moog-515056 | Front Wheel Assembly | 2003-2005 Ford Excursion 4WD

  • moog-515056 Front Wheel Bearing and Hub Assembly
  • moog-515056 Front Wheel Bearing and Hub Assembly
  • moog-515056 Front Wheel Bearing and Hub Assembly
  • moog-515056 Front Wheel Bearing and Hub Assembly
  • moog-515056 Front Wheel Bearing and Hub Assembly

Front Wheel Bearing and Hub Assembly

Manufacturer: MOOG
Part Number: moog-515056
Price: $330.74

check_box Free Shipping!check_box In Stock check_box Ships Immediately


  • Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.

    WARRANTY:

    Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.

    Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.

    If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.

    Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)

question_answer Ask us a Question

FitmentFront Wheel Bearing and Hub Assembly moog-515056 fits these vehicles:
Details

moog-515056 | Front Wheel Assembly | 2003-2005 Ford Excursion 4WD

2003-2005 Ford Excursion
  • Fits 4WD vehicles with 61.1mm length
2003-2004 Ford F-250 Super Duty and 2003-2004 Ford F-350 Super Duty
  • Fits 4WD vehicles with 4-wheel ABS, 61.1mm legth, 14mm-1.5mm fine thread, and without dual rear wheels
  • For 4WD vehicles with 4-wheel ABS, 45.7mm length, 14mm-2.00mm coarse thread, and with dual rear wheels use 515057
  • For 4WD vehicles with 4-wheel ABS, 60.5mm length, 14mm-2.00mm coarse thread, and without dual rear wheels use 515020
  • For RWD vehicles use 515100

Moog wheel hub assemblies have been engineered to the highest of manufacturing standards, allowing them to set the industry standard for steering and suspension parts.

Moog Wheel Bearing and Hub Assemblies

Don't Live With All of Those Noises

Wishing you could get rid of that annoying grinding noise? You've probably been hearing it for a while, and the mechanic just said your wheel bearing and hub assembly needs replacing. Take it from the DST parts experts, go with a premium solution: Moog's wheel bearing and hub assemblies.

Moog wheel bearing and hub assembly
Moog wheel bearing and hub assembly

OE Design Flaws

The OE design of wheel bearing and hub assemblies is shoddy at best. Common symptoms of a failed OE wheel hub are:

  • Loose wheels leaning into the vehicle
  • Premature tire wear and poor handling
  • Snapping or clicking noise on turns
  • Humming or rattling when driving straight
  • Anti-lock Braking System (ABS) light is on

If you are experiencing any of these issues, get your vehicle checked out immediately.

Roll Form Design

All of Moog's Wheel Hub Assemblies are engineered to target these OE problems. One such feature is Moog's innovative roll form design. Moog's roll form design ensures consistent and optimal pre-load in your hub. With grease now equally spreading throughout the hub, the longevity of your wheel bearing and hub assembly increases greatly.

Moog wheel bearing and hub assembly
Moog wheel bearing and hub assembly

ABS Molded Shield and Socket Connections

Moog's wheel bearing and hubs also feature an ABS with molded shield and socket connections. This provides maximum defense against contamination. With this addition, Moog's hubs are much more resistant to the premature wear that plagues OE hub assemblies.

Moog Abrasion-Resistant ABS Cord

Moog wheel hub assemblies include an ABS cord coated with a blended material designed to provide superior ABS protection. This helps increase abrasion resistance and protects against adverse conditions. Unlike the OE ABS cords, Moog's cords will last longer and resist cuts or rips much better than the OE design.

Moog wheel bearing and hub assembly
Moog wheel bearing and hub assembly

Quad Lip Seal Design

Moog's hub assemblies come equipped with a quad lip seal design. The design provides a securely-sealed environment that the OE design doesn't have. This, yet again, makes Moog's hubs more resistant to contamination, which will help extend the life of the part.

Precision Match Components

When you buy a Moog wheel hub assembly from our warehouse in Stephenville, you can be assured that the components are precision matched. Moog sees to this by strictly controlling the manufacturing process to ensure exact matching of bearings and rolling elements, delivering superior performance and minimizing noise and vibration.

Moog wheel bearing and hub assembly
Moog wheel bearing and hub assembly

Coated Wheel Stud Bolts

The wheel studs on Moog hub assemblies feature a protective coating that helps prevent rust and corrosion. The protective coating will allow easier removal and proper torquing of the wheel, cutting down on installation time and any future servicing that you might have.

Parts Engineered to the Highest of Standards

Moog wheel hub assemblies have been engineered to the highest of manufacturing standards, allowing them to set the industry standard for steering and suspension parts. Moog hub assemblies are performance-proven, quality-tested, and are available for many vehicles, both foreign and domestic. If that wasn't enough, Moog's wheel bearing and hub assemblies also come with a 3-year warranty that, if you should ever need it. If you need a little help finding a Moog wheel hub assembly for your vehicle then don't hesitate to call DST's customer service team, they'll be happy to help you with anything you may need.

Moog wheel bearing and hub assembly
Fitment for moog-515056
MakeModelYear RangePositionDrive WheelQuantity RequiredEngine BaseEngine VINEngine Designation
FordExcursion2005-2003Front4WD Quantity 2
FordF-250 Super Duty2004-2003Front4WD Quantity 2
FordF-350 Super Duty2004-2003Front4WD Quantity 2

question_answer Customer Questions and Answers


Question:
Is part number 515056 the pair of hubs or is it just one?
Answer:
Part number 515056 is sold individually.

Question:
Does part number 515056 have ABS and what size bolts does it have?
Answer:
Yes, part number 515056 has the ABS cable/sensor and the bolts are M14x1.5.

Question:
Are these units pre-lubed or do they need lubed prior to installation?
Answer:
moog-515056 is lubed as it is manufactured and sealed. Does not need any further maintenance.

Question:
Can you tell which Moog part I need for the front hubs?
Answer:
Your Excursion would use the Moog 515056 hub assembly.

Question:
Does part # 515056 come with the 4-studs needed to connect to the hub assy to the axle?
Answer:
Moog-515056 does not include the bolts that attach the hub assembly to the front axle.

Question:
Is moog-515056 new or remanufactured?
Answer:
Part Number moog-515056 is a new part.

Question:
Just purchased hub #515056. Are there any lube instructions or is this sealed unit ready to install? The installation instructions do not cover this issue.
Answer:
These units are all sealed and ready to be installed, there is no need for lubrication.

Question:
There are 2 listings for a front wheel bearing hub assembly 515020 and a 515056 what is the difference?
Answer:
part number 515020 has a ABS cable length of 60.5mm and coarse thread studs of m14 x 2. part number 515056 has a ABS cable length of 61.1mm and a find thread stud of m14 x 1.5.

Question:
How do I know if I need part number 515056 or 515020 for my 2004 Ford F-250 4x4?
Answer:
For the 2004 Ford F-250 4x4, you will need to know what coarse thread studs you have. 515056 has M14x1.5 and 515020 has M14x2.

Question:
Will part number 515056 fit my 2003 ford f250 superduty 4wd with dual rear wheels?
Answer:
No, part number 515056 will not fit the 2003 ford f250 superduty 4wd with dual rear wheels. You would need part number 515057 for the dual rear wheels.