moog-515052 | Front Wheel Hub Assembly | 1995-2003 Ford Explorer 4WD

  • moog-515052 Front Wheel Bearing and Hub Assembly
  • moog-515052 Front Wheel Bearing and Hub Assembly
  • moog-515052 Front Wheel Bearing and Hub Assembly
  • moog-515052 Front Wheel Bearing and Hub Assembly
  • moog-515052 Front Wheel Bearing and Hub Assembly

Front Wheel Bearing and Hub Assembly

Manufacturer: MOOG
Part Number: moog-515052
Price: $215.24

check_box Free Shipping!check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentFront Wheel Bearing and Hub Assembly moog-515052 fits these vehicles:
Details

moog-515052 | Front Wheel Hub Assembly | 1995-2003 Ford Explorer 4WD

1995 Ford Explorer
  • Fits 4WD vehicles ONLY
1996-2000 Ford Explorer
  • Fits AWD and 4WD vehicles
2001 Ford Explorer
  • Fits 4WD submodels: Postal, XLS, and Sport
  • Fits AWD submodels: Eddie Bauer, Limited, and XLT
2001-2005 Ford Explorer Sport Trac
  • Fits 4WD vehicles ONLY
2002-2003 Ford Explorer Sport
  • Fits 4WD vehicles with 2 door sport utility
2003-2008 Ford Ranger
  • Fits 4WD vehicles ONLY
2009 Ford Ranger
  • Fits 4WD vehicles with round connector and vehicles made through 09/14/2009
  • For 4WD vehicles with square connector and made from 09/14/2009 use 515129
2003-2010 Mazda B4000
  • Fits 4WD vehicles with round connector
  • For 4WD vehicles with square connector use 515129
1997-2001 Mercury Mountaineer
  • Fits 4WD and AWD vehicles

Moog wheel hub assemblies have been engineered to the highest of manufacturing standards, allowing them to set the industry standard for steering and suspension parts.

Moog Wheel Bearing and Hub Assemblies

Don't Live With All of Those Noises

Wishing you could get rid of that annoying grinding noise? You've probably been hearing it for a while, and the mechanic just said your wheel bearing and hub assembly needs replacing. Take it from the DST parts experts, go with a premium solution: Moog's wheel bearing and hub assemblies.

Moog wheel bearing and hub assembly
Moog wheel bearing and hub assembly

OE Design Flaws

The OE design of wheel bearing and hub assemblies is shoddy at best. Common symptoms of a failed OE wheel hub are:

  • Loose wheels leaning into the vehicle
  • Premature tire wear and poor handling
  • Snapping or clicking noise on turns
  • Humming or rattling when driving straight
  • Anti-lock Braking System (ABS) light is on

If you are experiencing any of these issues, get your vehicle checked out immediately.

Roll Form Design

All of Moog's Wheel Hub Assemblies are engineered to target these OE problems. One such feature is Moog's innovative roll form design. Moog's roll form design ensures consistent and optimal pre-load in your hub. With grease now equally spreading throughout the hub, the longevity of your wheel bearing and hub assembly increases greatly.

Moog wheel bearing and hub assembly
Moog wheel bearing and hub assembly

ABS Molded Shield and Socket Connections

Moog's wheel bearing and hubs also feature an ABS with molded shield and socket connections. This provides maximum defense against contamination. With this addition, Moog's hubs are much more resistant to the premature wear that plagues OE hub assemblies.

Moog Abrasion-Resistant ABS Cord

Moog wheel hub assemblies include an ABS cord coated with a blended material designed to provide superior ABS protection. This helps increase abrasion resistance and protects against adverse conditions. Unlike the OE ABS cords, Moog's cords will last longer and resist cuts or rips much better than the OE design.

Moog wheel bearing and hub assembly
Moog wheel bearing and hub assembly

Quad Lip Seal Design

Moog's hub assemblies come equipped with a quad lip seal design. The design provides a securely-sealed environment that the OE design doesn't have. This, yet again, makes Moog's hubs more resistant to contamination, which will help extend the life of the part.

Precision Match Components

When you buy a Moog wheel hub assembly from our warehouse in Stephenville, you can be assured that the components are precision matched. Moog sees to this by strictly controlling the manufacturing process to ensure exact matching of bearings and rolling elements, delivering superior performance and minimizing noise and vibration.

Moog wheel bearing and hub assembly
Moog wheel bearing and hub assembly

Coated Wheel Stud Bolts

The wheel studs on Moog hub assemblies feature a protective coating that helps prevent rust and corrosion. The protective coating will allow easier removal and proper torquing of the wheel, cutting down on installation time and any future servicing that you might have.

Parts Engineered to the Highest of Standards

Moog wheel hub assemblies have been engineered to the highest of manufacturing standards, allowing them to set the industry standard for steering and suspension parts. Moog hub assemblies are performance-proven, quality-tested, and are available for many vehicles, both foreign and domestic. If that wasn't enough, Moog's wheel bearing and hub assemblies also come with a 3-year warranty that, if you should ever need it. If you need a little help finding a Moog wheel hub assembly for your vehicle then don't hesitate to call DST's customer service team, they'll be happy to help you with anything you may need.

Moog wheel bearing and hub assembly

question_answer Customer Questions and Answers


Question:
I have had the moog-515052 installed on my Ranger for about 22 months and one has failed. How do I warranty my failed Moog hub?
Answer:
Moog warranties are to be handled by the original dealer of the Moog part. If you ordered the hub from our site, we offer a 3 year warranty that we handle in house. Please give us a call with your order ID number and we will be happy to start the war rranty with you. ...see more

Question:
Can you please tell me if the ABS sensor has a round or square connector on part number 515052?
Answer:
On part number 515052, the ABS sensor has a round connector.

Question:
Is the price of part number 515052 for 1 or 2 hub assemblies?
Answer:
The price of part number 515052 is for 1 hub assembly.

Question:
Will part number 515050 fit my 2004 Ford Explorer Sport Trac?
Answer:
Yes, part number 515052 will fit the 2004 Ford Explorer Sport Trac.