• 15.1106 Motor Mount Inserts - Volkswagen
  • 15.1106 Motor Mount Inserts - Volkswagen
  • 15.1106 Motor Mount Inserts - Volkswagen
  • 15.1106 Motor Mount Inserts - Volkswagen

Motor Mount Inserts - Volkswagen

Manufacturer: Energy Suspension
Part Number: 15.1106
Rating 312 Reviews

Options


Black
Red
Exclusive for DST Customers: (Learn More)
Free Lifetime Warranty Upgrade
Quantity:
Price: $21.36

In Stock Ships Immediately


Details
Performance Polyurethane Motor Mount Inserts
Under High Performance Conditions, they Reduce Wheel Hop and Torque Induced Movement that can actually damage vehicle components.

Motor Mount Insert | 2006 Volkswagen Jetta | Energy

Performance Polyurethane Motor Mount Inserts
  • Performance Polyurethane Motor Inserts
  • Available for many popular sporty and performance front wheel drive vehicles.
  • A real must to use for sport compact competition and performance uses.
  • Reduces wheel hop and traction loss.
  • Prevents damage to other vehicle components.
  • Improves and even restores broken motor mounts.
  • Made of Energy's HYPER FLEX performance polyurethane.
Footnotes
  • No Footnotes From Energy Suspension
FitmentMotor Mount Inserts - Volkswagen 15.1106 fits these vehicles:
  • 1 - 1223 Mount Insert
  • 1 - Large Outer Metal Washer
  • 1 - Small End Washer
  • 1 - Installation Instructions #17518
  • Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
  • Cross Reference from 15.1106 to 22507Prothane 22507
    Polyurethane.
    Price: $17.97
    Warranty: Lifetime Warranty


Energy Suspension Motor Mount Inserts

Energy Suspension's motor mount inserts are crafted out of Hyperflex polyurethane, a material much more durable than rubber that can handle intense weight, heat, and pressure. Designed to fill the voids built into your OE motor mounts, these inserts will drastically increase the power transfer efficiency from your engine to the wheels. Since the voids were initially put there to reduce NVH, it stands to reason that filling in those voids will have the opposite effect. Installing Energy Suspension's Hyperflex motor mount inserts may increase your NVH, but the increase to overall performance is worth it to some drivers. To top it off, all of energy's motor mount inserts are covered by a two-year warranty handled in-house here at DST.

energy box

OE Motor Mount

The OE Motor Mount

OE motor mounts are usually made out of metal with holes strategically placed to keep most of the engine's vibrations from traveling to the cab. While the OE mounts are decent for the daily driver, the weekend warrior or straight up racer will probably look for an upgrade. Purchasing entire motor mounts can be rather pricey, but what other choice to these drivers have? Energy Suspension's Hyperflex Polyurethane motor mount inserts offer the performance boost of a solid motor mount without the higher cost.

Energy Suspension 15.1106

Product Reviews for Motor Mount Inserts 15.1106

Energy Suspension 15.1106



5 out of 5 based on 312 user reviews. Write a Review

This thing is great. I was concerned about the extra vibrations this may cause, but its really not too bad. I cut my wheel hop down by 90% while running the stock diff, with the LSD I recently installed, the wheel hop came back a bit, but overall it has been drastically reduced.\n\nI was irritated with other makers of this product, charging $30-$40 for this is silly, Energy Suspension has it priced where it should be. Great deal, great performance.\n\nOne minor complaint is that the hardness of this insert cant be found anywhere. Please add the hardness of this insert to the description. The only reason I bought it was the price, I thought, if its too hard, I am out $12, no biggie. It would have been nice to compare the hardness with other brands.\n\nBuy it. Cant go wrong.
4 out of 5 - Awesome.
Jim Perfect - . Energy Suspension 15.1106
Awesome product at a fantastic price with great customer service. I'm going to order bushings for my pickup truck.
5 out of 5 - Works great...
John Wilson - . Energy Suspension 15.1106
I recently installed the insert on my Mk6 GTI. Since this is a Mk5 insert, it required some trimming. Installation was probably done in less than 10 min. Wheel hop has drastically decreased and the car feels "tighter" when shifting. Recommended!
5 out of 5 - Great upgrade
Mirza Galijasevic - . Energy Suspension 15.1106
Installed this on my 2012 Mk6 GTI cut per mod shacks diagram (cut skinny pieces off completely and 3/8" off each side of main column) and it works perfect. Trimmed similar to the Autotech insert there is very little vibration at idle, hardly any while driving, and a touch in reverse. Helped give shifting a more positive, quick, and smooth feeling and WELL worth the cost/15 minutes for install!
5 out of 5 - Worked perfectly cut like modshack diagram.
Jeff J - . Energy Suspension 15.1106
This insert is made for the MKV GTI, however I was able to modify the insert in order to make it fit my vehicle. The major issue with motor mounts and inserts is the addition of noise, vibration and harshness, aka NVH. With the modifications that I made to the insert, removing the two small posts, and trimming about 1/4 of an inch from either side of the main body, it still provided the needed amount of stiffening which was able to cure all of my wheel hop issues in my vehicle, but at the same time significantly reduce the NVH in the vehicle. For the price of this unit, you and beat it.
5 out of 5 - Great product!
Andrew Bowers - . Energy Suspension 15.1106
Item was easy to install once the OEM mount was in place. It does make the shifting smoother. And no vibration can be felt doing idle or hard acceleration. A must do upgrade.
5 out of 5
Michael K Lee - . Energy Suspension 15.1106
Major changes in the behavior of the car. I didn't feel any vibrations from the engine. The car goes into gears very easily. The lag upon accelerating from a complete stop is vastly reduced. Recommended for installation on every car.
5 out of 5 - Overall Im satisfied with the purchase of this item.
OLGA KOCHUBINSKAYA - . Energy Suspension 15.1106
Easy to install and fits perfectly. Engine movement and wheel hop significantly reduced. A must buy item.
5 out of 5 - Excellent
Stanley Wong - . Energy Suspension 15.1106
Installs pretty easily. Make sure you use lots of lubrication or this can be a real pain to install. I used hand soap and a floor jack to slide mine up inside the mount. There's a VERY slight vibration at idle from the mount, but the rest of the driving experience is fantastic. This insert gets rid of almost all of the front-to-back in the engine and transmission.
5 out of 5 - Insert works great!
Scott Baumgart - . Energy Suspension 15.1106

