2016 Nissan Altima Suspension Diagram

This interactive diagram shows the front suspension, steering and rear suspension of the 2016 Nissan Altima sedan. Hover over or tap any part to see what it does, the signs that it is worn, and the replacement parts we carry that fit your car, down to the side and position.

2016 Nissan Altima FWD Suspension Diagram (Full Car)

FRONT
Both ends of the car from above the driver side. The front of the car is to the left.

2016 Nissan Altima FWD Front Suspension and Steering Diagram

PASSENGER SIDEDRIVER SIDEFRONT
Front struts, lower arms, steering rack and sway bar from above the front of the car.

2016 Nissan Altima FWD Rear Suspension Diagram

DRIVER SIDEPASSENGER SIDEREAR
Rear multi-link suspension from above the rear driver side corner. The rear of the car is toward the lower right.

We carry parts for it Not stocked yet Hover or tap any part.

Kits and packages for your 2016 Nissan Altima

2 kits

Packages

Front End Steering Rebuild Package Kit
Includes
  • 2 × Outer Tie Rod End (driver and passenger)
  • 2 × Inner Tie Rod
  • Front Lower Control Arm (optional)
$324.58
View package
Complete Shock Package Kit
Includes
  • 2 × Rear Shock Absorber
  • 2 × Front Strut (driver and passenger)
$634.82
View package

See every part for the 2016 Nissan Altima

The 2013 to 2018 Altima sedan uses MacPherson struts at the front, with the coil spring on the strut and a cast aluminium lower arm under each corner. The steering rack sits behind the front axle, and long links join the front sway bar to the struts. The rear is a multi-link design on its own subframe: a wide rear lower link carries the coil spring and the knuckle, a front lower link bolts to it from the subframe, an arched upper link sits on top, and the rear shocks are separate from the springs.

We carry replacement parts for 29 of the 38 components on this diagram, 87 parts in all. See every part for the 2016 Nissan Altima.

Questions about the 2016 Nissan Altima suspension

What are the most common suspension wear items on a 2016 Nissan Altima?

Front sway bar links and front lower control arms are the parts most often replaced, followed by the rear lower links, strut mounts and tie rod ends. A knock over small bumps at the front is most often a sway bar link.

What is the rear clunk that many 2013 to 2018 Altimas have?

Very often the rear lower link, the wide arm that holds the rear spring. Nissan bulletin NTB21-045 covers replacing both rear lower links for this noise, so ask a Nissan dealer whether a campaign or extended coverage applies before buying parts. Worn rear sway bar links make a lighter rattle.

Does the 2016 Nissan Altima have upper control arms at the front?

No. The front uses struts, so the strut itself locates the top of the knuckle. There is one lower control arm per side, with the ball joint built into the arm. The rear does have an upper link on each side.

Do I need an alignment after replacing suspension parts?

Yes, after replacing tie rods, struts, front lower arms or any rear link. Rear toe and camber are set at eccentric bolts on the rear links, so mark them before you take the rear apart.

Which years share this suspension?

The 2015 to 2017 Altima sedan shares the parts on this diagram. The 2013 and 2014 sedans use an earlier front lower arm, 2018 cars take a different front rotor, and the 2013 coupe is the older generation with its own suspension, so check the fit notes on each part.

Printable 2016 Nissan Altima suspension diagrams

Numbered diagrams to print or save for the shop. The numbers match the numbered parts on the interactive diagram.

2016 Nissan Altima FWD Suspension Diagram (Full Car) with numbered parts
2016 Nissan Altima FWD Suspension Diagram (Full Car)
2016 Nissan Altima FWD Front Suspension and Steering Diagram with numbered parts
2016 Nissan Altima FWD Front Suspension and Steering Diagram
2016 Nissan Altima FWD Rear Suspension Diagram with numbered parts
2016 Nissan Altima FWD Rear Suspension Diagram