lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Moog Tie Rods
Connecting the Driver to the Vehicle
Tie rods are a crucial part of your steering system. When you turn your steering wheel the motion travels through the steering rack, through the tie rods, and finally through your steering arm or spindle. Without tie rods, you wouldn't be able to turn your car. This part is also incredibly important to your vehicle's alignment. If you replace your tie rods, make sure to get an alignment done immediately afterward.
Designed for Strength, Durability, and Longevity
Moog tie rods feature several differences from the OE. One of the more obvious differences is the overall design itself. Whereas many OE tie rods are two-piece assemblies, Moog's tie rods are forged one-piece units. This one-piece design reduces the chance of early wear, increasing the durability of the part as a whole. To protect your tie rod, Moog uses a neoprene-sealed rubber dust boot. This dust boot is resistant to both extreme temperatures and abrasion. The design for this rubber boot includes a small valve to allow for the flushing of old grease and contaminants. In addition to all these other features, Moog crafts their tie rod end using hardened full-ball metal studs. These hardened studs can stand up to much more than the OE, making the tie rod that much more dependable.
Product Reviews for moog-es2234r | Front Right Outer Tie Rod End | Chevrolet Blazer | MOOG
- 5 Star (3)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
MOOG moog-es2234r
starstarstarstarstar" perfect "
Excellent piece! Use nothing but the best. Moog!
verified_user Verified Buyer - william davis - . MOOG moog-es2234r - 5 out of 5starstarstarstarstar" perfect "
Excellent piece! Use nothing but the best. Moog!
verified_user Verified Buyer - william davis - . MOOG moog-es2234r - 5 out of 5starstarstarstarstar" perfect "
Excellent piece! Use nothing but the best. Moog!
verified_user Verified Buyer - william davis - . MOOG moog-es2234r - 5 out of 5question_answer Customer Questions and Answers
- Question:
- Can I buy just the rubber boot for this alone? Or a suitable sub part #.
- Answer:
- Moog does not sell just the dust boot. I have universal polyurethane dust boots that are sold by dimensions. Put this link in a Google or Yahoo search: https://www.suspension.com/universal-dust-boots.asp. It will come up to show what we offer.
- Question:
- What is the rod diameter for moog-es2027l.
- Answer:
- Here are the specs for es2234r: End 1 Thread Diameter (IN) 0.875 End 1 Gender MALE End 2 Gender Male End 1 Thread Direction Clockwise Length - Stud Center To End (IN) 4.810 End 1 Threads Per Inch 18
- Question:
- This truck had a custom steering setup built and I am trying to find what tie rod ends they used. This looks like the right one except that its a right hand thread. Is there a tie rod end with the same dimensions but a left hand thread available?
- Answer:
- As a dealer of Moog products we can only suggest part by year, make and model. Because of liability reasons we can not pick tie rods by dimensions. The steering is designed to operate specific angle and planes and if this changed the will effect stee ering, handling and brake performance. ...see more