2013 Ford F-150 4WD Suspension Diagram

This interactive diagram shows the front suspension, steering, driveline and rear suspension of the 2013 Ford F-150 4x4. Hover over or tap any part to see what it does, the signs that it is worn, and the replacement parts we carry that fit your truck, down to the side and position.

2013 Ford F-150 4WD Suspension Diagram (Full Chassis)

FRONT
The whole chassis from above the driver side. The front of the truck is to the left.

2013 Ford F-150 4WD Front Suspension and Steering Diagram

PASSENGER SIDEDRIVER SIDEFRONT
Front suspension, steering and front differential from above the front.

2013 Ford F-150 4WD Rear Suspension Diagram

DRIVER SIDEPASSENGER SIDEREAR
Rear axle from above the rear driver side corner. The rear of the truck is toward the lower right.

We carry parts for it Not stocked yet Hover or tap any part.

Kits and packages for your 2013 Ford F-150 4WD

5 kits

Packages

Front End Steering Rebuild Package Kit
Includes
  • 2 × Outer Tie Rod End (driver and passenger)
  • 2 × Inner Tie Rod End
  • 2 × Lower Ball Joint
  • Upper Control Arm (optional)
$381.30
View package
Complete Shock Package Kit
Includes
  • 2 × Front Suspension Strut and Coil Spring Assembly - Monroe Quick-Strut
$749.96
View package

Lift and leveling kits

Lowering kits and coilovers

See every part for the 2013 Ford F-150 4WD

The 2013 F-150 4x4 uses independent front suspension. A wide lower arm and a forged upper arm hold each knuckle, and a coilover strut stands on the lower arm ahead of the CV axle. The CV axles bolt to a differential carried on the frame, with the carrier on the driver side. Steering is a rack and pinion with electric assist, mounted ahead of the differential, and the sway bar runs behind the lower arms. At the rear, a solid axle sits on leaf springs just outboard of the frame rails.

We carry replacement parts for 32 of the 38 components on this diagram, 140 parts in all. See every part for the 2013 Ford F-150 4WD.

Questions about the 2013 Ford F-150 4WD suspension

What are the most common front end wear items on a 2013 F-150 4x4?

Lower ball joints, upper control arms, inner and outer tie rod ends and sway bar links are the usual ones. Check them with the wheels off the ground, because a worn joint shows up as play you can feel by hand.

Is the upper ball joint sold separately?

The factory upper ball joint comes with the upper control arm, so most repairs replace the whole arm. A separate upper joint is listed too, for arms that accept a press-in joint.

Does my 2013 F-150 have electric or hydraulic power steering?

Trucks with the 3.5L, 3.7L and 5.0L engines have electric power steering, with the assist unit on the rack. Trucks with the 6.2L V8 kept a hydraulic rack, so check the engine before ordering inner tie rods or a rack.

Does the SVT Raptor use the same parts?

No. The SVT Raptor has its own control arms, lower ball joints, sway bar links, hubs and shocks, so this diagram's parts are for the other 4x4 trims.

Did the brakes change during this generation?

Yes. The 2012 and 2013 trucks share their front and rear brakes, but 2009 to 2011 trucks use different calipers, and the rear pads, rotors and parking brake shoes changed for 2012. The parts listed for your year show which fit.

Printable 2013 Ford F-150 4WD suspension diagrams

Numbered diagrams to print or save for the shop. The numbers match the numbered parts on the interactive diagram.

2013 Ford F-150 4WD Suspension Diagram (Full Chassis) with numbered parts
2013 Ford F-150 4WD Suspension Diagram (Full Chassis)
2013 Ford F-150 4WD Front Suspension and Steering Diagram with numbered parts
2013 Ford F-150 4WD Front Suspension and Steering Diagram
2013 Ford F-150 4WD Rear Suspension Diagram with numbered parts
2013 Ford F-150 4WD Rear Suspension Diagram