lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Knuckle Assemblies carry a 3 Year or 36,000 mile Warranty (whichever occurs first). And Moog CV Axles carry a 2 Year Warranty. Above warranties are based on customers who own a car, van, SUV or light truck (less than 8,000 lbs. or 3,625 kilograms).
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Limited to ONE replacement during guarantee period
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Moog King Bolts
Before ball joints became the standard, there were king bolts. Designed to be the pivot point between your steering system and the wheels, king bolts were, and in some cases still are, a necessary part of your suspension. Moog offers entire king bolt kits for both older model vehicles and some heavy-duty trucks. These kits include everything from the bolts themselves down to the bearings and grease fittings. Additionally, Moog covers each of their king bolt kits with a lifetime warranty handled in-house here at DST.
| Overview | |
|---|---|
| Grade | Premium |
| Dimensions | |
|---|---|
| King Pin Length | 177mm (6.969 in) |
| King Pin Diameter | 26.8mm (1.054 in) |
| Materials, color & finish | |
|---|---|
| Bushing Material | Metal Bushing |
| What's included | |
|---|---|
| Bushings Included | Yes |
question_answer Customer Questions and Answers
- Question:
- Hi What is the OD on these king pins?
- Answer:
- The OD of the king pin is 1.054 inches.
- Question:
- I just bought the kingpin kit for my 1986 Ford f250 and I wondered if the bushings needed to be reamed before installation or if it was press fit with the pin.
- Answer:
- After the brass bushings are installed in the spindle the bushing would need to the reamed to fit the kingpin.
- Question:
- What is the difference between MOOG 8551B and 8589B king pin sets on the 1981 ford f100?
- Answer:
- For the 1981 ford f100, the 8551B is for the 4700 GVW front suspension. Moog 8589b if the 5000-5150 gvw front suspension.
- Question:
- Do I need a reamer for part number 8589b?
- Answer:
- Yes, you will need a reamer for part number 8589b.
- Question:
- Are the bushings in your 8589B kit brass or steel.
- Answer:
- Moog-8589b bushing is brass lined steel.