unarchive In The Box of dll130 keyboard_arrow_down
- 2 of DLL130 - Sway Bar Lateral Lock - 28-30mm
- 4 of Metal Allen Bolts
- 1 of Allen Wrench
lock Warranty Information keyboard_arrow_down
WARRANTY:
DST carries a 5-Year Warranty.
DST warrants their parts to be free of defects in materials and/or workmanship during this timeframe as measured from the date of purchase.
If a DST part should fail due to materials or manufacturing defects while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
DST Lateral Locks
Sway Bar Shifting: It's a real thing
When you take corners, the sway bar will shift laterally. That's not even a question. Lateral locks are installed just next to the sway bar mount to prevent excess lateral shifting. DST's DLL Lateral Locks are an easy DIY upgrade that takes just minutes but saves you so much more in sway bar performance. But why just take our word for it?
No More Shifting
After spending all the time and money tuning your suspension, it's such a drag (pun not intended) when your sway bar can't keep up with the performance of the rest of your chassis parts. New sway bar bushings and endlinks are awesome, but sometimes even those upgrades aren't enough. Well look no further, the solution to your sway bar shifting is here: DST Lateral Locks.
Take corners faster
Shifting in your sway bar decreases the efficiency of your sway bar set up. Your vehicle's ability to take corners faster and keep your wheels on the ground is severely hindered when there is undesired movement in your sway bar. DST do-it-yourself Universal Sway Bar Lateral Locks prevent lateral movement or shifting in your sway bar. By installing locks less than a quarter of an inch from your existing sway bar mounts, you can prevent any unwanted movement in your sway bar.
The Ultimate D-I-Y
Not only will DST's Lateral Locks increase your sway bar efficiency, but with the prevention of unwanted movement, you can keep your sway bar from knocking or damaging other parts of your chassis. With several sizes available, these lateral locks are designed to fit any stock factory or aftermarket sway bar. This is a do-it-yourself product that is very simple to install. The lateral locks come in two half pieces that wrap of the sway bar and are locked in place with the provided bolts and wrench. DST's lateral locks will install right next to the existing sway bar bushing mount, so you will want to measure as close to this spot as possible. Using a digital caliper, or a crescent wrench and ruler, measure your sway bar diameter.
So D-I-Y its not even funny
How easy are these to install you ask? DST's lateral locks are the ultimate do-it-yourself suspension part. In just a few short minutes you can upgrade your sway bar and suspension set up. All you have to do is locate your sway bar mounts, tighten a couple of screws and head to the track. Here is a quick overview of this simple process.
Product Reviews for
- 5 Star (9)
-
-
- 82%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (1)
-
-
- 9%
-
- 2 Star (1)
-
-
- 9%
-
- 1 Star (0)
-
-
- 0%
-
DST Parts dll130
starstarstarstarstar" Great product "
Easy to install made of quality materials look rugged and impressive. Been on trucks rear sway bar for 3 weeks now and I have never had any problem with them. Never had to retighten them and their doing their job as advertised.
verified_user Verified Buyer - Joseph Lauricella - . DST Parts dll130 - 5 out of 5starstarstarstarstar" Review 1 Year Later "
They worked perfectly holds the sway bay on my 2001 wrangler in place.
verified_user Verified Buyer - Richard Seaman - . DST Parts dll130 - 5 out of 5starstarstarstarstar" Review 1 Year Later "
The parts I ordered have worked flawlessly.
verified_user Verified Buyer - Corey B. Van Vorce - . DST Parts dll130 - 5 out of 5starstarstar_borderstar_borderstar_border" Review 2 Years Later "
Went on easy 2 years ago, but when I tried to take them off after a year to transfer to my new car, the small screws that clamp the two pieces together seized. I had no way to take them off so I just left them on.. they worked to keep the bar from drifting too much laterally, but dont plan on removing them if you do any driving in the winter.
verified_user Verified Buyer - Joel Zeller - . DST Parts dll130 - 2 out of 5