Front and Rear Sway Bar Kit - Nissan 350Z - bnk006

  • bnk006 Front and Rear Sway Bar and Endlinks Kit - 32mm Front Adjustable - 20mm Rear Adjustable
  • bnk006 Front and Rear Sway Bar and Endlinks Kit - 32mm Front Adjustable - 20mm Rear Adjustable

Front and Rear Sway Bar and Endlinks Kit - 32mm Front Adjustable - 20mm Rear Adjustable

Manufacturer: Whiteline
Part Number: bnk006
Price: $570.60

check_box Free Shipping!check_box In Stock check_box Ships Immediately

  • 1 of bnf33z - Front Sway Bar - 32mm - 2 Point Adjustable
  • 1 of bnr30z - Rear Sway Bar - 20mm - 3 Point Adjustable
  • 1 of klc110 - Front Sway Bar Endlinks
  • 1 of klc141 - Rear Sway Bar Endlinks
Suggested part for bnk006: whiteline-lubricant
whiteline-lubricant EZE Grease Polyurethane Bushing Lubricant and Prelube - 3 Pack
Whiteline provides grease to install these parts, but you can never have too much. Grab an extra 3-pack of grease so you can more liberally apply grease when installing.

  • WHITELINE bushing kits with part numbers from W00001 to WZZZZZ and KSK000 to KSKZZZ (Bushing Kits) are covered for their lifetime.

    WHITELINE performance products include sway bar/ anti-roll-kits (excluding installation components) and bracing and alignment kits with part numbers from BAF000 to BZZZZZ, KCA000 to KCAZZZ, KSB000 to KSBZZZ, KLC000 to KLCZZZ and KDT000 to KDTZZZ (Performance Products) are covered for 3 years from the date of original installation.
FitmentFront and Rear Sway Bar and Endlinks Kit - 32mm Front Adjustable - 20mm Rear Adjustable bnk006 fits these vehicles:

Front and Rear Sway Bar Kit - Nissan 350Z - bnk006

Contains BNF33Z, BNR30Z, KLC110 & KLC141 - essential to "Activate more grip"

Whiteline's BNK006

Adjustable Sway Bars...

Offering unmatched performance potential, Whiteline's BNK006 includes a 2-point adjustable front sway bar, a 3-point adjustable rear sway bar, two sets of adjustable endlinks, and matching sets of synthetic elastomer sway bar bushings. Designed to both outlast and outperform the OE, Whiteline's sway bars are always made from solid steel. In the BNK006's case, however, the sway bars are also adjustable, a feature the DST customer service team loves. Once installed, simply attach the endlinks to the mounting slot you desire and you're ready to roll. A quick tip on these adjustable sway bars: Using the inner holes will increase the stiffness of your new sway bars, while the outer holes decrease it.

BNK006 Bars
BNK006 Endlinks

... And Endlinks Too!

After upgrading your sway bars, replacing the OE endlinks is always recommended. With the BNK006 however, upgrading your OE links to Whiteline's adjustable endlinks is simply a must. Their heavy-duty design allows for high performance in all conditions, their 360-degree swivel head makes them easy to install, and you can even adjust these new endlinks while they're on your vehicle!

Durable and Easy to Install

Even with a set of high-quality, adjustable sway bars and endlinks, Whiteline felt they could still improve on the OE by designing new sway bar bushings. OE bushings are commonly made of a soft rubber that's prone to cracking and rotting away. Whiteline bushings, on the other hand, are made of synthetic elastomer. Easily able to shrug off both physical wear and corrosion, these bushings are guaranteed to both outlast and outperform the OE rubber. Plus, Whiteline made their bushings easy to install. Crafted with a split along one side, you can simply slip these bushings over the bar, instead of having to slide them into place. This split will disappear once you tighten on your sway bar and will have no negative effect on performance.

BNK006 Box

Greaseless Simplicity

If all of that wasn't enough, you don't even need to grease your new suspension parts! Whiteline uses a PTFE liner in their bushings, giving you a squeak-free ride with no extra hassle. Readily stocked in our Stephenville warehouse, we can have your BNK006 on its way to you on the same day you order it.

question_answer Customer Questions and Answers

On part number bnk006 I see you can change the stiffness of the bar by using the 3 different holes. Are the outer holes less stiff than stock?
On part number bnk006, the middle hole will be your stock stiffness, the inner hole will be stiffer than stock, and the outer hole will be less stiff than stock.