description Installation Instructions keyboard_arrow_down
- None Available
unarchive In The Box of 41602 keyboard_arrow_down
- 1 of Transmission Mounts - 69113
- 1 of Nylon Hex Nuts - 31
- 1 of Flat Washers - 32
lock Warranty Information keyboard_arrow_down
- Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."
Transmission Mount - Dodge Coronet - Prothane 41602
Prothane Transmission Mounts
Polyurethane transmission mounts are much more durable, and a better-suited material for handling the stresses of a transmission. Rubber mounts aren't able to handle the abuse the transmission dishes out. When a rubber transmission mount breaks down, by wearing out or rotting due to weather, vehicle oils or road grime, the drivetrain sees a lot of sloppiness and poor performance. Not only are Prothane mounts much stronger, but polyurethane also is unaffected by UV rays, road grimes and vehicle oils, ensuring a long-lasting lifespan and performance.


Performance and Strength
Prothane manufactures these mounts to limit unwanted movement of the transmission and controlling torque. With these new polyurethane transmission mounts installed, you can achieve more power to the wheels with an almost indestructible mount, gaining an edge on the street or on the track. These mounts are engineered specifically for each vehicle, matching OE specifications and adding performance.

Product Reviews for Transmission Mount - Dodge Coronet - Prothane 41602
- 5 Star (3)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Prothane 41602
starstarstarstarstar" Very solid and well made. Not an exact duplicate of factory piece but fit properly "
Be prepared to wrestle with this piece a little as it is a bit taller than the age compressed Original mount. You may have to jack the transmission up quite a bit to install depending on the condition of the the old rubber mount. Fit well and lined up correctly.
verified_user Verified Buyer - Guy Jeanes - . Prothane 41602 - 5 out of 5starstarstarstarstar" Id give it a 7 on a scale of 10 "
I found this mount was .25 taller than the original. This caused some interference. Also it was a very tight fit to get in the crossmember. I had to sand it down a bit to get it to fit.
verified_user Verified Buyer - John Timothy Borrall - . Prothane 41602 - 5 out of 5starstarstarstarstar" Id give it a 7 on a scale of 10 "
I found this mount was .25 taller than the original. This caused some interference. Also it was a very tight fit to get in the crossmember. I had to sand it down a bit to get it to fit.
verified_user Verified Buyer - John Timothy Borrall - . Prothane 41602 - 5 out of 5compare_arrows Compare with Similar Parts

($35.56) more expensive
- starstarstarstarstar4
- Bushing Material: Polyurethane