lock Warranty Information keyboard_arrow_down
Moog fulfills their warranty through their individual dealers. That means that in order to receive warranty support, you will have to refer back to the original dealer you purchased the part from. Be sure to check the dealer's warranty support before you buy the part to make sure that they will properly support the warranty. If a dealer will only refer you back to the manufacturer in order to receive warranty support, then you may not actually have any warranty at all.
Part of our warranty process includes reviewing evidence of the defect provided by the customer. This is easily accomplished by providing video or images of the defective part so our staff can verify the claim and move forward with the warranty process. This removes the necessity of shipping the part back to our facility at the customer's expense.
WARRANTY:
Moog Premium Steering Components carry a Limited Lifetime Warranty. Moog R-Series Control Arms, Hub Assemblies, and Knuckle Assemblies carry a 3 Year or 36,000 mile Warranty (whichever occurs first). And Moog CV Axles carry a 2 Year Warranty. Above warranties are based on customers who own a car, van, SUV or light truck (less than 8,000 lbs. or 3,625 kilograms).
Moog warranties their parts to be free of defects in materials and/or workmanship during these timeframes as measured from the date of purchase.
If a Moog part should fail due to materials or manufacturing defect while under warranty, we will provide a replacement of the part upon return of the defective part.
Limited to ONE replacement during guarantee period
Wearable RUBBER parts are not covered under warranty (Dust boots, bushings, bump stops, etc.)
Front Outer Tie Rod | '99-'06 Silverado & Sierra 1500
Stop Sloppy Steering
If you've noticed a steering wheel vibration or odd wear on the edges of your tires then it's probably time for a steering refresh. Tighten up the steering of your 1999-2006 Chevy Silverado or GMC Sierra with a new Moog outer tie rod end. Improve your only connection to the road with the help of Moog and make sure your steering is up to snuff.
Bad Vibes
A truck that has tangled with a few potholes likely has worn out tie rods from the force of the road smashing into your steering. Worn out parts and their loose tolerances cause vibrations as your tires wobble back and forth and also create that odd edge wear you may have noticed. Get your steering back on track with a new Moog tie rod end and help your tires last longer.
Intelligent Design
Not only will a Moog tie rod help your tires last longer, Moog included multiple features that extend the life of their tie rod end. Each Problem Solver part from Moog includes a heat treated stud, a Belleville washer, provisions for a grease zerk, and a dust boot to protect the precise tolerances found inside each high quality suspension part. Choose the lasting solution for improving the steering of your Chevy or GMC and choose Moog.
Strengthen Your Steering
A new tie rod is a great idea for trucks that have upgraded wheels and tires or often travel more dirt trails than pavement. The additional weight of bigger tires or rough trails both contribute to wearing out your steering faster than normal. Make sure your steering is as capable as the rest of your truck with a new outer tie rod end from Moog.
Product Reviews for Front Outer Tie Rod | '99-'06 Silverado & Sierra 1500
- 5 Star (1)
-
-
- 100%
-
- 4 Star (0)
-
-
- 0%
-
- 3 Star (0)
-
-
- 0%
-
- 2 Star (0)
-
-
- 0%
-
- 1 Star (0)
-
-
- 0%
-
MOOG moog-es3493t
starstarstarstarstar" Fit just like the OEM parts. "
This was aa quick and easy install since I replaced the inner and outer at the same time. Good quality parts and after my alignment, my 2002 truck steers like it was brand new.
verified_user Verified Buyer - Steven Scoville - . MOOG moog-es3493t - 5 out of 5| Grade | Premium |
|---|---|
| Greaseable | Yes |
question_answer Customer Questions and Answers
- Question:
- Are the outer tie rods pre-greased before being packaged?
- Answer:
- Moog-es3493t is greased after it is assembled. This is to preserve the part while it sits on the shelf. It must be greased after it is installed and every oil change with HD chassis grease with the NLGI certification.
- Question:
- How do I get the zerk fitting onto the tie rod? I've always purchased Moog products for my vehicles, but have never had this much trouble with a zerk fitting.
- Answer:
- Put a small amount of grease on the threads of the zerk. Put pressure on the top of the zerk and start to screw in. As soon as the zerk is tight stop. Do not over tighten or the zerk could break off in the part.
- Question:
- What is the difference between es3492T and es3493t for the vehicle 2001 GMC Sierra 1500?
- Answer:
- Differences are: es3493T Power Steering; Gear Steering; Problem Solver - Powdered Metal Gusher Brg. For Better Lubrication es3492T https://www.suspension.com/moog-es3492t Power Steering; Rack Steering; Problem Solver - Powdered Metal Gusher Brg. Fo or Better Lubrication ...see more
- Question:
- Will this part ES3493T fit a 2003 Silverado ss with a rough country leveling kit?
- Answer:
- If you currently have OEM tie rods the Moog tie rods should fit.