description Installation Instructions keyboard_arrow_down
- None Available
unarchive In The Box of 7401 keyboard_arrow_down
- 4 of Metal Sleeves - 60700 (9/16 X .083 X .800 inches)
- 4 of Rear Sway Bar Endlink Bushings - 63024
lock Warranty Information keyboard_arrow_down
- Lifetime Warranty. Prothane guarantees all Prothane Suspension Parts to be free of defects in materials and workmanship (not due to abuse, neglect or misapplication) for the total time the vehicle remains with the original purchaser of the product(s). Should the products fail to meet these conditions, Prothane will replace the product, free of charge. This excludes any and all related labor charges. The product must be shipped to Prothane (postage prepaid) along with a copy of the original receipt."
shuffle Cross References 1keyboard_arrow_down
Polyurethane.
Price: $15.36
Warranty: 7 Year Warranty
Rear Sway Bar Endlinks - Chevrolet Corvette - 7401
Prothane Sway Bar Endlinks
Sway bars are incredibly important to both driver control and safety, and if sway bars are that important, then it stands to reason that the part tying the sway bar to the rest of the suspension is just as important. Used to connect your sway bar to the control arms, endlinks are what allows your sway bar to do its job. Without good endlinks your sway bar won't be able to perform at it's best.
Coverage and Performance
OE replacement endlinks come with rubber bushings. While rubber bushings are good at absorbing and redirecting impacts, they don't last long. Prothane's endlinks are a significant upgrade over OE replacements. Including brand-new hardware as well as new polyurethane bushings, Prothane's endlinks are made to be incredibly durable. To top it off, each of Prothane's endlinks are covered by a lifetime warranty handled in-house here at DST.
Product Reviews for Rear Sway Bar Endlinks - Chevrolet Corvette - 7401
- 5 Star (1)
-
-
- 50%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (1)
-
-
- 50%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Prothane 7401
starstarstarstar_borderstar_border" Quality, but extremely difficult to install "
Just like the title says, extremely hard to install. Wish I would have gone with heim setup for not that much more, or just buy whole stock end links to swap.
verified_user Verified Buyer - Nick Michels - . Prothane 7401 - 3 out of 5starstarstarstarstar" Very Good "
These sway bar endlink bushings fit good. I have a 20 ton shop press. So they went in easy. I lubed them liberally with marine grease and pressed them into the bar and bracket. You do have to remove the old OEM sleeves.
verified_user Verified Buyer - Gary G. - . Prothane 7401 - 5 out of 5