Product Reviews for Energy Suspension Motor Mount Inserts

Mounts were overall easy to install. I love em, i can definitely tell a difference from before were the motor would slap back sometimes when i accelerate. But after installing these inserts I get direct power to the wheels!
5 out of 5 - Awsome, motor mounts have no more play
Reny Ros - . Energy Suspension 16.1111
Motor mount inserts were easy to put in if your current engine mounts arent warped. No tips no problems car feels more solid.
5 out of 5 - Review 2 Years Later
Grant Koebke - . Energy Suspension 7.1106
I installed these on my 2000 VW Beetle that has been lifted and is running 215/70-15 tires. The car had 160000 miles (now 187000) and as with most high mileage vehicles the underside of the engine and trans stay a little wet with oil. These mounts are directly underneath the engine and trans. The stock units swollen and doing a poor job of maintaining torque loads. The larger tires increase the daily torque loads and split the swollen OE mounts. The install was easy and straight forward. there was a noticeable improvement in feel and stability. After 27000 miles in the lifted configuration the parts are performing great.\nEditors Notes: Poly urethane is more resistant to oil than rubber but over time the oil cause the poly bushing to fail.
5 out of 5 - Review 2 Years Later
Trey McFarland - . Energy Suspension 15.1105
Love them,, no added vibration,, no more wheel hop! Much more positive feeling when launching,,, Ive been dealing with this problem for years and have tried filling the gaps in the rubber with silicone, and hot glue,, but nothing is work this well,,, if left stock rubber the torque strut only last for about 1 year,, I have replaced rubber with Poly and several other places on my car with the same results
5 out of 5 - Fantastic,, modified the two zip ties with four 75 lb zip ties and made 2 round retaining rings to keep the two halves together,, came packaged with 2 sketchy zip ties with squares that need to be trimmed and seem to bogus
Terry Bamber - . Energy Suspension 5.1105
5-star rating for these mounts, they are still holding up after 2 years.
5 out of 5 - Review 2 Years Later
Gonzalo Luevanos - . Energy Suspension 3.1145
Bought these in red for a zetec swap into my 98 escort wagon. Fast shipping and a great solid feel! Well worth the buy for some almost solid mounts. Ill be back for the poly suspension kit for sure! Thanks guys!
5 out of 5 - Awesome inserts! Very worth it!
Brian Santine - . Energy Suspension 4.1105
I am sorry to say that I have not installed this part yet. You know the story, life sometimes gets in the way. I did however install these into the steel clam shell of my old mount but they are not installed in the car. They do appear to be a nice improvement.
5 out of 5 - Review 2 Years Later
Paul Hadorn - . Energy Suspension 3.1116
I have a 96 GMC pickup and I started with the suspension Package and just got some new motor mounts. I installed the right side and just now moved the front Diff.out of the way so I can get the left side mounted. \nYour products are easy to install and the instructions easy to follow even for a 75 year old. Between VA appointments Im getting it done and will let you know how it all works out. I know that I will enjoy it.
5 out of 5 - Sure like everything that I have purchased for my truck.
Ron Binnie - . Energy Suspension 3.1121
Sorry for my english \nFriendly Richard
5 out of 5 - Hi Brit , yes the parts are install, and all is good .This part is perfect
Richard AMARA - . Energy Suspension 3.1116
Still work very well, no complaints.
5 out of 5 - Review 1 Year Later
Richard Suarez - . Energy Suspension 7.1112

Compare with Similar Parts


This Part

$21.36

  • 312
  • This part
  • Bushing Material: Polyurethane

This Part

Prothane

$17.97($3.39) cheaper

  • 1
  • Bushing Material: Polyurethane

View Part