride.
verified_user Verified Buyer - Martin Ortiz-Boscana - . Energy Suspension 8.5120 - 5 out of 5starstarstarstarstar" Great part "
Works as intended. But if you live where it snows a lot, the rusty small bolts will break when trying to remove them.
verified_user Verified Buyer - Kenneth Sucharzewski - . Energy Suspension 8.5120 - 5 out of 5starstarstarstarstar" Great "
Great Product! No squeaks or noises. Ordering the front ones and control arm bushings
verified_user Verified Buyer - Philemon Mesfun - . Energy Suspension 8.5120 - 5 out of 5