unarchive In The Box of 9.8103 keyboard_arrow_down
- 4 - End Link Grommet
lock Warranty Information keyboard_arrow_down
- Energy Suspension warrants its products against defects in workmanship and material for 24 months when used on passenger cars and light trucks. Products that have been abused, altered, or incorrectly installed are not covered. Energy Suspension will replace defective products or component parts, if inspection for factory personnel determines the part to be defective. Warranty replacement covers only the product. Labor claims, time loss, or freight charges will not be honored.
Energy Suspension Sway Bar Endlinks
While your sway bar is intended to maximize contact to the road, it can't accomplish this task on it's own. Sway bar endlinks are just as important as the sway bar itself. Connecting your sway bar to the rest of the suspension, these endlinks allow the sway bar to perform it's task. Should your endlinks wear down or fail completely, you will inevitably feel increased body roll while cornering.


Coverage and Performance
OE replacements will undoubtedly come with rubber bushings. While rubber can easily absorb vibrations from the road, it doesn't hold up for long. Crafted using Hyperflex polyurethane bushings and including a brand new set of hardware, Energy Suspension's endlinks are a significant upgrade over OE replacements. The Hyperflex polyurethane bushings are resistant to both chemicals and physical wear, increasing the endlink's durability and performance exponentially. Plus, Energy Suspension covers all of their endlinks with a two-year warranty handled in-house here at DST.

Product Reviews for 9.8103 | Universal End Link Grommets - Truck
- 5 Star (23)
-
-
- 96%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (1)
-
-
- 4%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
Energy Suspension 9.8103
starstarstarstarstar
Right size worked great.
verified_user Verified Buyer - MICHAEL HUTCHISON - . Energy Suspension 9.8103 - 5 out of 5starstarstarstarstar" Nice, well made and SOLID! "
I knew the inside diameters were too short to fit my end link bolts. I drilled the Grommets out using a sharp 1/2" bit. They finished slightly smaller ID but fit the bolts snugly. I replaced all 8 grommets on the rear end links. After installation, my 14 ton motorhome handles GREAT! Body sway is significantly reduced, it corners like its on rails! The rear sway bar is about 2 1/2 inches in diameter so you know theres a lot of force available. If needed, I will replace these grommets with the same part.
verified_user Verified Buyer - Charles A Goodman - . Energy Suspension 9.8103 - 5 out of 5starstarstarstarstar" Review 1 Year Later "
Suspension parts are still working wonderfully thank you very much for the follow-up.
verified_user Verified Buyer - Curtis Walker - . Energy Suspension 9.8103 - 5 out of 5starstarstarstarstar" Nice, well made and SOLID! "
I knew the inside diameters were too short to fit my end link bolts. I drilled the Grommets out using a sharp 1/2" bit. They finished slightly smaller ID but fit the bolts snugly. I replaced all 8 grommets on the rear end links. After installation, my 14 ton motorhome handles GREAT! Body sway is significantly reduced, it corners like its on rails! The rear sway bar is about 2 1/2 inches in diameter so you know theres a lot of force available. If needed, I will replace these grommets with the same part.
verified_user Verified Buyer - Charles A Goodman - . Energy Suspension 9.8103 - 5 out of 5