• 11101 Front Sway Bar and Endlink Bushings - 23.62MM (15/16 Inch)
  • 11101 Front Sway Bar and Endlink Bushings - 23.62MM (15/16 Inch)

Front Sway Bar and Endlink Bushings - 23.62MM (15/16 Inch)

Manufacturer: Prothane
Part Number: 11101
Rating 270 Reviews


Price: $20.37

In Stock Ships Immediately


JEEP CJ5 CJ7 CJ8 | Front Sway Bar and Endlink Bushings

Only Fits 15/16 Inch Bar
FitmentFront Sway Bar and Endlink Bushings - 23.62MM (15/16 Inch) 11101 fits these vehicles:
  • 1 of Super Grease - 19-1750-001
  • 2 of Sway Bar Brackets - 10062
  • 8 of End Link Bushings - 66048
  • 2 of Front Sway Bar Bushings - 60209 (15/16 inches)
  • Suggested part for 11101: dll124dll124 Front Sway Bar Lateral Locks - 23-24mm
    DST Silver Color - Limited Lifetime Warranty

  • Suggested part for 11101: kll124kll124 Sway Bar Lateral Locks - 23-24mm
    WhiteLine Gold Color Plated - 3 Year warranty

  • Suggested part for 11101: 191750191750 Super Grease 3 Pack
    Prothane provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.

  • Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."
  • Cross Reference from 11101 to 2.5101Energy Suspension 2.5101
    Price: $23.34
    Warranty: 2 Year Warranty

Prothane Sway Bar Bushings

A sway bar bushing plays a huge role in your suspension, so don't settle for rubber. Prothane Sway Bar bushings are made of polyurethane, a much more durable material for suspension bushings than rubber. Polyurethane does not break down due to road grime, weather or oils the way the rubber can. Have the peace of mind knowing you have a long lasting part on your sway bar with Prothane's sway bar bushings. Prothane's polyurethane sway bar bushings provide a secure grip on the sway bar and does not warp over time. With this snug grip, your vehicle will see a performance boost similar to installing a larger sway bar.

Prothane Bushing Box

Faulty Rubber

Faulty Rubber

A sway bar's function is to maintain the maximum amount of road contact during tires. The sway bar is held to the frame of the vehicle with a sway bar bushing. Original Equipment rubber can warp and/or crack, losing its grip on the bar. This causes the your sway bar to lose it's effectiveness. Just look at the old rubber sway bar bushing to the left. Imagine how good of a grip that thing could keep on a sway bar. Go with Polyurethane.

Use Prothane's Super Grease

The metal sway bar rotates inside the sway bar bushings, so be sure to use the supplied Prothane's Super Grease to lubricate the bushings during installation. Its super important that you lubricate each bushing well to prevent any squeaking. If you'd like some extra grease just in case, pick up an extra 3 pack.

Prothane Control Arm Grease
Prothane 11101

Product Reviews for Front Sway Bar Bushings 11101

Prothane 11101

5 out of 5 based on 270 user reviews. Write a Review

The product was very solid and a good choice for replacement. The only problem I had the slots in the sway bar bushing straps were not big enough for the factory bolts on my 1984 CJ7. I reamed the slots out enough to accommodate the bolts and all was done. Thanks for the great price on a great product.
5 out of 5 - Very nice product easy to install. Big improvement.
Greg Barnes - . Prothane 11101

Product Reviews for Prothane Front Sway Bar Bushings

Perfect fit for Z-51 sway bars, the red looks good.
5 out of 5 - Great!
Kenny Chuculate - . Prothane 71177
Difficult to press it into the main bearing axles. But my wife found a brilliant method and then they went thru like knife in butter :-)
5 out of 5 - Wery good quality.
Oyvind Leiv Solhaug Lockertsen - . Prothane 61151
Quality was very good made 100% difference in the steering.
5 out of 5 - quality is great, fast service.
Gordon D McNally - . Prothane 41132
...took a chance on these bushings for an aftermarket sway bar & very glad that I did. These are high quality, less expensive than some & very efficient, in getting the job done. I will definitely purchase from Suspension.com again.
5 out of 5 - worked great
Edwin Rand - . Prothane 181123
The sway bar bushings solved the issue I had with rattling and a loose front feeling when cornering. They have held up well. I will be installing control bushings soon.
5 out of 5 - Review 2 Years Later
Michael D Putts - . Prothane 71190
Looks good with the yellow cad plating. The slotted holes allowed me to move the bar a little farther forward as Im running a shackle reversal and the links were very close to the axle. Lot of room now.
5 out of 5 - Exactly what I needed.
Ivan Granger - . Prothane 11110
Good fit, nice and tight OEM style. Did particularly notice any performance gains. Its poly though so last time will have to change it!
5 out of 5 - Good Fit
Donald Lightfoot - . Prothane 181128
These bushings are the best. Much more durable than the OEM rubber ones. Thats why I wanted to go with them. The polyurethane material withstands the normal aging from heat and elements and delivers a much more ridged response when cornering and going through turns and bumps.
5 out of 5 - Review 2 Years Later
Jock Wetmiller - . Prothane 71190
These things are still holding up like day one. Well worth the money.
5 out of 5 - Review 2 Years Later
ROBERT A ZABAWA - . Prothane 11123
No more groan sounds. This part fit perfectly on my Nissan.
5 out of 5 - Quality product!
Heldaro Silva - . Prothane 141123

Compare with Similar Parts

This Part


  • 270
  • This part
  • Bushing Material: Polyurethane

This Part

Energy Suspension

$23.34($2.97) more expensive

  • 4
  • Bushing Material: Polyurethane

View Part