2006 Ford F-150 4WD Suspension Diagram

This interactive diagram shows the front suspension, steering, driveline and rear suspension of the 2006 Ford F-150 4x4. Hover over or tap any part to see what it does, the signs that it is worn, and the replacement parts we carry that fit your truck, down to the side and position.

2006 Ford F-150 4WD Suspension Diagram (Full Chassis)

FRONT
The whole chassis from above the driver side. The front of the truck is to the left.

2006 Ford F-150 4WD Front Suspension and Steering Diagram

PASSENGER SIDEDRIVER SIDEFRONT
Front suspension, steering and front differential from above the front.

2006 Ford F-150 4WD Rear Suspension Diagram

DRIVER SIDEPASSENGER SIDEREAR
Rear axle from above the rear driver side corner. The rear of the truck is toward the lower right.

We carry parts for it Not stocked yet Hover or tap any part.

Kits and packages for your 2006 Ford F-150 4WD

6 kits

Packages

Complete Suspension Bushing Kit - Ford F150 04-06
Qty per vehicle: 1
$455.24
View part
Front End Steering Rebuild Package Kit - F150 2WD 2004-2008
Includes
  • 2 × Outer Tie Rod End
  • 2 × Lower Ball Joint
  • Inner Tie Rod End (choose one)
$235.16
View package
Complete Shock Package Kit
Includes
  • 2 × Front Strut (Coilover Shock)
  • 2 × Rear Shock Absorber
$885.66
View package

Lift and leveling kits

See every part for the 2006 Ford F-150 4WD

The 2004 to 2008 F-150 4x4 uses independent front suspension. A forged aluminum lower arm and a forged steel upper arm hold each knuckle, and a coilover stands on the lower arm. CV axles drive the front wheels from a differential bolted to the frame, with the carrier on the driver side. Steering is a rack and pinion ahead of the differential, and the sway bar runs behind the lower arms. At the rear, a solid axle sits on leaf springs outboard of the frame rails, with the shocks ahead of the axle.

We carry replacement parts for 35 of the 42 components on this diagram, 163 parts in all. See every part for the 2006 Ford F-150 4WD.

Questions about the 2006 Ford F-150 4WD suspension

What are the most common front end wear items on a 2006 F-150 4x4?

Lower ball joints, upper control arms, inner and outer tie rod ends and sway bar links are the usual ones. Check them with the wheels off the ground, because a worn joint shows up as play you can feel by hand.

Is the upper ball joint sold separately?

The factory upper ball joint comes with the upper control arm, so most repairs replace the whole arm. Separate press-in upper joints fit some replacement arms only.

Does the 2004 to 2008 F-150 4x4 have torsion bars?

No. The front springs are coil springs on the front struts, and the rear springs are leaf springs. The 2004 F-150 Heritage, which is the older body style, is a different truck with different parts.

Do I need an alignment after replacing front end parts?

Yes. Replacing tie rods, ball joints, control arms or struts changes the alignment. Toe is set at the tie rods, and caster and camber at the cam bolts in the lower arm pivots.

Which trucks share this suspension?

The 2004 to 2008 F-150 4x4 and the 2006 to 2008 Lincoln Mark LT 4x4 share this layout. Some parts changed during the run, such as the front hubs in 2005, the sway bar links in late 2004, and the inner tie rods in late 2005, so the parts shown are the ones listed for the 2006 4WD truck.

Printable 2006 Ford F-150 4WD suspension diagrams

Numbered diagrams to print or save for the shop. The numbers match the numbered parts on the interactive diagram.

2006 Ford F-150 4WD Suspension Diagram (Full Chassis) with numbered parts
2006 Ford F-150 4WD Suspension Diagram (Full Chassis)
2006 Ford F-150 4WD Front Suspension and Steering Diagram with numbered parts
2006 Ford F-150 4WD Front Suspension and Steering Diagram
2006 Ford F-150 4WD Rear Suspension Diagram with numbered parts
2006 Ford F-150 4WD Rear Suspension Diagram