lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Strut Assemblies carry a 3 Year Warranty.
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Moog's Tie Rod Adjusting Sleeves
Moog's Tie Rod Adjusting Sleeves join the tie rod ends to the steering linkage and allowing your vehicle to be aligned properly. These sleeves are coated for corrosion resistance and are made of steel for durability. All Moog tie rod sleeves are backed with a lifetime warranty handled in house at DST.
question_answer Customer Questions and Answers
- Do you have thread sizing on this adjusting sleeve?
- Tie Rod adjusting sleeve ES3368S diameters: Length: 4.53 Diameter: 0.929 Thread size end 1: M18-1.5L Thread size end 2: M18-1.5R
- what is shaft size and is it left and right threads
- The length is 4.53, the Diameter is 0.929. The internal thread side A is M18-1.5L and the internal Thread side B is M18-1.5R